Will Asphalt Cleaner Corrode Car Paint?

2 Answers
VonAubree
07/24/25 1:12am
Asphalt cleaner can corrode car paint, with the extent of damage determined by the concentration of its ingredients. Asphalt cleaner is a powerful cleaning agent with certain corrosive properties. Long-term residue of asphalt cleaner on the car body can corrode the paint. Below is a detailed introduction about car paint: 1. Overview: Car paint has undergone three major leaps in history: alkyd (enamel) paint in the 1920s, acrylic (enamel) paint in the 1960s, and clear coat (urethane) paint in the 1980s. In the 20th century, automotive technology made significant leaps. For easier understanding, car paint can be simply categorized into standard paint and clear coat. 2. Additional Information: Car paint is a protective film sprayed onto cars, a type of coating that makes the car body less prone to corrosion and enhances its aesthetic appeal. Different car paints have different effects, and the quality of the paint itself, along with the technology and a good painting environment, is crucial.
Was this review help?
7
1
Share
MacRiley
08/10/25 8:49pm
My car got splattered with tar spots before, and I've tried several cleaners. Some inferior products can indeed damage the paint, leaving it dull and rough after use. The key is the formula—those containing strong solvents can easily corrode the clear coat. I opt for neutral formulas or those specifically labeled as safe for car bodies. When using them, you must rinse immediately, not letting the cleaner stay on the paint for more than 2 minutes. Spray it, quickly wipe with a wet cloth, and then rinse again with water. For stubborn stains that won’t come off, it’s better to go to a professional detailing shop for polishing rather than risking damaging the paint by messing around yourself.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What are the effects of driving without releasing the car's handbrake?

The effects of driving without releasing the car's handbrake are: 1. Increased wear on the brake discs; 2. Accelerated heating and hardening of the brake pads; 3. Accelerated tire wear; 4. Causing the rear wheels to lock or generate smoke due to friction; 5. Leading to the brake calipers seizing and brake fluid leakage; 6. Resulting in excessively high brake fluid temperature and loss of braking function. The purpose of the car's handbrake: To control the speed of the rear wheels. Precautions for using the handbrake: 1. Avoid pulling it too tightly to prevent the brake cable's function from deteriorating; 2. For automatic transmission cars, engage the handbrake before shifting to P; 3. When driving at high speeds, the handbrake cannot replace the foot brake; 4. Do not forget to engage the handbrake when stopped on a slope.
14
1
Share

What Causes the Brake Pad Noise in the 2018 Sagitar?

Here are the reasons for brake pad noise in the 2018 Sagitar: 1. If it's a sharp screeching sound, check if the brake pads are nearly worn out (the warning tab is making noise). If they are new pads, inspect for any foreign objects caught between the brake disc and pad. 2. If it's a dull thud, it's likely an issue with the brake caliper, such as worn slide pins or a detached spring plate. 3. If it's a hissing sound, the caliper, brake disc, or brake pads could be problematic. 4. If the noise persists, first check for dragging brakes—poor caliper retraction can cause prolonged friction between the disc and pad, leading to noise under certain conditions. Also, inspect for any debris stuck between the pad and disc. For new pads, check if the brake disc has grooves, as localized friction can cause noise. If the disc is fine, consider whether the brake pads are too hard or if the noise-damping shim was installed incorrectly.
8
1
Share

Does a Vehicle Body Extending Beyond the Parking Space Count as a Violation?

If the vehicle body extends beyond the parking space, it is not considered a violation as long as the wheels are within the parking lines. Areas where parking is prohibited: Curbs marked with yellow no-parking lines indicate areas where roadside parking or stopping is prohibited. The length of the marking indicates the extent of the no-parking zone. Yellow grid lines mark areas where parking is prohibited for any reason. These are typically found at intersections, entrances, and exits where temporary parking could cause traffic congestion. Special zones such as within 30 meters of bus stops, gas stations, emergency stations, and in front of fire stations do not allow temporary parking. Parking is also prohibited at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. Additionally, parking is not allowed on road sections with barriers separating motor vehicle lanes from non-motor vehicle lanes or sidewalks, as well as in crosswalks and construction zones.
2
1
Share

Why Do Mazdas Experience More Engine Blowouts?

This is an extremely rare occurrence. The engine bolts broke inside the cylinder block without any external force, which definitely does not indicate a quality issue. It might be caused by the driver applying excessive force when braking, or the use of counterfeit engine oil that softened and deteriorated the bolts, leading to the fracture. Mazda6 Introduction: The Mazda6 is a midsize sedan product globally launched by Mazda since 2003, replacing the Mazda626 and Millenia models, primarily targeting the sporty midsize car market. In 2015, the third-generation Mazda6 was introduced for localized production by FAW Car Co., Ltd. in Changchun, with the domestic model named Mazda6 Atenza. Mazda3 Introduction: The Mazda3 is a compact sedan product globally launched by Mazda since 2004, replacing the Mazda323 model, competing with the Volkswagen Golf and Honda Civic. The current fourth-generation Mazda3 debuted at the Los Angeles Auto Show in November 2018, being the first model to adopt the second-generation Kodo design language.
20
3
Share

Is There Depreciation Compensation for a Luxury Car Accident When the Other Party Is Fully at Fault?

Once a car is purchased and driven home, if an accident occurs during operation, theoretically, only the repair costs should be covered. If you insist on claiming depreciation compensation, first report to the police, then determine liability with the traffic police and negotiate with them to see how they handle it. Generally, there is no need to pay the so-called depreciation compensation. Additional extended information is as follows: 1. Overview: Vehicle safety is mainly divided into two major aspects: active safety and passive safety. Active safety involves controlling the car as smoothly as possible. Whether braking and accelerating in a straight line or steering left and right, it should be as stable as possible to avoid deviating from the intended path without affecting the driver's visibility and comfort. 2. Others: The scope of automotive safety technology is becoming broader and more detailed, moving towards integration, intelligence, systematization, and universal participation. Strictly controlling speed during nighttime driving is a fundamental measure to ensure safety.
5
4
Share

Is it serious to accidentally shift into R gear while driving?

For automatic transmission vehicles, accidentally shifting into R gear while driving will not cause serious situations. Automatic transmissions generally adopt intelligent designs, so even if the driver mistakenly shifts into reverse gear during operation, it will not result in gear grinding or damage to the automatic transmission. More extended information is as follows: 1. Overview: The gear positions of an automatic transmission in a car. Generally speaking, the gear positions of an automatic transmission are divided into P, R, N, D, 2, 1, or L, etc. The P gear is used for parking, utilizing a mechanical device to lock the rotating parts of the car, making the car unable to move. 2. Others: The R gear is the reverse gear, used for reversing the vehicle. The N gear is the neutral gear; when the lever is placed in the "N" gear, the power between the engine and the transmission will be cut off and separated. The D gear is the drive gear, used for driving on general roads. The 2 gear is also a drive gear, but the transmission can only switch between 1st and 2nd gears.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.