Why won't the battery start the engine?

2 Answers
SanZachary
07/25/25 8:21am
It may be due to insufficient battery voltage. Here are the detection methods: 1. Low car battery voltage; Specific detection method: Use a multimeter voltage range to test the battery voltage. If it's below 10V, replacement is recommended. If it's around 11V, it can barely be used, but prepare for replacement. Above 12V is acceptable for use; 2. Check if it's caused by carbon deposits; If the vehicle has run about 20,000 KM, focus on inspecting and cleaning the throttle valve; 3. Inspect, test, and replace the spark plugs; 4. Confirm the quality of the gasoline used; 5. Inspect the ignition switch; 6. Test and inspect components related to the starting and fuel supply system, such as the starter, fuel pump, and sensors.
Was this review help?
5
1
Share
LeDaisy
08/10/25 6:53pm
I've been driving this car for five years and have encountered the battery failing to start several times, mostly due to battery aging. The lifespan of a battery is generally 2-5 years, and after that, the power gradually declines. One winter morning when I was heading to work, the car wouldn't start, and after a lot of trouble, I realized I had left the audio system on the night before, which drained the battery. It's advisable to use simple tools to test the battery voltage; if it's below 12 volts, it might be a sign of low power, and you can temporarily remedy it with jumper cables or a charging device. But more importantly, it's about daily habits: check that all devices are turned off when parking, don't let the car sit idle for too long; if the battery is over 3 years old, it's better to replace it outright to avoid safety risks at critical moments. Regular maintenance saves both worry and hassle.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

At what voltage does a car battery fail to start the vehicle?

When the car battery voltage drops below 9.5V, it becomes difficult to start the vehicle. Additional information about car batteries is as follows: 1. The charging voltage of a car battery is generally around 13.3-14V; too high a voltage can accelerate battery aging. 2. Lead-acid batteries for cars are 12V, meaning the car battery consists of 6 cells connected in series, with a rated voltage of 12V. 3. The letter Q indicates a car battery, while A and W represent battery types. A stands for dry cell type, W stands for maintenance-free battery, and if there is no marking, it indicates a standard battery type.
7
3
Share

Why does the car engine suddenly become louder?

The reasons for a sudden increase in engine noise are as follows: 1. Deterioration or loosening of engine mounts. Engine mounts are rubber blocks placed between the engine and the frame to reduce vibrations and provide cushioning during engine operation, as well as to secure the engine. Once these mounts deteriorate or become loose, the engine will vibrate, and the faster the speed, the louder the vibration noise. 2. Improper use of engine oil. If the viscosity of the oil does not match the engine, it can easily lead to carbon buildup, causing the engine noise to increase. 3. Engine misfire. The exhaust gas flow from the car shows obvious intermittency, and the exhaust pipe shakes violently, making it easy to hear abnormal engine noises. 4. Cold start. During a cold start, the engine's lubrication is poor, the oil flow is sluggish and thicker, leading to abnormal noises from mechanical wear.
10
0
Share

How to Apply for Temporary License Plates for a New Car?

New car temporary license plates can be processed by the 4S dealership or by the owner themselves. If processed through the 4S dealership, the owner needs to provide their ID card, the fourth copy of the car purchase invoice, the original and a copy of the vehicle qualification certificate, and the original and a copy of the third copy of the compulsory insurance. Below are some precautions regarding the use of temporary license plates: 1. The validity period of temporary license plates generally does not exceed thirty days. There are four types: temporary license plates for administrative districts, cross-administrative district temporary license plates, temporary license plates for testing purposes, and temporary license plates for special-type motor vehicles. 2. New cars using temporary license plates must not exceed 15 days, and the owner should promptly apply to the vehicle management authority for formal license plates. After expiration, the owner may face penalties such as vehicle impoundment, a fine of 200 yuan, and a deduction of 12 points.
10
1
Share

Reasons for Cracks on Tire Sidewalls?

Tire sidewall cracks can occur due to the following reasons: 1. Natural aging. During prolonged use, exposure to wind and sunlight causes rubber to naturally age, leading to cracks—this is a normal phenomenon. Generally, tires on vehicles over 5 years old will develop cracks, which do not affect normal usage. However, if the cracks are dense or reveal the inner tire, immediate replacement is necessary to prevent safety hazards. 2. Impact damage. When driving frequently on uneven or gravel roads, tires are inevitably subjected to impacts, which is also normal. Minor impacts do not hinder normal use, but severe impacts can reduce tire lifespan, requiring timely replacement.
12
3
Share

How to Reset the Car Maintenance Reminder?

Method one to reset the car maintenance reminder: 1. Turn off the ignition switch. 2. Turn on the ignition switch while holding down the odometer hour reset button. After ignition, the reminder message will still be displayed. 3. Within 30 seconds, press and hold the odometer hour reset button for about 3 seconds, and the reminder message will be completely reset. 4. Within 30 seconds, press and hold the odometer hour reset button for about 3 seconds, and the reminder message will be completely reset. Method two to reset the car maintenance reminder: 1. Turn off the ignition switch. 2. Press the clock adjustment button "SET" while turning on the ignition switch. 3. Release the "SET" button, then press the "SET" button once more. 4. Turn off the ignition switch, then turn it on again to see if it has been reset. If not, you must start from the beginning and repeat the process several times.
20
3
Share

What lights to turn on when temporarily parking on the roadside?

When temporarily parking on the roadside, turn on the right turn signal. Here is more information about the use of turn signals: 1. When overtaking, first turn on the left turn signal, then the right turn signal after overtaking. 2. When entering the highway, turn on the left signal. When exiting the highway, always turn right. No need to turn on the signal when entering a roundabout, but turn on the right turn signal when exiting the roundabout. 3. Generally, when making a U-turn, turn left, so turn on the left turn signal. When changing lanes to the left, turn on the left turn signal, and when changing lanes to the right, turn on the right turn signal. 4. When preparing to turn, turn on the signal in advance to give the driver behind you a reaction time.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.