Why Won't the Car Start After Shutting Off?

Is a tire pressure of around 2.9 bar dangerous on the highway?

Highway tire pressure around 2.9 bar is dangerous, as the normal tire pressure range is between 2.4-2.5 bar. The hazards of excessive tire pressure are as follows: Tire friction and adhesion will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates localized wear on the central tread pattern of the tire, shortening tire lifespan; increased body vibration indirectly affects the lifespan of other components; it causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the car while driving; puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and impacts can cause internal cracks and explosions, leading to blowouts. The method for resetting tire pressure is as follows: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep," then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the dashboard warning light will turn off, completing the tire pressure reset.

13

3

Share

Does Mercedes-Benz Antifreeze Need to Be Diluted with Water?

Mercedes-Benz antifreeze needs to be diluted with water. The original high-concentration antifreeze has a very high freezing point, so it is necessary to add half the amount of water, meaning the mixing ratio of antifreeze to water should be 1:1. This way, the freezing point of the antifreeze can reach -37 degrees Celsius. Composition of Antifreeze: The main components of antifreeze are: 50% purified water, 40% methanol, and 10% other substances. Types of Antifreeze: Antifreeze is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can Different Antifreezes Be Mixed? The same brand of antifreeze must be used. Different brands of antifreeze may have varying production formulas. If mixed, multiple additives may undergo chemical reactions, rendering the additives ineffective. How to Choose Antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in several specifications with freezing points of -15 degrees Celsius, -25 degrees Celsius, -30 degrees Celsius, -40 degrees Celsius, etc. Generally, it is advisable to choose one that is at least 10 degrees Celsius lower than the lowest temperature in your region.

6

5

Share

Does a car purchased in October 2013 require an annual inspection this year?

A vehicle purchased in October 2013 needs to undergo an annual inspection before the validity period of the 2020 annual inspection expires. Below is the relevant information: Annual Inspection Policy: The new annual inspection policy was implemented starting November 20, 2020. Vehicles inspected within ten years after implementation can be issued an annual inspection pass with a validity period of two years. According to the new regulations, new cars within six years are exempt from inspection twice (an inspection label must be applied for every two years, but the vehicle does not need to undergo on-site testing); in the 6th and 8th years, the vehicle must undergo on-site testing. For private cars older than ten years, the original inspection cycle still applies, i.e., annual inspection once a year for cars between 10 and 15 years old, and twice a year for cars older than 15 years. Applying for an Inspection Pass: Before applying, the owner of the motor vehicle must resolve all traffic safety violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle's license, compulsory motor vehicle traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption certificate, and motor vehicle safety technical inspection pass certificate.

9

1

Share

What is the function of the ECO button in a car?

The ECO button is the activation key for the car's economical driving mode function. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. The eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button; when the dashboard eco indicator light turns on, it merely serves as a reminder function. The eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars employ the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the eco mode. However, it is unnecessary to activate the eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of the eco mode but also impact the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or in N/P gear and manual mode, the eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine's computer prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not function in such cases.

13

0

Share

How long can the license plate quota be retained after vehicle scrapping in Beijing?

After scrapping a vehicle in Beijing, the original license plate can be retained for more than one year, which means the original plate can be used for motor vehicle registration within one year. Here is relevant information: Vehicle scrapping age limit: The vehicle scrapping age limit refers to a safety inspection system based on the number of seats and usage period during the vehicle's service life. It is stipulated that small and micro non-operational passenger cars, large non-operational sedans, and wheeled special machinery vehicles have no usage age limit. Delayed scrapping vehicles: For vehicles requiring approval procedures for delayed scrapping, the current approval process still applies; for vehicles that have already undergone delayed scrapping procedures but do not meet the new scrapping standards, they will be managed as normal vehicles, with a reprinted vehicle license supplement and annual inspection stamps as required, without the delayed scrapping inspection seal; for vehicles that should be scrapped according to the old standards but have not completed deregistration, the new regulations will apply.

6

4

Share

How Often Should Spark Plugs Be Replaced in a Sedan?

Under normal maintenance conditions, sedan spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. Below are general maintenance replacement standards for reference: Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km. Methods to determine if spark plugs are damaged: Remove the spark plug and inspect its appearance color to assess its condition. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with electrode gaps between 0.8-0.9mm and no signs of electrode burning. If the spark plug has oil stains or deposits but isn't damaged, it can continue to be used after cleaning. If the spark plug is severely damaged with signs like blistering at the tip, black streaks, cracks, or melted electrodes, identify the cause of damage, fix the issue, and replace the spark plug. Additionally, if the spark plug appears sooty black, it indicates incorrect heat range selection, rich fuel mixture, or oil leakage.

15

3

Share

Why Won't the Car Start After Shutting Off?

Is a tire pressure of around 2.9 bar dangerous on the highway?

Does Mercedes-Benz Antifreeze Need to Be Diluted with Water?

Does a car purchased in October 2013 require an annual inspection this year?

What is the function of the ECO button in a car?

How long can the license plate quota be retained after vehicle scrapping in Beijing?

How Often Should Spark Plugs Be Replaced in a Sedan?

What are the symptoms of a broken car suspension spring?

Does a car battery need to be replaced after 6 years?

Can a 70-year-old driver still operate a vehicle?

Can 0w20 engine oil be used in summer?