Will Car Windshield Washer Fluid Freeze?

How Many Kilometers Should a Gasoline Filter Be Replaced?

Gasoline filters should be replaced every 30,000 kilometers. If the fuel contains a high level of impurities, the replacement interval should be shortened accordingly. The specific replacement timing can be referred to the vehicle's manual. Gasoline filters are divided into two types: external and internal. Most vehicles use external filters, which are simple to replace—the connections between the gasoline filter and the fuel lines are secured with clips, allowing for easy removal and insertion. The primary function of the gasoline filter is to remove impurities from the fuel. It is located on the inlet side of the fuel pump, where the working pressure is relatively low, and typically features a nylon casing. For fuel-injected engines, the gasoline filter is located on the outlet side of the fuel pump, where the working pressure is higher, and usually comes with a metal casing.

13

1

Share

What Causes the Engine to Stall When Accelerating?

Reasons for engine stalling when accelerating: 1. Dirty throttle body with contaminants: This condition reduces or causes the throttle plate to stick during acceleration, leading to stalling. The solution is to clean or replace the throttle body and perform throttle matching. 2. Faulty ignition coil, open or short circuit: For ignition coil troubleshooting, when visual inspection and resistance measurement fail to provide accurate diagnosis, replace with a new ignition coil. 3. Clogged fuel filter: Restricted fuel flow during acceleration. Replacing the fuel filter resolves this acceleration stalling issue. 4. Faulty mass air flow sensor: Requires replacement. 5. Fuel pump malfunction.

10

0

Share

Can Different Car Antifreeze Be Mixed Together?

Car antifreeze should not be mixed together. Different brands of coolant contain various types of additives such as corrosion inhibitors, rust inhibitors, antifoaming agents, and dyes, each with distinct chemical compositions. Mixing them can lead to chemical reactions, causing sedimentation, scaling, and corrosion, which may harm the engine's lifespan. Antifreeze is designed to prevent the coolant from freezing during cold winter conditions, which could otherwise crack the radiator or damage the engine block. It is a specially formulated coolant containing unique additives, primarily used in liquid-cooled engine cooling systems, offering excellent properties such as freeze protection in winter, boil-over prevention in summer, and year-round anti-scaling and anti-corrosion benefits.

18

1

Share

What is the tire pressure for the Geely Emgrand GS?

The normal tire pressure range for the Geely Emgrand GS is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Geely Emgrand GS is equipped with an active tire pressure monitoring system (TPMS), which automatically monitors tire pressure while driving. However, it does not display the specific pressure or temperature values for each tire, only the TPMS warning symbol and an abnormal tire pressure warning symbol. When tire pressure is abnormal, the Geely Emgrand GS tire pressure warning light will illuminate. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout. If the tire pressure monitoring indicator light (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside) illuminates, there are generally three possible reasons: Abnormal tire pressure: Typically, an alarm is triggered when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. Damaged sensors must be replaced with new ones.

3

5

Share

What is the AC button in a car?

Car's AC button is the air conditioning cooling switch. Pressing the AC button will gradually lower the temperature inside the vehicle. The automotive air conditioning refrigeration system consists of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These parts are connected by copper pipes and high-pressure rubber hoses to form a sealed system. Automotive air conditioning refers to the air conditioning device installed in vehicles, capable of cooling, heating, ventilating, and purifying the air inside the cabin, providing passengers with a comfortable environment, reducing driver fatigue, and improving driving safety. Different types of air conditioning systems have varying layout methods, with integrated heating and cooling systems being widely used in passenger cars today.

10

3

Share

What does the Buick 'Service Vehicle Soon' warning mean?

When a Buick displays the 'Service Vehicle Soon' warning, it indicates a fault that significantly affects the engine's smooth operation. Below is an introduction to the related issues: 1. Fault in various engine sensors: Sensors crucial for engine operation, such as the camshaft sensor, crankshaft sensor, and coolant temperature sensor, may malfunction, accompanied by abnormal engine operation and vibration. 2. ABS system sensor fault: A malfunction in the wheel speed sensor, which also triggers the ABS warning light. 3. Engine oil deficiency: This can lead to severe engine wear and requires immediate oil replenishment.

7

0

Share

Will Car Windshield Washer Fluid Freeze?

How Many Kilometers Should a Gasoline Filter Be Replaced?

What Causes the Engine to Stall When Accelerating?

Can Different Car Antifreeze Be Mixed Together?

What is the tire pressure for the Geely Emgrand GS?

What is the AC button in a car?

What does the Buick 'Service Vehicle Soon' warning mean?

How to Turn Off the Radio in Emgrand GL?

How to Turn Off the Radio in a Sagitar?

What to Do When One-Touch Window Control Fails?

What is the function of a voltage regulator?