Will blending clear coat damage the original paint?

What are the time regulations for vehicle inspection?

The time regulations for vehicle inspection are as follows: 1. Non-commercial passenger cars, including non-commercial sedans, small and micro passenger vehicles, starting from November 20, 2020, 7 to 9-seat non-commercial small and micro passenger vehicles (excluding minivans) are included in the exemption range and are exempt from on-site inspection within 6 years, only requiring an inspection mark application every two years; 2. Starting from November 20, 2020, for vehicles over 6 years but less than 10 years old, the inspection cycle is relaxed from once a year to once every two years. That is, private cars within 10 years only need to undergo on-site inspection twice, specifically in the 6th and 8th years; 3. For private cars over 10 years old, the original inspection cycle still applies, meaning once a year for 10-15 years, and once every six months for over 15 years; 4. Commercial passenger vehicles must be inspected once a year within 5 years; for those over 5 years old, inspection is required every six months; 5. Trucks and large and medium-sized non-commercial passenger vehicles must be inspected once a year within 10 years, and every six months for those over 10 years old; 6. Motorcycles must be inspected once every two years within 4 years, and once a year for those over 4 years old.

13

4

Share

What Are the Reasons for Higher Fuel Consumption in Cars During Winter?

Here is an introduction to the reasons for higher fuel consumption in cars during winter: 1. The engine requires a certain temperature to reach optimal working condition: The engine needs to reach a specific temperature, typically around 90 degrees, to operate efficiently and maintain normal fuel consumption. During winter, the outdoor temperature is lower, and the engine takes longer to warm up to its optimal working state after starting. As a result, fuel consumption tends to be higher compared to other seasons. 2. Poorer oil fluidity leads to higher fuel consumption: This is also related to temperature. In colder environments, engine oil becomes denser and less fluid, especially for oils with higher viscosity. Reduced fluidity hinders engine operation, requiring the engine to run longer to reach the necessary temperature for proper oil flow, thereby increasing fuel consumption. 3. Prolonged low-speed driving also increases fuel consumption: Generally, driving at speeds between 70-90 mph is most fuel-efficient. However, in winter, due to low temperatures, the engine runs colder, and its components operate less smoothly. Extended periods of low-speed driving can lead to higher fuel consumption. Additionally, winter often brings more rain, snow, and foggy conditions, necessitating slower driving for safety reasons.

10

0

Share

What lights should be used when driving at night with streetlights?

When driving at night under well-lit streetlight conditions, use low beam headlights. All vehicle lights are powered by the battery, which converts gasoline into electricity. Inefficient use of lights wastes gasoline, wears out bulbs, and damages lamp housings. Bulbs are consumable parts, so spare parts should be kept for timely replacement. Classification and usage of vehicle lights: Night driving lights, commonly known as "headlights." Headlights have two modes: high beam and low beam. Use low beam on urban roads with streetlights, and high beam on roads without streetlights or highways. When approaching intersections or overtaking, alternate between high and low beams to signal. Night width-indicator lights, commonly known as "parking lights." These are used to display the vehicle's width and length at night, alerting other drivers and pedestrians. When visibility through the rearview mirror is poor, including during rain, these lights should be turned on. Turn signals. These should be activated about 100 meters before a turn. Turning them on too late may catch following or oncoming vehicles and pedestrians off guard, leading to mistakes. When waiting in line at a traffic light to turn, unless you are first in line, there is no need to keep the signal flashing continuously. Wait until the vehicle starts moving to turn, otherwise it wastes battery and annoys following drivers. Brake lights. These inform following vehicles to slow down or stop. Malfunctioning brake lights can easily cause rear-end collisions. The dual-filament bulbs in brake lights are much more powerful than regular bulbs and generate significant heat. Keeping the brake pedal depressed for extended periods will keep the brake lights on, reducing their lifespan and wasting electricity. Fog lights. These help improve visibility in foggy conditions and alert oncoming vehicles to take precautions for safe passing. Therefore, fog lights must be used in foggy weather and should not be replaced with parking lights. Fog lights typically have a power rating of 55W per bulb, similar to headlights, but with much less heat dissipation space. Always turn them off immediately after parking to prevent overheating and damaging the lamp housing.

2

4

Share

Is Wheel Alignment Necessary After Tire Repair?

Wheel alignment is not required after tire repair, but wheel balancing is necessary. The functions of wheel balancing for car tires are: 1. Enhancing driving comfort; 2. Extending tire service life; 3. Ensuring straight-line stability of the vehicle; 4. Reducing wear on chassis suspension components. The consequences of improper wheel balancing include: 1. Regular bouncing of tires during driving, causing steering wheel vibration; 2. Vehicle resonance occurring within certain speed ranges; 3. Uneven tire wear, affecting tire lifespan and driving safety; 4. Potential damage to suspension and bearings.

18

1

Share

Do new energy vehicles still need to pay purchase tax?

New energy vehicles are exempt from purchase tax. Here is the relevant information: 1. Exemption from vehicle purchase tax: Some pure electric vehicles with sales permits in China and qualified plug-in hybrid and fuel cell new energy vehicles are exempt from vehicle purchase tax. 2. Introduction to new energy vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new vehicle power devices), integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles and new technologies and structures.

9

5

Share

How to Use Brake Fluid?

Brake fluid usage method is: For different types of brake fluid, they cannot be mixed together, as this will reduce the braking effect of the car. Do not mix gasoline, diesel, or engine oil into the brake fluid. Car brake fluid is the liquid used in hydraulic brake systems, which must not cause chemical reactions, be unaffected by high temperatures, and not cause corrosion, softening, or expansion to metals and rubber. The volume of brake fluid changes with temperature, so the brake fluid reservoir is equipped with a vent hole. The air drawn in through this hole contains moisture or impurities, and the moisture will be absorbed or dissolved by the brake fluid. Therefore, brake fluid containing moisture will have a lower boiling point.

17

0

Share

Will blending clear coat damage the original paint?

What are the time regulations for vehicle inspection?

What Are the Reasons for Higher Fuel Consumption in Cars During Winter?

What lights should be used when driving at night with streetlights?

Is Wheel Alignment Necessary After Tire Repair?

Do new energy vehicles still need to pay purchase tax?

How to Use Brake Fluid?

What is the method to deactivate the Focus anti-theft system?

Can I Get a Refund After Enrolling in a Driving School?

How to Uncover the Car Cover in the Mercedes App?

How long does it take to get the driver's license after passing the full-score exam?