Why won't my Focus start?

2 Answers
DiBrooke
09/01/25 8:45am
The reasons why a Focus won't start are as follows: 1. First, check the spark plugs. Since spark plugs are crucial to the car's ignition system, and the ignition system is key to engine operation, the performance of spark plugs directly affects the vehicle's overall working performance and efficiency. 2. Battery depletion: The characteristic symptom is that the starter begins to turn but lacks sufficient power (slow rotation), eventually making only a clicking sound without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can prevent the vehicle from starting, especially after prolonged short-distance, low-speed driving in winter when battery voltage drops below rated levels. If this occurs, call a service center for assistance, jump-start the vehicle, or temporarily start it, but be sure to take it to a service center for battery recharging afterward. 3. Fuel flow obstruction: The characteristic symptom is no oil pressure in the engine's fuel supply line. This situation often occurs on extremely cold mornings due to long-term contamination of the fuel lines. At very low temperatures, water mixed with debris can block the fuel lines, resulting in failure to start.
Was this review help?
11
1
Share
GenevieveFitz
09/14/25 4:24am
I've been driving a Focus for several years and have encountered several instances where it wouldn't start. Most of the time, it's a battery issue, such as an old or dead battery, especially noticeable during cold winters. You can first check if the battery terminals are rusty or loose. Turn the key to the start position and listen – if you hear a clicking sound with no response, the battery is likely the problem. Alternatively, it could be a faulty fuel pump; even with a full tank, the car won't start. Worn-out spark plugs causing ignition issues are another possibility. Don't panic in such situations; try jump-starting the car first. If that doesn't work, contact a repair shop to replace the battery or inspect the fuel system. Remember, regular maintenance checks on the battery and fuel pump can prevent such embarrassing situations, saving you from being stranded in a rush on a cold morning.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What to Do If You Run Red Lights Twice and Get 12 Points Deducted? Can You Still Drive?

Running red lights twice resulting in 12 points deducted means the cumulative demerit points have reached the maximum limit. The traffic management department of the public security organ will confiscate the driver's license, and the driver will no longer be allowed to drive. The driver must participate in road traffic safety laws and regulations training and take an exam. If the exam is passed, the demerit points will be cleared, and the driver's license will be returned. If the exam is failed, the driver must continue with the training and retake the exam. Methods to avoid running red lights while driving: When there are arrow signal lights, follow the arrow lights; otherwise, follow the round lights. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light just starts flashing, if you are close and moving fast, you should proceed, as stopping might be difficult and could result in crossing the stop line. If you are far away, moving slowly, or the intersection is congested, you should stop. When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line and approach an intersection.
14
2
Share

Can I Use My Old License Plate If I'm Not Satisfied with the New Plate Selection?

You can reselect. According to the regulations of different local vehicle management offices, you need to wait for 3 days until the originally selected number becomes invalid, and then you can choose a new license plate. Online selection method: Log in to the traffic management bureau or the online vehicle management office, enter the license plate self-selection website, and select the "Online Vehicle Management Office" online self-service license plate selection system. Enter the owner's name, ID card or organization code certificate, vehicle identification number (VIN), and invoice. After verification, you can search and select the motor vehicle license plate number according to the coding rules. Below is additional information: License plate numbers cannot be changed: If the vehicle has already been registered with the vehicle management office, the selected license plate number cannot be changed. Selection stage: If you are only in the selection stage and are not satisfied with the options, you can switch to the next batch and reselect. License plate lottery: When a new car is registered at the vehicle management office, after completing the relevant procedures, multiple numbers are drawn during the license plate lottery. You can then choose your preferred number from these. If you are not satisfied with any of the numbers, you can give up this round and participate in the lottery again. If you want to change the license plate after confirming the number, you need to go to the vehicle management office to complete the relevant procedures.
8
1
Share

How much engine oil should be added to the BMW B48 engine?

BMW B48 engine requires 5.5 liters of engine oil. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. The engine consists of: the engine block, crankshaft and connecting rod mechanism, valve train and intake/exhaust system, fuel supply system and governor, starting device, cooling system, and lubrication system. Engine maintenance methods include: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly remove carbon deposits from the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable engine speed.
13
1
Share

Is Volvo wholly owned by Geely?

Volvo is a wholly-owned subsidiary of Geely. In terms of ownership, Volvo is directly under Geely Holding, but in terms of operation, Volvo has a completely independent management team separate from Geely Holding. To maintain the independence and equality of these two companies, their collaboration must be facilitated through a "Dialogue and Cooperation Committee"; the agreement for Geely Holding's acquisition of Volvo even explicitly stipulates that Geely cannot directly use the technologies developed by Volvo. Compared to the Volkswagen Group and Skoda, which share a highly similar "technical lineage" as parent and subsidiary, Geely Holding and Volvo appear more like brothers. In the early stages of Volvo's development, Geely Holding, as the elder brother, would step in to assist, but it would never directly interfere in Volvo's internal affairs; once Volvo matures, it will in turn contribute back to Geely Holding. This cooperative model between Geely Holding and Volvo has both advantages and disadvantages.
3
2
Share

What are the reasons for ABS false intervention during low-speed braking?

The reasons for ABS false intervention during low-speed braking are as follows: Reason 1: The sensing part of the ABS speed sensor is covered by mud, sludge, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal gear ring to restore normal function. Reason 2: Poor signal quality due to loose connections between system lines or poor contact of the ABS relay can cause system failure. The most common issue is a loose speed sensor wire connection, which will also show as a poor speed sensor signal in the ABS computer's fault memory. Solution: Check the line connections and reconnect any loose parts.
4
1
Share

What is the reason for the Hongqi H5 displaying a 'Check Engine' warning?

The reason for the Hongqi H5 displaying a 'Check Engine' warning is fuel quality issues. Taking the 2020 Hongqi H5 as an example, it is a mid-size sedan with body dimensions of 4945mm in length, 1845mm in width, and 1470mm in height, a wheelbase of 2875mm, and a fuel tank capacity of 58 liters. The 2020 Hongqi H5 features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine producing a maximum horsepower of 169 PS, a maximum torque of 258 Nm, and a maximum power of 124 kW, paired with a 7-speed dual-clutch transmission.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.