Will a tire burst if a piece of the tread is scraped off exposing the cords?

1 Answers
Johnny
07/29/25 7:06pm
Yes, it can lead to a tire burst. If a piece of the sidewall is scraped off or scratched, exposing the cords, the tire should no longer be used. Even if the cords are not broken, without the protection of the outer rubber, the tire's lifespan will be significantly reduced, and the risk of a blowout is very high, posing a serious hazard to driving safety. Related information: 1. Tire: A tire is a circular elastic rubber product mounted on various vehicles or machinery. Typically installed on metal rims, it supports the vehicle body, absorbs external shocks, ensures contact with the road surface, and maintains driving performance. 2. Tire composition: A tire usually consists of three parts: the outer tire, inner tube, and flap.
Was this review help?
18
4
Share
More Forum Discussions

What Causes the Feeling of Something Being Stuck When Reversing?

If there is no issue when moving forward, it is likely due to severe wear of the reverse gear in the transmission, causing poor engagement. Below is an introduction to reversing-related information: 1. Precautions: Whether you are a beginner or an experienced driver, this is a crucial point to note. Not only should you avoid pressing the accelerator while reversing, but you should also avoid half-pressing the brake, especially for beginners who should drive at a speed slower than idle. This allows more time to observe the surrounding environment. 2. Basic Principles: When parking in a parking lot, first, visually estimate the width of the parking space, check for any obstacles behind, whether there are vehicles parked on either side, and whether the length is suitable for your vehicle model. If visibility is poor at night, step out to observe the exact position before reversing.
15
0
Share

How to Switch the Manual/Automatic Transmission in the Buick GL6?

The method for switching the manual/automatic transmission in the Buick GL6 is as follows: 1. Move the gear lever to the D position to enter the manual operation mode. 2. When you need to increase or decrease the gear, gently push the gear lever forward or backward. Additional Information: The Buick GL6 is a strategic model for the Buick brand to deepen its presence in the family car market. Inheriting the dynamic and elegant design aesthetics of the Buick GL8, the GL6 emphasizes the consistent visual symbols unique to Buick MPVs, creating an elegant and spacious aesthetic design for family MPVs. The vehicle combines the sophisticated styling of sedans, the flexibility and functionality of SUVs, and the comfort of MPVs.
14
1
Share

What brand of engine is used in the GAC Trumpchi GS5?

GAC Trumpchi GS5 is equipped with a self-developed engine by GAC. The GAC Trumpchi GS5 is a mid-size SUV under the Trumpchi brand. In terms of power, this vehicle uses two engines: one is a low-power version 1.5-liter turbocharged engine, and the other is a high-power version 1.5-liter turbocharged engine. Both engines are four-cylinder and are paired with a new Aisin 6AT transmission. In terms of design, this vehicle adopts the brand-new family-style Lingyunyi 3.0 eagle-spreading wings front face design, highlighting the aesthetics of light and shadow with a tough and powerful beauty. The interior is exquisite, featuring an integrated design of the central control screen and panel, which gives a high-tech feel, and the rotary buttons have excellent texture and touch.
18
4
Share

What is the actual fuel consumption of the Haval F5?

Haval F5's fuel consumption is 6.8 liters per 100 kilometers. Here are the extended details: 1. The Haval F5 is equipped with a 1.5-liter turbocharged engine, with a maximum power output of 124 kilowatts, maximum horsepower of 169, and maximum torque of 285 Newton-meters. 2. During driving, sudden braking, rapid acceleration, and hard pressing of the accelerator are major taboos for fuel economy. 3. Pay attention to the timing of gear shifting and gear selection. The optimal shifting time is between 2500 to 3000 rpm, ensuring a balance between power supply and fuel efficiency. 4. Avoid low gear at high speeds. When driving a manual transmission, shift to a higher gear promptly after the speed stabilizes, and try to avoid using sports mode.
20
4
Share

How often should the spark plugs of Honda Jade be replaced?

Honda Jade's spark plugs should be replaced every 40,000 kilometers. Spark plugs are crucial components in a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber, causing it to jump across the electrode gap to generate sparks, thereby igniting the combustible mixture in the cylinder. They mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. The Honda Jade has a body length, width, and height of 4667mm, 1775mm, and 1530mm respectively, with a wheelbase of 2760mm. The B-pillar, C-pillar, and D-pillar of the vehicle are treated with a dark color, giving the car a floating roof visual effect. The rear lines are very dynamic, and combined with the roof spoiler and rear bumper design, the car looks more sporty.
20
0
Share

When will the 2019 Q3 be launched?

2019 Q3 will be launched in March 2019. Here is the extended information: 1. The edges of the 2019 Q3 are adorned with silver trim, enhancing the sporty feel. 2. The 2019 Q3 is the successor to the current Q3 model and represents the second generation of the Audi Q3, built on the MBQ platform. 3. The 2019 Q3 is equipped with 1.4T and 2.0T engines. In addition to these engines, the domestic version of the Q3 will later offer a model with a 1.5T turbocharged engine. 4. The all-new interior design and style of the 2019 Q3 do not follow the design of the current Q7 and the new Q5L. Instead, it draws inspiration from the digital cockpit design of the new-generation A8, significantly improving the Q3's design aesthetics and technological appeal.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.