Will changing lanes over solid lines on highways be captured by cameras?

1 Answers
MacHarrison
07/29/25 1:17pm
Changing lanes over solid lines on highways will be captured by cameras. According to regulations, lane changes are permitted at dashed line positions without affecting the normal driving of other vehicles, but lane changes are not allowed at solid lines. After the implementation of the new regulations on the application and use of motor vehicle driving licenses, penalties including fines and a deduction of 2 points will be imposed for behaviors such as overtaking by borrowing lanes or occupying oncoming lanes when encountering queued or slow-moving vehicles ahead, or weaving through waiting vehicles. Highway violations captured by cameras include: 1. Changing lanes over solid lines; 2. Speeding; 3. Obstructing license plates; 4. Illegal reversing on highways; 5. Not wearing seat belts as required; 6. Failing to use turn signals as required; 7. Randomly stopping on hard shoulders or emergency lanes on highways; 8. Drivers smoking and other uncivilized driving behaviors.
Was this review help?
6
4
Share
More Forum Discussions

What is the fuel consumption of the Ford Explorer 2.3t?

The fuel consumption of the Ford Explorer ranges from 11.0L to 14.0L. Below are some relevant details about fuel consumption: Factors affecting fuel consumption: Poor driving habits such as aggressive lane changes, sudden stops and starts, and driving at high speeds in low gear can all increase a car's fuel consumption. Carbon buildup in the engine can also lead to higher fuel consumption. Low tire pressure and underinflated tires can contribute to increased fuel consumption. It's advisable to check tire inflation before driving, and using a tire pressure gauge can help monitor this. Properly inflating tires can help reduce fuel consumption. Carrying excessive items in the trunk can also increase fuel consumption. Regularly clearing out unnecessary items from the trunk can help lower fuel usage. Methods to reduce fuel consumption: Maintain a steady speed while driving, avoid sudden braking and acceleration, and ensure regular vehicle maintenance.
9
3
Share

Is it necessary to install running boards on the 2019 new CR-V?

19 new CR-V has the necessity to install running boards. Below are the specific advantages and disadvantages of installing running boards: Easy to fall off: Running boards are mainly fixed with adhesive, and the quality of products on the market varies. Many inferior running boards will fall off shortly after use, and adhesive marks will remain after removal. Increased fuel consumption: Adhesive-fixed running boards cannot be retracted, increasing the width of the car. Installing running boards will make the car body heavier, thereby increasing fuel consumption. High practicality: For mid-size and large SUVs, it is necessary to install running boards. The higher ground clearance makes it convenient for the elderly and children in the family to get in and out of the car.
13
3
Share

Is 4WD Full-Time Four-Wheel Drive or Part-Time Four-Wheel Drive?

4WD stands for four-wheel drive. Below is a detailed introduction to the different four-wheel drive system modes: 1. Full-time drive: The front and rear wheels always maintain a four-wheel drive mode, with the engine output torque distributed 50:50 between the front and rear wheels during driving. Full-time drive offers excellent driving control and tracking performance but is less fuel-efficient and not very economical. 2. Part-time drive: The driver can switch between two-wheel drive or four-wheel drive mode by engaging or disengaging the transfer case based on road conditions. This is the most common drive mode for general off-road vehicles or 4WD SUVs. 3. On-demand drive: The drive mode is controlled by the computer. Normally, (front) rear-wheel drive is used on regular roads. If the road conditions are poor or the drive wheels slip, the computer automatically detects it and immediately redistributes the engine output torque to the other two wheels, switching to four-wheel drive mode. This system is simple to operate.
9
2
Share

What to Pay Attention to When Buying a Car

When buying a car, you need to pay attention to confirming purchasing power, key considerations, on-site confirmation, etc. The specific details are as follows: Confirming Purchasing Power: Determine your purchasing power to ensure that buying a car does not affect the overall quality of life for your family. Generally, this is based on the family's average income over the past three years. Typically, 20% of the family's income over three years can be allocated, but it should not exceed 10% of the family's fixed asset value. Key Considerations: For family cars, safety is the most important factor, followed by affordability. Since a car's safety carries the lives of the entire family, safety is the top priority. On-Site Confirmation: Based on the above two steps, narrow down the car models you are interested in. Visit the 4S store in person for on-site confirmation, including test drives, price inquiries, loan options, maintenance, and other related details.
15
2
Share

What is the tread depth of car tires?

Tire tread depth standards are as follows: greater than 3.5mm indicates good condition, 2.5~3.5mm is normal condition, less than 2.5mm requires replacement, and the tread must be replaced when it reaches the limit value of 1.6mm. Below is some information about car tire tread depth: 1. National regulations: According to national standards, the wear limit for radial tires used in passenger cars is 1.6mm, while the wear limit for radial tires used in trucks and buses is 2.0mm. Therefore, when the tread of a passenger car wears down to 1.6mm, it must be replaced, and tires used in trucks and buses must be replaced when the tread depth reaches 2.0mm. 2. Inspection methods: Check using the tread wear indicators built into the tire; when the tread wear indicators are flush with the tread surface, the tire needs to be replaced. Alternatively, use a tire tread depth gauge to measure the tread depth.
1
3
Share

Why Can't the Car Start After Leaving the Headlights On for 20 Minutes?

The reasons why the car can't start after leaving the headlights on for 20 minutes are as follows: 1. Insufficient Voltage: When the battery voltage is insufficient, the horn and lights may still work, but they cannot power the starter. The battery light will illuminate when the key is in the ON position before starting the engine, indicating low battery voltage. Use a voltmeter to test the battery voltage. If it is below 10V, consider replacing the battery. 2. Poor Fuel Quality: Check the quality of the fuel added to the car to see if it is caused by carbon deposits. If the car has been driven around 20,000 kilometers, focus on inspecting and cleaning the throttle body and checking the ignition switch. Test and inspect the starter, fuel pump, sensors, and other components related to the starting and fuel supply systems. Additionally, after turning on the ignition, wait for 30 seconds to a minute before starting the engine to see if it makes a difference.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.