Will a broken car light cover affect the car when it rains?

2 Answers
MacCaden
07/29/25 1:45am
A broken car light cover can affect the vehicle when it rains. A damaged headlight may cause the light to scatter, increasing the likelihood of traffic accidents. Damaged headlights: It can easily lead to water ingress, which not only affects the brightness of the headlights but may also cause a short circuit, damaging the electrical system. Car headlights are not only related to the owner's external image but also closely tied to safe driving at night or in bad weather conditions. Lifespan of car headlights: The regenerative cycle process makes halogen lamps last about four times longer than the incandescent bulbs in our homes. Generally, the lifespan of halogen lamps ranges from 300 to 500 hours.
Was this review help?
18
4
Share
DeSamuel
08/12/25 5:49am
A broken lamp cover definitely has an impact, and I've suffered from it. Once the cover of my car's headlight cracked, rainwater seeped into the lamp chamber through the gap during rain, causing heavy fogging inside. I could barely see the road at night and almost had an accident. Rainwater conducts electricity and could short-circuit the bulb or damage the wiring, leading to time-consuming and costly repairs. A friend of mine had a similar issue, and later the interior of the lamp corroded, requiring a complete replacement that cost him hundreds more. I recommend sealing any cracks immediately with transparent tape and heading to a repair shop to replace the cover as soon as possible. During regular car washes or inspections, pay attention to the integrity of the lamp housing—don't wait until rainy days when the problem worsens. Many car lights are designed to be sealed nowadays, but once broken, that layer of protection is compromised, posing significant safety risks, especially during nighttime driving.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What to Do If the Handbrake Button Cap Falls Off?

Repair it as soon as possible, as the handbrake is crucial. Functions of the car handbrake: 1. The handbrake is used to keep the car stationary when pulled up during parking, preventing the car from rolling downhill. 3. In emergencies, the handbrake can serve as a brake. Usage of the handbrake when starting and stopping the car: 1. Starting: Press the clutch, shift to 1st gear, release the handbrake, then release the clutch and press the accelerator to start. 2. Stopping: Press the brake, stop the car, shift to neutral, and pull the handbrake tight. Correct usage of the handbrake: 1. When stuck in traffic on a slope, remember to pull the handbrake. 2. When driving at high speed, the handbrake cannot replace the foot brake. 3. Driving with the handbrake on causes significant brake wear.
1
3
Share

What are the standards for motor vehicle exhaust emissions testing?

Automobile exhaust emission standards are divided into gasoline vehicle testing standards and diesel vehicle testing standards. The following is a detailed introduction to automobile exhaust emissions: 1. The Euro I, Euro II, Euro III, and Euro IV standard values for gasoline vehicle HC emissions testing are 1.1%, 1.1%, 0.66%, and 0.46%, respectively; the Euro I, Euro II, Euro III, and Euro IV standard values for gasoline vehicle CO emissions testing are 4.5%, 4%, 2.1%, and 1.5%, respectively; 2. The Euro I, Euro II, Euro III, and Euro IV standard values for gasoline vehicle NOx emissions testing are 8%, 7%, 5%, and 3.5%, respectively; the Euro I, Euro II, Euro III, and Euro IV standard values for gasoline vehicle PM emissions testing are 0.36%, 0.15%, 0.1%, and 0.02%, respectively; 3. The Euro I, Euro II, Euro III, and Euro IV standard values for diesel vehicle HC+Nox emissions testing are 1.36%, 0.9%, 0.56%, and 0.3%, respectively; the Euro I, Euro II, Euro III, and Euro IV standard values for diesel vehicle CO emissions testing are 2.72%, 1.0%, 0.64%, and 0.5%, respectively; 4. The Euro I, Euro II, Euro III, and Euro IV standard values for diesel vehicle PM emissions testing are 0.196%, 0.1%, 0.05%, and 0.025%, respectively.
10
1
Share

How to Replace the Battery in a Mercedes GLC Key?

Mercedes GLC key battery replacement method is as follows: 1. Purchase the original battery for the car key, ensuring the voltage and model are the same; 2. Remove the mechanical key, usually by pressing a small button to pull it out; 3. Use a small flat-head screwdriver to pry open the car key. There is a small gap in the middle of the key, and gently rotating it will open it; 4. Pry out the old battery, install the new one, and then reassemble the car key. Below are the reasons why a car key may fail: 1. Car key issues: During daily use, the car key may run out of battery. Pay attention to the usage method when driving, keeping the locking and unlocking distances shorter, as longer distances consume more power. Avoid pressing the remote key multiple times when locking the car; 2. Car issues: When the car battery is low on power, the car key may also become unresponsive. It's important to monitor the car battery's charge during use to avoid running out of power while driving, which can affect normal usage; 3. Environmental issues: When parking, if the car is parked in an area with strong magnetic fields or if there are thieves attempting to steal important items from the car, interference devices may be used around the parking area, causing issues with locking or unlocking the car door. In such cases, it is recommended that the owner handle the situation appropriately.
4
4
Share

Why is the motorcycle emitting black smoke with insufficient power?

Reasons for a motorcycle emitting black smoke with insufficient power: The mixture is too rich due to various reasons, such as a clogged air filter, an overly rich carburetor mixture ratio, improper use of the choke, excessively high fuel level, incorrect needle position, oversized main jet, issues with the main jet and emulsion tube, or poor carburetor quality. Below are the solutions for a motorcycle emitting black smoke with insufficient power: 1. Replace with a slightly smaller idle jet. 2. Adjust the float height and observe the fuel level in the float chamber—it should be at 2/5 of the chamber for a normal level (Note: When observing the fuel level by removing the lower cover, ensure the carburetor is upright to prevent fuel spillage, which could lead to inaccurate fuel level judgment). 3. There are three types of enrichment valves: manual plunger-type enrichment valve, vacuum diaphragm plunger-type enrichment valve, and electric heating plunger-type enrichment valve. The manual plunger-type enrichment valve is relatively simple to repair—cleaning the plunger, replacing the spring, or adjusting the cable can resolve reset issues. For the vacuum diaphragm plunger-type enrichment valve, mainly check if the vacuum tube or diaphragm is cracked or leaking. The electric heating plunger-type enrichment valve usually has issues with damaged heating elements or faulty power supply circuits; damaged heating elements must be replaced.
8
0
Share

How should motor vehicles be driven when approaching an intersection ahead?

Methods for driving a motor vehicle through an intersection ahead: 1. When driving straight through an intersection ahead, regardless of whether there are traffic signals, gradually reduce speed while keeping eyes on the road ahead. Since the vehicle is going straight, it should stay in the straight lane. 2. As the vehicle approaches the intersection, the driver should watch the traffic light while keeping an eye on the road ahead. If the light is green, the vehicle can follow other vehicles and proceed straight through the intersection. 3. If the light is red, the driver should also pay attention to the stop sign on the road and stop the vehicle before the stop line. If the light is yellow, the driver can decide whether to proceed through the intersection based on the situation. 4. When the traffic light at the intersection turns yellow, if there are no pedestrians or other vehicles crossing, the driver may proceed. If there are pedestrians or other vehicles crossing, the driver should yield and wait until the light turns green again before proceeding. 5. When passing through the intersection, the driver must control the speed properly, shift to 1st or 2nd gear, and maintain an appropriate distance from the vehicle ahead. This ensures timely stopping if the vehicle ahead behaves abnormally, avoiding rear-end collisions. 6. When driving straight through an intersection without traffic lights, the driver must carefully observe the movements of pedestrians or cyclists and proceed only when it is safe to do so, preventing traffic accidents. Special attention should be paid to controlling speed when crossing pedestrian crossings.
20
2
Share

Do You Need to Press the AC Button When Using the Car Heater in Winter?

Normally, you do not need to press the AC button when using the car heater in winter. AC stands for Air-conditioning, which means air conditioning adjustment. In summer, pressing the AC button turns on the compressor, which blows cold air through air compression. However, in winter, the car needs warm air to continuously raise the interior temperature to a level comfortable for the human body. The warm air is provided by the engine, which generates a significant amount of heat while running. At this time, you only need to channel this heat into the air conditioning system, and warm air will blow out from the vents. Therefore, there is no need to press the AC button. Using the heater in winter does not increase fuel consumption. This is because the warm air blown by the heater comes from the heat generated by the engine. Even if you don't use the heater, this heat would otherwise be expelled outside the car. In a way, using the heater in winter actually reduces the burden on other car components, such as the engine's cooling system. However, it is important to note that you should not run the heater for extended periods in winter. While the engine generates heat, it also produces harmful gases that can enter the car through the air conditioning system. Therefore, when using the heater in winter, it's advisable to open the windows periodically to ventilate the car and minimize potential harm to the body.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.