Will Applying Sun Film Affect the Registration of a New Car?

1 Answers
MacCassidy
07/30/25 7:18am
Whether a new car with film can be registered mainly depends on whether the applied sun film meets the required standards. Standards stipulate: The driver's compartment of a motor vehicle must ensure the driver's forward and side vision. The visible light transmittance of the front windshield and the glass areas outside the windshield used for the driver's viewing area must not be less than 70%. Mirror-reflective sunshade films are not allowed on any window glass. Notes: Some cars are not approved for registration after applying film because the film does not meet technical standards, either due to the sun film's transmittance failing to meet requirements, such as being particularly dark, black, or reflective.
Was this review help?
4
4
Share
More Forum Discussions

What are the effects of low tire pressure on a car?

The effects of low tire pressure on a car are: 1. Increased contact area between the tire and the ground, leading to higher tire temperature during driving; 2. Severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, increasing the risk of a blowout; 3. Increased fuel consumption and reduced tire lifespan. The effects of excessively high tire pressure are: 1. Reduced friction and adhesion of the tire, affecting braking performance and tire lifespan; 2. Decreased puncture resistance, making the tire more prone to blowouts; 3. Accelerated wear of the central tread pattern, reducing tire lifespan and increasing vehicle vibration; 4. Excessive stretching of the tire cords, reducing the elasticity of the tire body; 5. Increased susceptibility to punctures from sharp objects like nails or glass, leading to internal cracks, bursts, and blowouts.
1
5
Share

What are the methods to deal with engine abnormalities?

Engine abnormalities can be addressed by: 1. Promptly checking the condition of the car engine; 2. Inspecting the status of car sensors, air flow sensors, and spark plug components; 3. Checking for any engine knocking; 4. Examining the ignition coils for faults; 5. Performing timely repairs to restore normal operation. Causes of engine abnormalities include: 1. Faulty water temperature sensor, crankshaft sensor, or oxygen sensor; 2. Spark plug failure; 3. Ignition coil malfunction; 4. Fuel pump failure; 5. Clogged fuel lines; 6. Poor engine combustion state; 7. Blown main circuit fuse; 8. Poor quality gasoline.
11
2
Share

What is the replacement interval for the spark plugs in the Envision?

The replacement interval for the spark plugs in the Envision is 40,000 to 60,000 kilometers. The function of the spark plugs is to introduce the high-voltage pulse electricity generated by the ignition coil into the combustion chamber, using the electric spark produced by the electrodes to ignite the air-fuel mixture, completing the combustion process. Taking the 2021 Envision as an example, it is a midsize SUV with the following dimensions: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, and a fuel tank capacity of 66 liters. The 2021 Envision features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine that delivers a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
12
2
Share

What engine is used in the SWM G05?

SWM G05 uses a 2.0L naturally aspirated engine, whose function is to convert the thermal energy of gasoline into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. Taking the 2021 SWM G05 as an example, it belongs to a mid-size SUV with body dimensions of: length 4750mm, width 1860mm, height 1780mm, and a wheelbase of 2750mm. The 2021 SWM G05 has a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 2.0L naturally aspirated engine with a maximum horsepower of 143PS, a maximum power of 105kW, and a maximum torque of 190Nm, matched with a 5-speed manual transmission.
1
4
Share

What is the best oil for Ford Kuga?

Ford Kuga is recommended to use 5W20 engine oil, with a replacement capacity of 5 liters and a replacement interval of 5,000 kilometers. Taking the 2019 Ford Kuga as an example, it belongs to the compact SUV category, with body dimensions of: length 4524mm, width 1838mm, height 1685mm, a wheelbase of 2690mm, a fuel tank capacity of 60 liters, and a curb weight of 1592kg. The 2019 Ford Kuga features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 182PS, a maximum power of 134kW, and a maximum torque of 243Nm, paired with a 6-speed automatic transmission.
6
4
Share

What are the causes of slight steering wheel deviation?

The causes of slight steering wheel deviation are: 1. Deformation of the front shock absorber springs, resulting in inconsistent buffering on both sides; 2. Failure of the front shock absorber; 3. Inconsistent tire pressure; 4. Poor return of the wheel brake, incomplete separation; 5. Suspension system failure; 6. Excessive difference in wheelbase on both sides; 7. Excessive wear of vehicle chassis components leading to abnormal gaps; 8. Different tread patterns on both sides. Solutions for slight steering wheel deviation: 1. Replace the shock absorber springs; 2. Check if the shock absorber is damaged; 3. Ensure tire pressure is consistent; 4. Check if the wheelbase difference is too large; 5. Inspect the wear condition of the chassis.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.