Why Won't the Wuling Sunshine Wiper Move?

1 Answers
DelBrooke
07/29/25 8:05pm
Wuling Sunshine wiper may not move due to residue on the wiper, which can be cleaned before trying again. Here is some relevant knowledge about wipers: Wiper Operation Principle: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque. Its output shaft drives the four-bar linkage, which converts continuous rotational motion into left-right swinging motion. Wiper Function: It is a tool on the front glass of motor vehicles used for simple cleaning to prevent rainwater and other debris from obstructing the view.
Was this review help?
12
3
Share
More Forum Discussions

What are the differences between hardtops and soft tops?

The differences between hardtops and soft tops are: 1. Overall weight: Hardtops are heavier than soft tops. Compared to hardtops, soft tops can be folded more compactly, thus reducing space occupation. Soft tops are usually made of fabric, which saves a lot of weight compared to metal roofs. Additionally, the rear window of a soft top is typically made of plastic, which is much lighter than the glass in a hardtop. 2. Selling price: Soft tops are cheaper than hardtops. The mechanical structure and electrical components of soft tops are fewer than those of hardtops, making them more affordable. For soft top models, the biggest concern is lifespan. Over years of sun exposure, the plastic rear window becomes more fragile, and older soft tops are more prone to tearing at high speeds. 3. Safety: Hardtops offer better safety than soft tops. The rear window of a hardtop convertible is made of glass, which provides superior anti-theft performance and better resistance to damage from sharp tools compared to the plastic window of a soft top.
4
4
Share

What do the letters PRND on an automatic transmission represent?

In automatic transmission vehicles, the P stands for Park, R stands for Reverse, D stands for Drive, N stands for Neutral, and L stands for Low gear. Below are some important notes on gear usage: 1. Check the gear position before starting: Since automatic transmissions are equipped with a neutral start switch, the engine can only be started when the gear shift lever is in P or N position. This prevents the car from lurching forward if started accidentally in other gears. Therefore, always ensure the gear shift lever is in P or N before starting the engine. 2. Avoid coasting in neutral at high speeds: Some drivers shift to N (Neutral) when driving at high speeds or going downhill to save fuel, but this can potentially damage the transmission. When the transmission output shaft rotates at high speed while the engine idles, the transmission oil pump may not supply sufficient oil, leading to poor lubrication. This can cause the driven plates to rotate at high speeds under the wheels' influence, potentially resulting in resonance, slippage, and other adverse effects.
19
5
Share

What Causes Misalignment in Car Display Touchscreens?

Reasons for misalignment in car display touchscreens: 1. Possible touchscreen damage: Take it to a 4S shop for professional repair. 2. Possible malfunction: Try resetting it. The reset button is usually located on the screen or main unit, appearing as a small round hole or a tiny button. You can use a paperclip or toothpick to press the DVD's RST hole (reset button) to restore the device to its initial state. Additional information: The car navigation system, also known as the onboard GPS navigation system, receives data from at least 3 of the 24 GPS satellites orbiting the Earth through its built-in GPS antenna. By combining this with the electronic map stored in the onboard navigation device, it matches the position coordinates determined by GPS satellite signals to pinpoint the car's exact location on the electronic map, commonly referred to as the positioning function.
6
1
Share

Is consuming one liter of engine oil per 1,000 kilometers considered severe?

Consuming one liter of engine oil per 1,000 kilometers is considered severe and exceeds the normal consumption range. Typically, engine oil consumption ranges between 0.4 to 0.7 liters per 1,000 kilometers. Below are the reasons for excessive engine oil consumption: Piston damage: Damaged pistons or piston rings can lead to oil burning, preventing fuel from fully combusting and generating power. Aggressive driving habits: New drivers often press the accelerator pedal too hard without lifting it, neglecting to vary their speed, which inadvertently increases engine oil consumption. Aging engine components: An aging engine or a malfunctioning computerized oil control system can result in severe oil consumption. Damaged oil pipes: Cracks or leaks in the fuel tank or oil pipelines can cause oil loss. Faulty oxygen sensor: A damaged oxygen sensor or a partially blocked catalytic converter can also lead to increased oil consumption.
10
4
Share

What are the details of the new regulations for vehicle license annual inspection in 2021?

The details of the new regulations for vehicle license in 2021 include two major aspects, namely the addition of three major items and the elimination of five items. The specific contents are as follows: Addition of three major items: Addition of tread depth inspection: This inspection is conducted using a tire tread depth gauge. If the tire is severely worn and the depth does not meet the standard, the vehicle will not pass the annual inspection. Addition of wheelbase inspection: The wheelbase test has been added to eliminate private modifications by vehicle owners. Addition of vehicle lifting device: Vehicle lifting devices, commonly seen in 4S shops or repair shops, have been added. This device allows for a clearer observation of the vehicle's chassis condition. Elimination of five items: Elimination of electronic parking brake inspection; Elimination of headlight deviation inspection; Elimination of speed inspection; Elimination of speedometer error inspection; Elimination of vehicle noise inspection and suspension test.
15
4
Share

What are the differences between oil-cooled and air-cooled motorcycles?

Motorcycles have three cooling methods: oil-cooled, air-cooled, and water-cooled. Oil-cooling is essentially an enhancement of air-cooling by adding an oil radiator, which increases the cooling surface area by utilizing the flow of oil through the heat exchanger to achieve cooling. Oil-cooled engines: In addition to the radiator, oil-cooled engines can also dissipate heat through cooling fins. Therefore, they can also be referred to as air-oil-cooled engines. Compared to purely air-cooled engines, air-oil-cooled engines offer significantly better cooling performance and lower failure rates. Air-cooled: As the name suggests, air-cooling relies on the flow of air to carry away the heat from the engine. The cylinder head of an air-cooled engine is typically equipped with numerous cooling fins and ventilation ducts.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.