Will a Lighter Explosion in the Car Cause a Fire?

1 Answers
JadeRose
07/29/25 5:37pm
There is a high possibility. If a lighter explodes and the car owner is not nearby, it can easily lead to open flames, causing flammable items in the car to catch fire and result in spontaneous combustion. The main component of lighters is liquid butane, and high concentrations of butane can explode at room temperatures of 20 degrees Celsius. If the lighter explodes due to exposure to intense sunlight, it is considered human-caused damage to the vehicle, and insurance companies may not cover the cost. Below are some tips to prevent car fires in summer: 1. Avoid placing flammable items: Do not place disposable lighters or pressurized cans of hairspray, air fresheners, or insecticides on the dashboard, as they can easily explode when heated. Also, avoid discarding cigarette butts on the carpet. 2. Be alert to unusual odors: If you smell burning rubber or see smoke coming from the edges of the hood or near the dashboard while driving, pull over immediately, turn off the engine, and disconnect the main power switch. 3. Carry an effective fire extinguisher: Keep a fire extinguisher in the car and check its expiration date. In case of a fire while driving, call emergency services immediately and use the extinguisher for initial firefighting. 4. Perform regular checks: Conduct routine inspections and maintenance to prevent electrical circuit aging, which can lead to car fires. 5. Avoid unauthorized modifications: If modifications are necessary, have them done by professional technicians. 6. Park in shaded areas: When parking, try to avoid direct sunlight and check the car’s undercarriage to ensure there are no flammable materials underneath.
Was this review help?
14
1
Share
More Forum Discussions

What are the reasons for insufficient power and black smoke from a diesel engine?

There are several reasons why a diesel engine emits black smoke and lacks power: 1. Insufficient fuel supply: A low amount of fuel in the cylinder results in reduced heat generation during combustion, which cannot meet the engine's load requirements, leading to engine weakness and incomplete combustion, causing black smoke. 2. Poor spray quality: When the diesel engine is operating, if the fuel injector's spray quality is poor, the surface area of the fuel sprayed into the cylinder is reduced, decreasing the oxygen combination rate and resulting in less heat generation. 3. Insufficient air intake: A lack of air intake in the engine reduces the engine's air charge, preventing carbon atoms in the fuel from fully reacting with oxygen atoms. This results in reduced heat release, engine weakness, and incomplete combustion, leading to black smoke. 4. Impact of ambient temperature: Excessively high temperatures can cause the engine to overheat, affecting the engine's air charge and reducing power. Excessively low temperatures can lead to poor fuel evaporation in the cylinder, causing incomplete combustion, reduced heat generation, and engine weakness.
3
2
Share

How to Distinguish Between National 5 and National 6 Emission Standards for Vehicles?

The difference between National 5 and National 6 vehicles mainly lies in the reduction level of harmful substances in exhaust emissions. The methods to distinguish between National 5 and National 6 vehicles are as follows: 1. Emission Label: The label for National 5 emission standard is V, while the label for National 6 emission standard is Ⅵ. 2. Vehicle Certificate: The vehicle certificate will indicate the emission standard of the vehicle. 3. Environmental Information List: The environmental information list accompanying the vehicle specifies the exhaust emission standard of the car. Information about National 5 and National 6 standards is as follows: 1. National 5: The National Fifth Stage Motor Vehicle Pollutant Emission Standard, known as "National 5 Standard," has an emission control level equivalent to the European Stage 5 emission standard currently in effect. 2. National 6: The National Sixth Stage Motor Vehicle Pollutant Emission Standard is formulated to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from exhaust emissions of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and ensure human health.
14
2
Share

Do I still need to engage the handbrake after pressing the P gear in a Mercedes-Benz?

Whether you need to engage the handbrake after pressing the P gear in a Mercedes-Benz depends on the specific situation. 1. If the vehicle is turned off after pressing the P gear, the car will automatically engage the handbrake, so you don't need to press it again. However, pressing it once more won't cause any issues. 2. If you are parking for an extended period, you must engage the electronic handbrake. Otherwise, the locking mechanism of the P gear may be subjected to excessive force. Prolonged use of the P gear without the electronic handbrake can reduce the lifespan of the P gear's locking mechanism and may even damage the transmission. Related information: 1. The gear lever in a Mercedes-Benz is located on the right side of the steering wheel, which is traditionally the position for the windshield wiper lever in conventional models. 2. The design of the gear lever allows the driver to operate it without leaving the steering wheel, making it very convenient and improving the efficiency of switching driving modes. Additionally, it saves a significant amount of space inside the car. Mercedes-Benz models featuring this gear lever design include the S-Class, E-Class, and C-Class, among others.
7
1
Share

What is the fuel tank capacity of the Mercedes-Benz Vito?

The fuel tank capacity of the Mercedes-Benz Vito is 70 liters, as officially announced. Owners who have purchased the Mercedes-Benz Vito can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Mercedes-Benz Vito is 95, with a fuel consumption of 8.7L per 100 kilometers. A full tank of fuel can cover a distance of approximately 805km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
3
1
Share

How many years is the validity period of a driver's license test permit?

The validity period of a driver's license test permit is three years. The following is a detailed introduction about the driver's license: The full name of the driver's license is the motor vehicle driver's license, also known as the 'driver's license'. It is a certificate that must be applied for by motor vehicle drivers in accordance with the laws of the People's Republic of China. Exam content: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). To obtain a driver's license, one must meet the minimum age requirement and pass the driving test.
9
0
Share

How to Replace the Key Battery for the New Mercedes-Benz B150?

From the tail of the key, push upwards on the marked switch, and the hidden mechanical key will pop out slightly, allowing you to remove the mechanical key. Use the just-removed mechanical key to press against the marked position, and with a gentle force, the key casing can be opened. After opening the key casing, you can see that the battery is positioned quite deep. Simply insert an object along the side gaps and gently pry to remove the old battery. When installing the new battery, ensure that the positive and negative poles are not reversed.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.