···
Log in / Register

Why Won't the Chery Tiggo 8 Automatic Transmission Start?

4 Answers
KarterDella
07/29/25 6:33pm

Here are the reasons why the Chery Tiggo 8 automatic transmission won't start: Car battery is low on power: When the car battery is low on power, the car may fail to start. Reasons for the battery being low on power include lack of water in the battery, battery failure, or prolonged use of the air conditioning. Especially in winter, when temperatures are lower, the car's power consumption is significantly higher than in other seasons. The battery's capacity also decreases in low-temperature environments, making it difficult to start the vehicle. Car ignition system failure: The car ignition system's function is to provide high voltage to the spark plugs at the right time to ensure the car runs normally. If the car fails to start, it could be due to a fault in the ignition system.

Was this review help?
13
3
Share
LondynDella
08/14/25 11:39am

My Tiggo 8 automatic transmission suddenly wouldn't start a few days ago, which really gave me a scare. The most common cause for this is usually a dead battery, perhaps from leaving the lights on when parked or not using the car for too long. I tried jump-starting it, but sometimes it's the starter motor that's faulty or stuck, and you might need to give it a tap before trying again. If you only hear a clicking sound when attempting to start with no engine turnover, it's likely a starter motor issue. Alternatively, if the automatic transmission isn't in Park, the sensor might mistakenly lock the starting circuit. I also checked the fuel gauge—running out of gas can prevent starting too, so I always glance at the fuel level before driving. In such situations, don't floor the accelerator; first, try using a portable charger or call for a tow truck—safety comes first. Regular battery maintenance can help avoid these troubles, especially since the Tiggo 8's battery typically lasts about 2-3 years.

Was this review help?
12
1
Share
Expand All
MacHannah
10/14/25 6:48am

Hey, I've been playing with and repairing cars for many years. When encountering a no-start issue with an automatic transmission, you need to troubleshoot step by step. Start with the basics: check if the battery voltage is sufficient using a multimeter—if it's low, jump-start it or replace the battery. As for the starter motor, listen for the cranking sound; if it's silent as a chicken, the relay might be burnt or a fuse blown—find and replace the corresponding one in the fuse box. With an automatic transmission, you must press the brake and shift to P before ignition, or the safety lock will prevent it. My car once had a malfunction due to a dirty transmission position sensor—cleaning the connector fixed it. Sometimes, a bug in the Tiggo 8's anti-theft system can also cause a no-start—try disconnecting and restarting the power. Don’t attempt to repair complex circuits yourself; calling a professional technician is safer and more reliable. Safety should always be the bottom line. Regular maintenance checks on these components can prevent many issues.

Was this review help?
20
5
Share
Expand All
AlinaDella
11/27/25 7:42am

When the Tiggo 8 automatic transmission fails to start, the first thing that comes to mind is safety risks. A car parked in neutral or on a slope suddenly rolling away is very dangerous. Possible reasons include an aging battery with insufficient power supply or a short circuit in the starting system causing overheating. I immediately turned off the ignition key and shifted back to P (Park), checking if the lights were on to confirm the battery's condition. If the starter shows no response or the dashboard alerts, it might be due to the anti-theft lock being activated, and forcing ignition could cause more damage. In such cases, find a safe place to park and call for roadside assistance or a 4S shop for on-site service. It is recommended that owners install a battery monitor for real-time alerts to prevent such issues. Ensuring stable vehicle startup is crucial for the safety of everyone on the road.

Was this review help?
19
1
Share
Expand All
More Forum Discussions

Are the Brake Light and Turn Signal the Same Light?

Brake lights and turn signals are not the same light. Below are the differences between brake lights and reverse lights: 1. Brake Light: Refers to the light that illuminates when the car brakes. Most are installed at the rear of the car, with the main color being red, serving to alert the cars behind. It effectively helps avoid rear-end collisions and reduces traffic accidents. The brake light is bright and clear, primarily used to warn the following cars that this vehicle is slowing down or stopping. If the brake light is used incorrectly or malfunctions, it can easily lead to rear-end collisions. 2. Reverse Light: Installed at the rear of the car, it is used to illuminate the road behind when reversing and to warn cars and pedestrians behind, indicating that the vehicle is reversing. It also functions as a light signal device, with the light being white.
5
5
Share

How to Adjust the Dashboard of Volkswagen Lavida?

The method to adjust the dashboard of Volkswagen Lavida is: 1. There are two buttons on the dashboard, the left one has a time symbol, and the right one is the SET button; 2. Press the left time button, and when the time on the trip computer flashes, press the right SET button; 3. Press SET once to adjust once, and hold the SET button to make the time numbers jump quickly. The teardrop-shaped headlights of the Volkswagen Lavida are very unique, and their design gives a sense of familiarity. The taillight design of the Volkswagen Lavida emphasizes the echo with the front face, and the rear design is very compact. The cleverly designed chrome strip between the taillights connects the entire rear to form a whole.
11
1
Share

Will a faulty exhaust check valve cause oil burning?

Exhaust check valve failure will not cause oil burning. The exhaust valve refers to the circulation system that returns exhaust gases from the crankcase to the intake system for re-entry into the cylinders for combustion. The function of the automobile exhaust valve is to allow exhaust gases to recirculate into the cylinders for combustion. A small amount of exhaust gas reduces the temperature in the cylinders during combustion. Since NOX is generated under high-temperature, oxygen-rich conditions, this inhibits NOX formation, thereby reducing NOX content in the exhaust. Symptoms of a faulty exhaust check valve include extremely unstable idle speed or even stalling, flashing malfunction indicator light, failure to meet annual emission inspection standards, oil burning, and blue exhaust smoke. When the exhaust valve remains constantly open, the vehicle may exhibit black smoke emission, poor acceleration, and increased fuel consumption. When the exhaust valve remains constantly closed, it will affect the vehicle's exhaust emissions.
4
4
Share

Will a vehicle be automatically deregistered if it fails the annual inspection?

There is no time limit for automatic deregistration of license plates due to a vehicle failing the annual inspection. Below are the relevant details: 1. Road Traffic Law stipulates: Vehicles that fail to participate in the annual inspection on time are not allowed to be driven on the road, with a fine and 3 points deducted. Failing the annual inspection will not lead to deregistration, with the latest deadline being the end of the month noted on the vehicle registration certificate; no late fees are charged, but a fee for missing the inspection is required if it exceeds one inspection cycle. 2. Additional information: The materials required for the owner to process vehicle scrapping procedures are as follows: Vehicle registration certificate; Vehicle license. For organizational vehicles, the organization code certificate (copy) with the official seal; For personal vehicles, the owner's ID card; Proof materials for accident vehicles.
12
1
Share

What is the reason for the left side of the vehicle crossing the line during curve driving?

The reason is turning the steering wheel too early or too late. Here are some tips for curve driving: 1. When entering the curve: Try to keep the vehicle close to the right side line, because the first turn of the curve is to the left, and keeping the vehicle too close to the left can easily cause crossing the line. 2. After entering the curve: Observe the small rearview mirror on the left side of the vehicle. When the mirror covers the white solid line, quickly turn the steering wheel one full turn plus 45 degrees to the left. 3. While driving: Continue to observe whether the rearview mirror and the white solid line remain aligned. If the direction deviates, correct it promptly. If the rearview mirror is outside the white solid line, turn the steering wheel to the left; if it is inside the white solid line, turn the steering wheel to the right. 4. When the left front of the vehicle touches the white solid line: Quickly straighten the steering wheel and continue to observe the white solid line. 5. When the right front rearview mirror approaches the white solid line: Quickly turn the steering wheel one full turn plus 45 degrees to the right, keeping the rearview mirror and the white solid line always aligned.
19
3
Share

How to distinguish between A4 and A6?

Methods to distinguish between A4 and A6: 1. Different exterior dimensions: The A4 is a mid-size sedan with a body length of 4858mm; the A6 is a full-size sedan with a body length of 5050mm. 2. Different vehicle positioning: The A4 is mainly targeted at young consumers and positioned as a sports sedan, while the A6 is aimed at those with business needs and is a full-size luxury sedan. As a luxury brand under Volkswagen, Audi's engines are equipped with turbocharged direct injection technology. Audi engines are generally equipped with the AVS (Audi Valvelift System) variable valve lift system, which allows for more precise regulation of cylinder intake airflow.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.