Why was the Zontes 310 discontinued?

1 Answers
LaNaomi
07/24/25 3:52pm
According to netizens, it was due to internal management issues that led to a lack of responsibility among employees. Here is a detailed introduction to the Zontes 310: 1. Power: The bike is equipped with a single-cylinder, water-cooled, four-valve 312cc engine with a maximum power output of 26kW. As a rally bike, it comes with added weight from features like crash bars, windshields, handguards, and a rear rack, achieving a 0-100 km/h acceleration time of 6.8 seconds. 2. Features: It includes an electric windshield, keyless ignition, LED headlights, a full LCD instrument panel with a small storage compartment underneath, Bosch ABS system, and both sport and comfort riding modes.
Was this review help?
16
4
Share
More Forum Discussions

How to Drain Water from Motorcycle Fuel?

Disconnect the fuel pump's outlet pipe, turn the key, and the fuel pump will operate automatically for a few seconds. Repeat the process of turning the key on and off several times to drain the fuel tank. Then, add 1 liter of gasoline, turn the key again, and wait until the ejected gasoline has expelled all the water, indicating that the water in the motorcycle fuel has been completely drained. Below is an extended introduction about motorcycles: 1. Basic Information: Motorcycles encompass a wide range, including super sports motorcycles and touring motorcycles. They all possess the functionalities of sports motorcycles, hence they can also be categorized as sports motorcycles. 2. General Categories: Road motorcycles can be divided into three main categories: super sports motorcycles, touring motorcycles, and American motorcycles. Since these motorcycles are primarily used on smooth paved roads, they are also known as urban motorcycles. The concept and scope of road motorcycles are quite ambiguous; in fact, they might be better referred to as standard motorcycles. Structurally, road motorcycles are only suitable for paved roads, where they can achieve excellent performance. Conversely, they encounter many difficulties when ridden in off-road conditions. In contrast, there are off-road motorcycles, which can be further classified by usage area into touring off-road motorcycles and urban off-road motorcycles. 3. Historical Origins: In the global history of vehicle development, bicycles came first, followed by motorcycles, and finally cars. The origins of motorcycles worldwide are in countries like Germany, France, the UK, and Italy, as well as the United States in North America. The world's very first motorcycle was created in 1769 by the Frenchman Nicholas Cugnot, using a steam engine.
3
1
Share

What are the differences between the Wuling LSI engine and the B12 engine?

Wuling LSI engine and B12 engine differ in terms of manufacturer and power. Below are the specific details about the Wuling LSI engine and the B12 engine: Wuling LSI engine: The Wuling LSI engine is manufactured by SAIC-GM. It is a 1.2L displacement multi-point fuel injection engine with a naturally aspirated intake method. It features 4 cylinders arranged in an L configuration, with a maximum speed of 5600rpm. It can deliver a maximum horsepower of 82Ps (reaching a maximum power of 60.3kw at 5600rpm) and a maximum torque of 115N·m at 3600-4000rpm, with a compression ratio of 10.2. B12 engine: The B12 engine is manufactured by SAIC-Wuling. It has a displacement of 1.2L, a power output of 63KW, and 16 valves. The B12 series engines are divided into two power platforms: the S-TEC engine and the P-TEC engine. Due to the different brand values of Buick and Wuling/Baojun, Wuling and Baojun models are equipped with the P-TEC engine, while Buick models such as the Excelle and Sail are equipped with the S-TEC engine.
14
0
Share

How long must one wait to reschedule the Subject 4 exam?

You must wait ten days before you can reschedule the exam online. Below is relevant information: Subject 4: Also known as the Subject 4 theory test or driver theory test, it is part of the motor vehicle driver's license examination. Retake instructions: If you fail Subject 4, you do not need to retake the previously passed subjects (Subject 1, Subject 2, Subject 3). You can independently schedule a retake, and no additional fees are required for the retake. There are no scheduling restrictions for the safe and civilized driving theory test. However, the driving skills test permit is valid for three years. If the applicant does not complete the exam within this period, the results of any passed subjects will become invalid.
7
2
Share

Where is the cabin air filter located in a BMW 3 Series GT?

In the BMW 3 Series, the cabin air filter is located beneath the glove compartment on the passenger side. Replacement requires removal of the glove box. Cabin air filter replacement interval: Most vehicle cabin air filters are typically replaced annually. However, if the local area experiences severe smog or frequent sandstorms, it is recommended to replace the filter every six months. Function of cabin air filter: The cabin air filter prevents windshield condensation to maintain driver visibility and road safety. It supplies fresh air to the passenger compartment while protecting occupants from inhaling harmful gases, thereby ensuring driving safety.
7
3
Share

Can a Volkswagen Dry Dual Clutch Be Replaced with a Wet Dual Clutch?

Theoretically, it is possible to replace, but the cost is high because it's not just about replacing the clutch plates—the entire transmission needs to be replaced together. Additionally, proper matching between the engine and the transmission must be ensured. Advantages and Disadvantages of Dry and Wet Dual Clutches: The dry dual clutch offers higher transmission efficiency, but if it remains in a semi-clutch state similar to a manual transmission for prolonged periods during low-speed driving, it can easily overheat. For example, Volkswagen's 1.8T and 2.0T models use wet dual clutches. Although wet dual clutches are not as efficient in transmission as dry ones, the clutch plates are immersed in oil, effectively solving the heat dissipation issue. Moreover, wet dual-clutch transmissions are fully enclosed, making them more waterproof. Differences Between Dry and Wet Dual Clutches: Since dry dual clutches lack hydraulic oil and accompanying cooling systems, they are lighter in weight compared to wet dual clutches, providing more direct transmission and higher efficiency (resulting in better fuel economy). However, due to the inherent nature of dry dual clutches relying on friction plates to transmit torque, when driving in congested conditions requiring frequent stops and starts, the transmission temperature rises quickly. Additionally, as they rely on air cooling for heat dissipation, the cooling effect is not as efficient as wet dual clutches. Therefore, dry dual clutches are more prone to failures due to overheating in complex and congested driving conditions.
6
1
Share

Can the Land Rover Discovery Sport be modified with brakes?

Land Rover Discovery Sport can be modified with brakes. The modification of brake calipers and brake pads varies depending on the vehicle and driving habits. Purpose of brake modification: To achieve better power modification, enhance safety during braking, improve vehicle control, and better handle the car with modified brakes. Modification of brake calipers: Replacing with a set of larger, multi-piston brake calipers can directly improve braking performance. Larger brake calipers will correspondingly increase the total contact area of the brake pads; more pistons in the calipers ensure more uniform pressure and friction-generated temperature distribution on the brake pads, while also increasing the total piston area, thereby enhancing braking efficiency. Modification of brake pads: The friction of brake pads is most crucial. High-performance brake pads are mostly made of metal (cast iron, aluminum alloy) and carbon fiber as the main materials. The performance of brake pads mainly depends on the material formulation, so it's essential to obtain material information when selecting brake pads. When choosing high-performance brake pads, be careful not to overly focus on ultra-high temperature resistance and high friction coefficient. If the friction coefficient is too high, it can make braking actions overly sensitive at low speeds, causing passengers to jerk forward and backward with every light touch of the pedal. Additionally, it can lead to excessive wear of the brake discs, affecting their lifespan. High-temperature-resistant brake pads may not perform well in low-temperature conditions, significantly reducing their effectiveness.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.