Why won't my Mercedes-Benz start?

How to align the timing of the Chery Flagcloud 2?

Aligning the timing of the Chery Flagcloud 2 involves the following steps: 1. Rotate the crankshaft to align the mark on the transmission with the scale line on the flywheel. 2. Rotate the camshaft to align the mark on the camshaft timing gear with the base of the valve chamber. 3. Locate the drive end of the oil pump shaft and align the raised rectangular side with the direction of the crankshaft. 4. Insert the distributor assembly into the mounting hole and secure it. 5. Align the distributor rotor with the mark on the housing, then cover the distributor cap and connect the spark plug wires and other internal components. 6. Install the timing belt and start the engine for inspection. Re-adjust if any discrepancies are found.

13

1

Share

Where is the Yi license plate from?

Yi is the license plate of Shijiazhuang City, Hebei Province. The license plate number is the identification of the vehicle, just like an ID number for a person. Here is some related information: 1. Apart from the current personalized license plates, the currently used 92-style motor vehicle license plates consist of a Chinese and English letter issuing authority code and a five-digit number. For example, "SuA-12345", "Su" represents Jiangsu Province, and A is the license plate code issued by the Nanjing Public Security Bureau Vehicle Management Office, indicating that this vehicle was issued by the Nanjing Public Security Bureau Vehicle Management Office. The following five digits are the serial number. 2. For non-personalized license plates, in principle, the five-digit serial number starts from 00000 and is issued in numerical order until 99999. When this number is exceeded, English letters are used as the prefix, starting from A0000 to A9999, then B0000 to B9999, and so on until Z9999. If these 2.6 million numbers are exhausted, there are two ways to continue numbering. One is to place the English letter in the second position, starting from 0A000 to 0A999, then 1A000 to 1A999, and so on until 9Z999.

4

Share

Why is the Electric Power Steering Wheel Slow and Weak to Return?

Here are the reasons why the electric power steering wheel is slow and weak to return: 1. Insufficient oil pressure in the power steering pump, caused by insufficient power steering fluid or pump wear. If it's not power steering, first confirm the four-wheel alignment, and if there are no issues, proceed to check the steering clearance. 2. Wear on the steering switch return tab or the steering wheel return slot. 3. Every vehicle has angles such as front wheel toe-in and camber. When no force is applied to the steering wheel, the return force generated by the front wheels, if greater than the resistance of the mechanical steering wheel itself, will cause it to return automatically. When the angle is small, there is no return function, and speed should be considered—faster speeds make the steering wheel lighter and harder to control, with slight movements causing more significant deviations.

6

3

Share

What Causes Backfiring in the Exhaust Pipe?

Regarding the causes of backfiring in the exhaust pipe, the following are the reasons: 1. Overly rich air-fuel mixture. An excessively rich combustible air-fuel mixture can cause backfiring in the exhaust pipe. At low engine speeds, the sound is heavy and unstable; at high engine speeds, the backfiring significantly improves or even disappears, which is a key indicator of backfiring caused by an overly rich mixture. 2. Excessive fuel level in the float chamber. This not only leads to an overly rich combustible air-fuel mixture but also allows some fuel to enter the cylinder without being fully atomized. The incomplete combustion in the cylinder then carries the fuel into the muffler, where it reignites, causing backfiring. 3. Insufficient ignition timing advance. Incorrect valve clearance in a four-stroke engine, burnt valves that fail to close tightly, excessive valve overlap angle, or incorrect installation of the timing gear can cause the exhaust valve to open too early, resulting in backfiring.

6

4

Share

What is the maximum speed you can drive with a speed limit of 70?

Driving over 70 kilometers per hour when the speed limit is 70 kilometers per hour is considered speeding, meaning the maximum speed you can drive is 70 kilometers per hour. According to relevant regulations, if a motor vehicle violates the speed limit on the road, corresponding penalties will apply. Below is relevant information: 1. When a vehicle is speeding, the braking distance increases, and the driver must react quickly in emergency situations. If the reaction is not timely, serious traffic accidents may occur. Therefore, to ensure traffic safety, it is essential to strictly adhere to traffic rules. 2. According to Article 42 of the Road Traffic Law, motor vehicles driving on the road must not exceed the maximum speed indicated by speed limit signs. On roads without speed limit signs, a safe speed should be maintained. When driving at night, on dangerous road sections, or under adverse weather conditions such as sandstorms, hail, rain, snow, fog, or ice, the driving speed should be reduced. 3. Article 44 of the Regulations states that on roads with two or more motor vehicle lanes in the same direction, the left lane is the fast lane, and the right lane is the slow lane. Motor vehicles driving in the fast lane should maintain the speed specified for that lane. If they cannot reach the required speed, they should move to the slow lane. Motorcycles should drive in the rightmost lane. If there are traffic signs indicating the driving speed, vehicles should follow the indicated speed. When overtaking in the slow lane, motor vehicles may temporarily use the fast lane.

12

2

Share

What does the SVS light mean?

SVS light on indicates that the engine control unit has detected an error signal from a certain sensor or that it has exceeded the usage standard. The reasons for the SVS light being on are as follows: 1. Poor engine combustion state, excessive wear. 2. Engine knocking. 3. Poor quality of car fuel. 4. The inside of the engine cylinder is not clean, with accumulated carbon deposits. 5. The electronic control unit cannot obtain engine data. Additional information: When the ignition switch is turned on, the car's SVS indicator light will light up for automatic inspection and will automatically turn off after a few seconds, which is a normal phenomenon. If the SVS light stays on, it indicates a fault in the car's electronic control system.

8

2

Share

Why won't my Mercedes-Benz start?

How to align the timing of the Chery Flagcloud 2?

Where is the Yi license plate from?

Why is the Electric Power Steering Wheel Slow and Weak to Return?

What Causes Backfiring in the Exhaust Pipe?

What is the maximum speed you can drive with a speed limit of 70?

What does the SVS light mean?

How old should a newborn be to sit in a car seat?

What is a CVT Transmission?

What is the difference between synthetic oil and mineral oil?

Is there a big difference between spark plug heat range 6 and 7?