Will a novice be penalized for stalling at a traffic light and not moving?

2 Answers
AlessandraAnn
07/25/25 10:08am
Failure to proceed when the light turns green will result in penalties and fines. According to regulations: a red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Driving against traffic signal instructions will incur a fine and a deduction of 3 points. When encountering traffic congestion at an intersection ahead, motor vehicles must wait in line outside the intersection and must not enter it. Below are common traffic violations: 1. Running a red light: This is the most common violation. Since the new traffic regulations were implemented, running a red light results in an immediate deduction of 6 points. 2. Driving without a license: If a driver continues to drive while their license is suspended, they will face a fine and 15 days of detention. Driving without a license or with a revoked license will result in 15 days of detention and a fine. 3. Overloading or overcrowding: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. Exceeding these thresholds will result in higher fines. 4. Drunk driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence will also result in a 3-month suspension and a fine. 5. Speeding: Exceeding the speed limit by more than 50% will result in a fine and revocation of the driver's license.
Was this review help?
3
4
Share
DelAndrew
08/11/25 7:35pm
I've been driving a manual transmission car for almost 15 years. I remember stalling several times at traffic lights when I first learned to drive—my heart nearly jumped out of my chest. But actually, stalling and not moving won’t directly result in penalty points. However, if you stall and stay stationary for too long, blocking the intersection, traffic police might come over to give you a warning or fine you 100-200 yuan for obstructing traffic order, though minor incidents like this usually don’t affect your license points. For beginners, I recommend practicing starting techniques more: slow down when approaching traffic lights, coordinate the clutch and throttle smoothly, and if you stall, restart the engine immediately without hesitation. Automatic transmission cars are simpler in this regard. With many surveillance cameras on city roads, staying still for over a minute might get you photographed and fined. Safety comes first—don’t let nervousness cause a rear-end collision. Practice in open areas when possible, and with time, it’ll become second nature. Driving is all about practice making perfect, so don’t let small issues turn into big troubles.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

How Many Degrees to Turn the Steering Wheel for a U-Turn in Subject Three?

For a U-turn in Subject Three, the steering wheel is typically turned more than 90 degrees and then adjusted to half a turn. Below is an introduction to the relevant aspects of Subject Three in the driving test: 1. Introduction: Subject Three includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Specific Test Content of Subject Three: The road driving skills test generally includes: preparation before getting on the car, simulated light test, starting, driving straight, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.
9
2
Share

Does a new car need an inspection in the second year?

Yes, a new car requires an inspection in the second year. The consequences of overdue vehicle inspection are as follows: 1. No compensation for accidents involving overdue inspection: Insurance policies explicitly state that un-inspected vehicles will be denied claims. If an accident occurs involving a vehicle that has not undergone the required inspection or fails the inspection, or if the vehicle lacks a valid driving license, the insurer will not be liable for compensation. This means the insurance policy only applies to qualified and legal vehicles. In addition to refusing compensation for accidents involving vehicles with overdue inspections, insurance companies will also deny claims for lost vehicles. 2. Vehicles not inspected for three consecutive cycles will be forcibly scrapped: According to Article 4 of the 'Compulsory Scrapping Standards for Motor Vehicles,' vehicles that fail to obtain an inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection period will be forcibly scrapped. Specifically, for private cars, inspections are required every two years for the first six years, annually from the 7th to the 15th year, and every six months after 15 years. If a vehicle fails to obtain an inspection qualification mark for three consecutive inspection cycles, it will be forcibly scrapped.
8
4
Share

Can a tire still be used after being patched 5 times?

A tire that has been patched 5 times can still be used as long as the patches hold air. Below is relevant information about automotive tires: 1. Overview: Automotive tires are one of the most important components of a vehicle. They directly contact the road surface and work together with the vehicle's suspension to absorb shocks during driving, ensuring good ride comfort and smooth operation. They also maintain good traction between the wheels and the road, improve the vehicle's traction, braking, and off-road capability, and bear the vehicle's weight. The critical role tires play in vehicle performance is increasingly recognized. 2. Usage tips: (1) Avoid abrupt starts; whether the vehicle is loaded or unloaded, always start smoothly at low speed to prevent tire drag on the ground and reduce tread wear. (2) On good road surfaces, maintain straight-line driving. Except for meeting other vehicles or avoiding obstacles, avoid swerving or making sharp turns to prevent lateral cutting damage between the tire and rim. (3) When descending long slopes, control your speed appropriately based on the slope's gradient, length, and road conditions. On long, steep, or complex slopes, use gear driving and apply light braking to control downhill speed. This not only avoids emergency braking and reduces tire wear but also enhances driving safety.
17
0
Share

How to Reset the Maintenance Light on a Toyota Highlander?

Toyota Highlander maintenance light reset method: 1. With the engine off, press and hold the short-distance trip meter reset button located below the tachometer. 2. Turn the ignition to the ON position, then release the short-distance trip meter reset button. The display will show the SERVICE indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to complete the reset of the reminder message. Additional information: 1. The Highlander will illuminate the maintenance light as a reminder when service is due. After an oil change, the oil light and maintenance data need to be reset. For some vehicles where manual reset isn't possible, a diagnostic tool may be required for resetting. 2. When the maintenance light comes on in a Toyota Highlander, it's advisable to visit an authorized Toyota service center promptly. Technicians will reset the light after servicing. While DIY maintenance is possible, remember to reset the maintenance light to prevent timing errors. 3. Regular maintenance is crucial. Oil changes are the most common service item. Prolonged oil use leads to degradation, reducing lubrication effectiveness, accelerating engine component wear, and significantly diminishing cooling performance. In severe cases, this can lead to engine seizure.
10
1
Share

What does it mean to drive without following the examiner's instructions?

Driving without following the examiner's instructions means not obeying the examiner's commands. Below are the exam precautions: 1. Before getting into the vehicle: Check if all four doors of the exam vehicle are closed. If any door is not closed, the exam result will be marked as failed. 2. After getting into the vehicle: Observe the vehicle's dashboard to see if the vehicle is turned off or idling. If the tachometer shows zero, start the vehicle, but ensure the gear is in neutral before starting. 3. Adjust the seat and mirrors, and fasten the seatbelt: Test if the handbrake can be released. If not, promptly contact the exam site staff. After completing these preparations, raise your hand to signal. The remote examiner will then send the instruction "Please scan your fingerprint." Use the same finger that was registered in the waiting room for verification. Upon successful verification, a voice prompt will say, "Verifying examinee information, please begin the exam." Only after hearing this instruction should you start driving into the exam items. Driving into the exam items without hearing the "please begin the exam" instruction will be automatically judged as failing to follow the examiner's instructions, resulting in disqualification.
16
2
Share

Why is the validity period of the 6-year exemption from inspection only 2 years?

The reason why the 6-year exemption from inspection has a validity period of only 2 years is due to the unified management of small vehicles. The following is relevant information about the annual inspection: 1. Conditions: Vehicles whose condition does not match the records on the driving license or file, vehicles with damaged, incomplete, or illegible license plates or driving licenses, or those with self-made license plates. 2. Precautions: The exterior of the vehicle must not be modified. The color of the glass sunshade or anti-explosion film should not be too dark (items inside the vehicle should be clearly visible from one meter away; mainly applies to vans and trucks, but not to small cars with 5 seats or fewer). Vans and trucks must have enlarged rear license plate numbers. The number of spring leaf plates must not be increased or decreased. The number of seats in a van must not be increased or decreased, and a fire extinguisher must be present. The compartments of box trucks must not be modified (no side doors, no roof openings, no tailgates). The size of the tires must not be altered, and the tread patterns of tires on the same axle must be consistent. Vehicles with unresolved traffic violations or those impounded by the court cannot undergo the annual inspection.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.