Will a tire burst if a piece of it is scraped off?

2 Answers
OwenAnn
09/04/25 3:40am
If it's just a thin layer, there's no problem. As long as there is no bulging or cracking on the tire surface, it's not a major issue. Here are some related points: 1. Signs of tire aging: If there are countless small cracks on the tread groove bottom or tire sidewall that are about to damage the tire body, the tire needs to be replaced. It should be replaced immediately, regardless of how long it has been used or how much it has worn. 2. The remaining groove depth of the tire tread reaches or falls below 1.6 millimeters: There are indicator marks in the longitudinal straight grooves of the tire tread showing this depth. The tire must be replaced because its drainage capacity has significantly decreased, making driving on wet surfaces more dangerous.
Was this review help?
16
5
Share
MadelynDella
09/16/25 4:48am
Last time at a highway service station, I met a driver who said he scraped off a small piece of rubber while reversing, and the next day his tire blew out on a long trip. The outer rubber layer of a tire is like protective clothing—once damaged, it can harm the inner cord layers, especially on the sidewalls, which are the most vulnerable. If the cord layers are compromised, the internal pressure during high-speed driving can tear the wound open, leading to a blowout in minutes. My advice is to pull over immediately and inspect the damage. If you can see white cords or the wound is larger than a fingernail, call a tow truck right away. When parking, keep your tires clear of curbs to avoid scraping them against the edges, as that’s where they’re most likely to get damaged. Spending a few hundred on a new tire is far better than being stranded on the road.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What are the reasons for the power steering fault indicator light to illuminate?

The reasons for the power steering fault indicator light to illuminate are: 1. There is a large amount of air in the power steering system; 2. Foreign objects in the steering hydraulic line causing the steering pump flow control valve to stick; 3. Loose connections in the power steering system leading to steering fluid leakage; 4. Excessive wear of the steering gear piston cylinder, poor sealing of the oil seal, or control valve sticking or damage. The classifications of power steering systems include mechanical hydraulic power steering, electro-hydraulic power steering, and electric power steering. The principle of mechanical hydraulic power steering is to convert a portion of the engine's power output into hydraulic pump pressure, applying auxiliary force to the steering system to turn the tires.
5
2
Share

What is the correct way to press the brake pedal?

The correct way to press the brake pedal is: 1. In case of abnormal brake pedal, use engine braking and shift to a lower gear; 2. In heavy traffic, press the brake pedal gently; 3. On rainy or muddy roads, press the brake pedal lightly and continuously; 4. In emergency situations, press the brake pedal hard immediately and then release it slowly, followed by continuous gentle pressing and releasing of the brake pedal. The reasons for brake pedal vibration are: 1. Uneven brake disc surface with excessive radial runout; 2. Large deviation in wheel alignment data, incorrect front wheel alignment angle, or excessive toe-in; 3. Tire pressure too high or too low; 4. Abnormal tire wear or deformation of the tire rim.
14
4
Share

What Does Vehicle Breakdown Mean?

Vehicle breakdown refers to a situation where a vehicle suddenly experiences a malfunction while driving, rendering it unable to continue moving. The solutions for a vehicle breakdown are as follows: Turn on the hazard warning lights: This alerts vehicles behind and other road users, allowing them to slow down or avoid the area, thereby enabling the disabled vehicle to be parked in a safe location. Set up a triangular warning sign: Place a triangular warning sign approximately 150 meters behind the vehicle. This informs approaching drivers that there is a disabled vehicle ahead. Call for assistance: After all occupants have moved to a safe area, call for roadside assistance or towing services.
18
4
Share

What is the fuel tank capacity of the Ford F-650?

The fuel tank capacity of the Ford F-650 is 600 liters. The size of the fuel tank capacity measures a vehicle's ability to carry fuel, and it determines the driving range. The fuel tank is a container used in vehicles such as cars or aircraft to store fuel, and it is a specialized container in hydraulic systems for storing hydraulic oil. The fuel tank can store gasoline, dissipate heat, and separate air bubbles from the oil. It can be classified into open-type and closed-type fuel tanks. The Ford F-650 is an American heavy-duty pickup truck model featuring a four-door design. It is equipped with a 6.7L V8 Cummins diesel engine, delivering a maximum power of 239 kW and a maximum torque of 800 Nm.
7
4
Share

How Many Years Can a New Energy Vehicle Battery Last?

New energy vehicle batteries can last three to five years. New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving systems to form vehicles with advanced technical principles, new technologies, and novel structures. Reasons for the low range of new energy vehicles: 1. Increased viscosity of the electrolyte in low-temperature environments, leading to a decrease in the conductivity of lithium-ion batteries; 2. Poor compatibility between the electrolyte and the negative electrode and separator in low-temperature environments; 3. Severe lithium precipitation on the negative electrode of lithium-ion batteries in low-temperature environments; 4. Reduced diffusion system within the active material of lithium-ion batteries in low-temperature environments.
14
1
Share

What engine does the McLaren P1 use?

McLaren P1 uses a 3.8T twin-turbocharged engine. The function of the engine is: to convert the heat energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to do work. Taking the 2014 McLaren P1 as an example, its body dimensions are: length 4588mm, width 2144mm, height 1188mm, with a wheelbase of 2670mm. The 2014 McLaren P1 is equipped with a 3.8T twin-turbocharged engine, delivering a maximum horsepower of 737ps, a maximum power of 542kw, and a maximum torque of 720nm.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.