Why Won't the Scooter Start?

How to use the cruise control in Magotan?

The method to use cruise control in Magotan is: while driving, push the cruise control lever located on the left rear side of the steering wheel to the 'on' position. Once the vehicle reaches the desired speed, press the 'set' button on the lever. The Magotan is a mid-sized 4-door 5-seater sedan with body dimensions of: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, and a fuel tank capacity of 66 liters. It is equipped with a 1.4L turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110kW at 5000-6000rpm and a maximum torque of 250Nm at 1750-3000rpm.

20

1

Share

How to View Videos on a Car Dash Cam?

To view videos on a car dash cam, press the menu button and select the preview mode. A dash cam is a device that records images and audio during vehicle operation. After installation, it can document the entire driving process in video and audio, providing evidence in case of traffic accidents. The installation method for a car dash cam is as follows: 1. Use a clip to secure the dash cam near the car's rearview mirror; 2. Determine the length of the power cord and plan the wiring accordingly; 3. Tuck the power cord into the gap of the car's ceiling and guide it down along the door frame to behind the glove box.

20

1

Share

How to Use the Vehicle Anti-Slip System?

The usage method of the vehicle anti-slip system is: The anti-slip system is enabled by default and does not require manual activation. For vehicles equipped with an anti-slip system, pressing the anti-slip system button can deactivate the system, and pressing it again will reactivate it. The vehicle anti-slip system includes: 1. Brake force distribution system; 2. Anti-lock braking system; 3. Traction control system; 4. Vehicle dynamic control system. The working principle of the vehicle anti-slip system is: It determines the driving state based on sensor signals and uses a control unit that performs precise calculations. When rotation, understeer, or oversteer occurs, it individually controls each wheel to enhance vehicle stability.

5

3

Share

What are the symptoms of a bad wheel bearing?

The symptoms of a bad wheel bearing are: 1. Abnormal noises while driving; 2. Body vibration during driving; 3. Unstable driving at high speeds. The main functions of the wheel bearing are: 1. Supporting weight and providing precise guidance for the rotation of the wheel hub; 2. Bearing axial and radial loads. Methods to determine if the wheel bearing is bad include: 1. Opening the window to listen if the noise comes from outside the vehicle; 2. Increasing the speed and then shifting to neutral to let the vehicle coast, observing the noise; 3. Temporarily stopping the vehicle and checking if the axle temperature is normal; 4. Lifting the vehicle with a lift and manually rotating each of the four wheels quickly.

20

0

Share

How to Reset the Maintenance Reminder Light on a Car?

The method to reset the maintenance reminder light on a car is: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button on the instrument cluster; 3. Turn on the ignition switch; 4. The odometer display will begin counting down. When the display shows 0000.0, release the button to reset the maintenance reminder light. The purpose of the maintenance reminder light is to alert the owner that the car requires maintenance. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing.

1

0

Share

How Often Should Car Tires Be Rotated Front to Rear?

Car tires should be rotated front to rear approximately every 20,000 kilometers. The rotation method depends on the drivetrain configuration: 1. Rear-wheel drive vehicles: Non-driven wheels should be swapped diagonally (left front to right rear, right front to left rear), while driven wheels should be moved straight (right rear to right front, left rear to left front); 2. Front-wheel drive vehicles: Non-driven wheels should be swapped diagonally (right rear to left front, left rear to right front), while driven wheels should be moved straight (right front to right rear, left front to left rear); 3. Four-wheel drive vehicles: Tires should be moved straight front to rear (right rear to right front, left rear to left front). The reasons for rotating tires front to rear are: 1. To maintain even wear across all four tires, thereby extending their overall service life; 2. To ensure handling stability and driving safety.

17

4

Share

Why Won't the Scooter Start?

How to use the cruise control in Magotan?

How to View Videos on a Car Dash Cam?

How to Use the Vehicle Anti-Slip System?

What are the symptoms of a bad wheel bearing?

How to Reset the Maintenance Reminder Light on a Car?

How Often Should Car Tires Be Rotated Front to Rear?

How to Add Gasoline Additives?

What level of car does the Volkswagen Teramont belong to?

What to Do If the Front Bumper Is Knocked Loose?

Why Can't the Car Key Unlock the Door?