Will Alcohol Corrode Car Paint?

1 Answers
AngelinaRose
07/29/25 10:45pm
Alcohol will not corrode car paint. Automotive paint is high-temperature baked paint with excellent scratch resistance, and generally, organic solvents available in the market have little effect on it. Although alcohol has poor dissolving power, it may still affect the paint's gloss. After wiping with alcohol, it is necessary to rinse immediately with water to prevent the paint surface from losing its luster over time. Car paint coating involves applying a protective film on the paint surface, providing a physical invisible shield to protect the paint. The main component of car paint is resin. After coating, small molecular elements such as silicon, silicon dioxide, and nano-inorganic silicon in the coating solution can fully penetrate into the gaps and micropores of the paint molecules, forming a transparent crystalline film layer on the surface, similar to a smartphone screen protector.
Was this review help?
3
0
Share
More Forum Discussions

What is the difference between 180tsi and 280tsi?

The difference between 180tsi and 280tsi lies in their torque values: the engine equipped with 180tsi has a torque of 180 Nm, while the engine equipped with 280tsi has a torque of 280 Nm. Engines can be classified in various ways: 1. According to the working method of the intake system, they can be divided into naturally aspirated, turbocharged, mechanically supercharged, and twin-charged; 2. According to the piston movement method, they can be divided into reciprocating piston internal combustion engines and rotary piston engines; 3. According to the cylinder arrangement, they can be classified as inline engines, V-type engines, W-type engines, and horizontally opposed engines; 4. Based on the number of cylinders, they can be categorized as single-cylinder engines and multi-cylinder engines.
18
1
Share

How many points are deducted for stalling once?

Stalling once will deduct 10 points. Below is relevant knowledge about stalling: Precautions to avoid stalling: When starting, do not release the clutch too quickly. The correct method is to press quickly and release slowly, allowing the clutch to gradually engage until reaching the semi-engaged state before stopping. Do not release the brake too quickly when starting, and avoid sudden braking while driving, otherwise the power cannot keep up, causing the car to stall. Reasons for stalling: Errors in the clutch release process, such as lifting the clutch too high or too quickly, may cause stalling. In addition to the points mentioned above, if the brake is not released when the clutch is halfway engaged, the engine power cannot keep up, which will also cause the vehicle to stall.
11
3
Share

How to Activate Cruise Control in a Skoda?

Skoda cruise control activation method is as follows: 1. When the vehicle is stationary or in motion, switch the cruise control from OFF to ON. At this time, a green cruise control icon will appear on the speedometer, indicating that the cruise function is activated. 2. Press the control switch to set the cruise control to standby. After accelerating to the desired speed, push the control lever downward to set the cruising speed. 3. To accelerate, push the control lever upward or press the accelerator pedal. 4. To cancel cruise control, lift the control lever upward, turn off the main cruise control switch, press the accelerator pedal, or lightly tap the brake. 5. After pressing the main cruise control switch, the cruise control icon will be displayed on the dashboard to indicate standby status.
11
0
Share

What Causes Weak Acceleration and Choking When Using Gas in a Gas-Converted Vehicle?

Weak acceleration and choking when using gas in a gas-converted vehicle may be caused by spark plug failure. Here are the relevant explanations: Spark plug failure: There are many factors that can cause vehicle hesitation or jerking, among which the most common is spark plug failure. The main component of natural gas is methane, which is less combustible compared to gasoline. Therefore, if gas-specific spark plugs are not replaced, it may lead to incomplete combustion of the gas, resulting in acceleration hesitation. Incorrect usage method: Additionally, when driving a gas-converted vehicle, it is important to pay attention to the usage method. During cold starts, the vehicle should be warmed up using gasoline first. Only when the water temperature reaches around 70 degrees should you switch to gas. This practice ensures smooth driving.
16
4
Share

Where is the trunk switch of the Roewe ei6 located?

The trunk switch of the Roewe ei6 is located below the small storage compartment on the left side of the steering wheel. Roewe is an automobile brand under the Shanghai Automotive Industry Corporation. Taking the 2019 Roewe ei6 as an example, its body dimensions are: length 4671mm, width 1835mm, height 1460mm, with a wheelbase of 2715mm, a fuel tank capacity of 38 liters, a luggage compartment capacity of 308 liters, and a curb weight of 1480kg. The 2019 Roewe ei6 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 Nm, paired with a 10-speed mechanical automatic transmission.
6
1
Share

Can I still book if my subject three ranking is over 300?

This depends on the test center's capacity and how early you obtained the "Learning to Drive Certificate," meaning how early your file was established. It's difficult to estimate whether you can secure a booking. Below is relevant information: Subject Three Booking Ranking Rules: Users who successfully book an exam but cancel due to personal reasons will have their ranking time reset to the cancellation time. If both the second and third conditions apply, the most recent time will be used as the ranking time. Booking Success Time: You can check the acceptance status of your booking in the online progress section. Results are usually available three days before the scheduled exam date. If the booking is successful, you can print the booking confirmation. Note: Applicants must bring their ID to the scheduled test center at the designated time. Failure to attend on time will result in a failed exam. If you cannot attend at the scheduled time, you must apply to cancel the booking at the vehicle management office one day in advance.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.