Will a Slightly Flood-Damaged Vehicle Be Greatly Affected?

1 Answers
Anne
07/29/25 8:12pm
Slight water damage can also cause significant harm, as the vehicle's electrical circuits can be severely affected after being submerged. Here are some methods to identify a flood-damaged car: 1. Smell the interior: Check for a musty odor inside the car. Flood-damaged vehicles often have a musty smell in hidden areas such as under the floor mats, trunk liners, and beneath the seats. These odors are difficult to remove and usually leave evidence. Be cautious if you detect a musty smell, and also be wary if the car smells overly fragrant, as this may be an attempt to mask the odor. 2. Inspect hidden areas: Examine screws in concealed parts of the vehicle for rust or signs of replacement. Pull back the seats to check the tracks for rust or sand. Extend the seatbelt fully to see if there are water stains or dirt at the end.
Was this review help?
17
5
Share
More Forum Discussions

When will the Avancier 2.0T meet China 6 emission standards?

The China 6 compliant Honda Avancier 2.0T model was already launched in 2020 with a starting price of over 270,000 RMB. Details about the Avancier 2.0T China 6 model are as follows: 1. The vehicle dimensions are: length 4858mm, width 1942mm, height 1675mm, with a wheelbase of 2820mm. 2. Exterior-wise, it only received minor updates. 3. The interior design shows little change compared to the previous model. 4. In terms of power, the engine delivers a maximum horsepower of 272hp and peak torque of 370Nm. 5. For the chassis, it comes equipped with a real-time four-wheel drive system.
10
2
Share

Where is the license plate with 'Ji' prefix from?

Ji is the license plate prefix for Shijiazhuang City, Hebei Province. Ji is the abbreviation for Hebei Province, so all vehicle license plates in Hebei Province start with the character 'Ji', with license plate codes ranging from Ji A to Ji T. Here is some information about license plates: 1. Function: License plates serve as identification and information registration for vehicles. Their primary purpose is to indicate the region to which the vehicle belongs, and they can also be used to look up the vehicle's owner and registration details. 2. Meaning: License plates, commonly referred to as vehicle plates or number plates, are plates attached to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information.
10
0
Share

When should the second car maintenance be performed?

The second car maintenance should be performed when the mileage reaches 10,000 kilometers. After undergoing such extensive inspections and maintenance during the second service, the overall condition of the car will significantly improve, ensuring driving safety. After the second maintenance, the performance of the new car will be basically stable. Subsequently, depending on the car's condition and usage habits, a minor service should be done every 5,000 to 7,500 kilometers, and a comprehensive check-up maintenance every 10,000 to 15,000 kilometers. Car maintenance, also known as car servicing, refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car.
14
1
Share

What is the ground clearance of the new generation Magotan?

The minimum ground clearance of the new generation Magotan is 114mm. Below is the relevant introduction about Magotan: 1. In terms of appearance, the design of Magotan is very successful. The front face features a horizontal grille that is concise, capable, and atmospheric, while also exuding a sense of refinement. The front grille is connected to the headlights, extending its horizontal visual tension and making the body appear wider. The side profile of the car is harmonious, well-proportioned, and robust, with an excellent sense of proportion. The rear end is full and sexy, overall very much in line with Volkswagen's aesthetic requirements. 2. In terms of chassis, the suspension structure consists of front MacPherson independent suspension and rear multi-link independent suspension, with a tuning style that is comfortable yet resilient. It handles road bumps very well while also providing solid support, resulting in an overall excellent sense of quality.
6
1
Share

How Does a Car Braking System Work?

Car braking system working principle: It utilizes the mutual friction between the non-rotating components connected to the vehicle body (or frame) and the rotating components connected to the wheels (or drive shaft) to prevent the rotation of the wheels or the tendency to rotate. The kinetic energy of the moving car is converted into frictional heat energy and dissipated into the atmosphere. Here is more information about the braking system: 1. When the braking system is not engaged: There is a gap between the brake shoe and drum, allowing the wheels and brake drum to rotate freely. 2. During braking: To decelerate the car, the brake pedal is pressed, which activates the push rod and master cylinder, causing the master cylinder fluid to flow into the wheel cylinders under pressure. The wheel cylinder pistons then push the brake shoes to pivot around their support pins, causing the upper ends to separate and press their friction linings against the inner surface of the brake drum. The stationary brake shoes create a frictional torque on the rotating brake drum, thereby generating braking force. 3. Releasing the brake: When the brake pedal is released, the return mechanism pulls the brake shoes back to their original position, and the braking force disappears.
2
1
Share

Do Newly Replaced Tires Require Dynamic Balancing?

Newly replaced tires require dynamic balancing because prolonged use can lead to the detachment of balancing weights, causing an imbalance in the tire's weight distribution. A car's wheel is an assembly of the tire and the rim. However, due to manufacturing imperfections, the mass distribution across the wheel may not be entirely uniform. When the wheel rotates at high speeds, this can result in dynamic imbalance, leading to wheel wobble and steering wheel vibrations during driving. To prevent or correct this issue, weights are added to the wheel while it's in motion to adjust the balance across its edges. This adjustment process is commonly referred to as dynamic balancing.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.