Will changing the color of car position lights result in a fine?

2 Answers
HannahAnn
07/25/25 9:09pm
Changing the color of car position lights will result in a fine. Driving a vehicle with unauthorized modifications to lighting settings, appearance, or other technical parameters is considered a violation. According to relevant regulations, this offense will be penalized with the confiscation of the illegal modifications and a fine of 1,000 yuan. Here are some precautions regarding the use of position lights: 1. Position lights are warning lights used primarily in low-visibility weather conditions to alert other vehicles. 2. Since position lights also turn on when the headlights are activated, many drivers do not develop the habit of using position lights during daily driving—they either turn on the headlights directly or use no lights at all. 3. In hazy weather, during dusk, or in light rain, position lights can be used alone without turning on the low-beam headlights, making it easier for surrounding vehicles to identify your car.
Was this review help?
2
0
Share
LaMadeline
08/11/25 10:11pm
I often think about modifying car lights, especially changing the color of the parking lights, which could indeed result in fines. The key lies in the regulations, as different places have varying strictness. For example, China's traffic laws require parking lights to be only amber or white; otherwise, they might be mistaken for police or ambulance lights, posing accident risks. If caught, fines can range from 100 to 500, and points may be deducted. Safety-wise, it's even worse—significant color differences in lights can easily cause other drivers to misjudge at night or in foggy conditions. I suggest opting for legal decorative light strips if you truly want personalization—it's safer. Remember to check your local DMV website or call for advice beforehand to avoid regrets later. While modifying can be fun, following the rules is fundamental.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What does it mean when a yellow exclamation mark appears on the steering wheel and the car won't start?

A yellow exclamation mark on the steering wheel and the car not starting is an indication of the electric power steering system warning light, which means there is a fault in the electric power steering system. Below are specific details about the steering wheel indicator light: 1. A yellow indicator light indicates that the steering system is partially malfunctioning, and turning the steering wheel requires more force. 2. A red indicator light indicates that the steering system is completely malfunctioning, and its function has failed, requiring very high force to turn the steering wheel. Additional information: The steering wheel is a wheel-like device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The steering wheel, through the gear system introduced between the driver and the wheels, operates flexibly and effectively isolates intense vibrations from the road.
1
1
Share

What are the reasons for the Baojun 730 low beam not working?

Baojun 730 low beam not working reasons are as follows: Dead battery: You can check the battery power by pressing the horn. If you forget to turn off electrical devices overnight, the next morning you may not be able to start the car, and even the low beam won't turn on. Bulb damage: Most bulbs have a certain service life. When nearing the end of their lifespan, the light intensity becomes substandard, and they generate excessive heat until the filament burns out. Additionally, there are other reasons such as water entering the headlight assembly after vehicle wading. When hot bulbs come into contact with water droplets, the sudden temperature drop may cause cracking and damage. Blown fuse: Most low beam fuses can be found in the engine compartment fuse box or the fuse box on the left side of the instrument panel. The fuse diagram is usually printed on the back of the fuse box cover. You can use a specialized clip to remove and inspect it. Low beam control circuit malfunction: It may be due to issues with the light control switch. In this case, you should take the vehicle to a repair shop for inspection to determine if there are any abnormalities in the light switch control logic.
16
2
Share

Does the Dash Cam Still Work After the Car is Turned Off?

It depends on various situations, mainly determined by how it is wired. Here are the specific details: 1. Connected to constant power: Works 24/7. 2. Connected to ACC power: Automatically turns on when the car key is turned to ACC or the engine is started, and continues to work normally if the car is turned off but still in ACC mode. 3. Connected to the cigarette lighter: If the cigarette lighter still has power after the car is turned off, the dash cam will continue to work; if the cigarette lighter loses power after the car is turned off, the dash cam will shut down. 4. Dash cam with built-in battery: Even if the car does not supply power, the dash cam will continue to work automatically if not turned off when the owner leaves the car, until the battery is depleted.
3
1
Share

How to reset the tire pressure on an Audi A3?

Audi A3 tire pressure reset method is: 1. Start the car and enter the main menu to find the tire pressure monitoring system; 2. Reset the tire pressure data and save it, then turn off the vehicle; 3. Restart the vehicle to complete the tire pressure reset. Taking the Audi A3 2021 model as an example, its body dimensions are: length 4351mm, width 1815mm, height 1458mm, with a wheelbase of 2630mm. The Audi A3 2021 model is equipped with a 1.4T turbocharged engine, with a maximum power of 110kw and a maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
19
5
Share

What Causes the Noise When Braking Sometimes?

The reasons for occasional noise when braking are: 1. There are metal particles or small gravel between the brake pads and brake discs; 2. Excessive wear of the brake discs or brake drums; 3. The brake pads are too hard; 4. Rust on the brake calipers; 5. The handbrake cable is not flexible; 6. The brake master cylinder returns slowly. Solutions for brake noise include: 1. Check if there is a lubrication issue with the top rubber or buffer rubber of the shock absorber; 2. Break in new brake friction pads; 3. Replace brake pads in time; 4. Clean foreign objects on the surface of the brake discs. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery.
7
4
Share

What Causes a Sudden Loss of Response in the Car's 360-Degree Panoramic System?

When the car's 360-degree panoramic system suddenly stops responding, it could be due to screen malfunction, wiring issues, battery module problems, or power supply faults. It is recommended to consult a professional for inspection and troubleshooting. How the 360-Degree Panoramic System Works: The system uses four ultra-wide-angle lenses positioned at the front, rear, left, and right of the vehicle to capture real-time images of their respective areas. These images are then processed by an image processing unit to correct distortion, adjust perspective, and stitch them together, ultimately displaying a complete real-time 360-degree bird's-eye view on the central control screen. This view provides an intuitive display of the vehicle's surroundings, enabling safer and more reliable parking. The Role of the 360-Degree Panoramic System: The 360-degree panoramic system helps eliminate blind spots for the driver. By providing a full-coverage driving record, it effectively reduces the occurrence of accidents such as scratches or staged collisions, ensuring safer driving.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.