Why was the Yusheng S350 discontinued?

1 Answers
OValeria
07/28/25 5:27pm
The Yusheng S350 has not been discontinued. Below is a related introduction to the Yusheng S350: 1. In terms of appearance, the Jiangling Yusheng S350's front face, adorned with rugged lower surrounds and large headlights, exudes a strong sense of power, making it very attractive. Paired with a wide body design, it aptly highlights the reliability of the Yusheng S350 as a hardcore SUV. 2. The rear design, much like the front, is very steady, aligning well with the aesthetic preferences of most consumers. In comparison, the Nissan Terra is relatively simpler, with LED headlights that offer excellent low-beam effects, though the high beams are somewhat scattered and don't illuminate as far. 3. The Jiangling Yusheng S350 is equipped with BorgWarner's TOD on-demand four-wheel-drive system. The ECU of this system can continuously calculate the optimal torque distribution ratio between the front and rear axles based on the driver's operational intent and the vehicle's road conditions, automatically distributing torque accordingly. 4. The Jiangling Yusheng S350 also comes with an Eaton mechanical rear differential lock. When there's a significant speed difference between the left and right wheels, the Eaton differential lock can automatically lock both wheels, enhancing the vehicle's safety in rain, snow, and various complex road conditions, while also lowering the driving threshold for off-road beginners.
Was this review help?
8
0
Share
More Forum Discussions

What Causes the Tail Lights of a Sedan to Stay On?

The reasons for a sedan's tail lights staying on include the brake pad return spring not retracting, the fluid level in the brake fluid reservoir dropping, tail light circuit malfunctions, a faulty brake light switch, or the handbrake not being released. Below are the relevant details: 1. Car Tail Lights: These include turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights. Turn signals and brake lights are symmetrically placed, one on each side. 2. One-Sided Tail Light Illumination: If only one tail light is illuminated, this is the vehicle's parking light function. The purpose of this function is to warn passing vehicles at night. Typically, this hidden feature can be activated by turning the turn signal to the desired side after parking and turning off the engine, thereby enabling the parking light.
8
3
Share

Where is the mechanical key ignition port of the Haval M6?

The mechanical key of the M6 can only unlock the car door. If the key runs out of battery, you can start the vehicle by placing the key inside the second cup holder. Below is relevant information about the Haval M6: 1. Exterior: The Haval M6 adopts a new design language, featuring a star-studded grille, integrated high/low beam lens headlights, a floating roof design combined with unique "boomerang" chrome strips, a roof-mounted luggage rack, and dragon-wing-style side waistlines, which enhance the overall fluidity of the body lines, creating a strong sense of technology and sportiness. 2. Powertrain: The Haval M6 is equipped with a 4G15B-1.5T manifold injection engine that meets the China VI emission standards. It delivers a maximum power of 110 kW and a peak torque of 210 N·m, offering average performance. In terms of suspension, the vehicle uses a front MacPherson and rear double-wishbone four-wheel independent suspension system, with professional SUV chassis tuning to ensure stability and comfort during high-speed cornering or when driving on bumpy roads.
19
2
Share

How to Set Up One-Touch Power Window for Corolla?

Corolla one-touch power window setup method: Directly pull up the window button to raise the window to the top, hold for 3-5 seconds then release. Next, press the window button to lower the window completely, continue holding for 3-5 seconds before releasing. Then test the one-touch function, which should now be operational. One-touch power windows refer to a system where car windows can be fully opened or closed with a single button press. Below is an introduction to one-touch windows: 1. Generally, mid-to-high-end models are equipped with one-touch window functionality, primarily for the convenience of drivers and passengers, aiming to prevent distraction from manual window operation and enhance safety. 2. Cars with one-touch windows feature a two-stage window control switch. The first stage operates like a standard power window, requiring continuous pressure on the switch until the desired window position is reached. The second stage requires only a single press and release to automatically fully open or close the window. 3. One-touch window indicators vary by model, with most currently displaying an "Auto" label. Some models refer to it as a "one-touch lock button," but the principle remains the same—holding the lock button raises all windows simultaneously, while holding the unlock button lowers them all.
7
5
Share

What Does Stability Control System Malfunction Mean?

Stability control system malfunction refers to an issue with the electronic stability program (ESP) of the vehicle; the indicator light displays the working status of the ESP, typically appearing in yellow. Stability control system malfunction: This indicates that the vehicle's stability control system is either turned off or experiencing a malfunction. If the ESP OFF button on the vehicle is accidentally pressed, pressing it once more will reactivate the ESP. However, if the ESP OFF light is illuminated due to a system malfunction, immediate inspection and repair are necessary. Solutions for stability control system malfunction: If the throttle actuator is stuck in the closed position, the ECM commands the throttle to open, but the actuator remains stuck. If the electronic throttle fuse is intact and the wiring harness is fine, test pins 1 and 2 for the throttle motor coil—if the resistance is abnormal, replace the throttle body. For electronic control system faults in the stability control system, it is recommended to visit a repair shop to read the fault codes with a diagnostic scanner and proceed with repairs. The ESP system consists of a control unit and various sensors, including the steering angle sensor (monitoring the steering wheel's rotation angle), wheel speed sensors (monitoring the rotation speed of each wheel), yaw rate sensor (monitoring the vehicle's rotation around the vertical axis), and lateral acceleration sensor (monitoring centrifugal force during turns).
18
1
Share

Is it illegal to tint taillights with black film?

Modifying car taillights with black film is not legal. Taillight modifications require filing and approval before passing the annual inspection. If the vehicle's taillights are modified without filing and the car is driven on the road directly after modification, traffic police may issue a warning and impose fines along with demerit points upon discovery. The following are the relevant regulations on car modifications: Regulation 1: Any modifications to motor vehicles must be conducted within the scope stipulated by the traffic management department, including modifications to the body color, engine, fuel type, and frame number, etc. Drivers must submit an application and obtain approval from the traffic management department before proceeding with the modifications. Regulation 2: No unit or individual may assemble motor vehicles or alter the registered structure, construction, or features of motor vehicles without authorization. Regulation 3: Unauthorized modifications to the motor vehicle's chassis, engine, suspension, transmission system, steering system, tire rims, lights, body color painting, and external structure without the permission of the public security traffic management department, as well as any technical data of the motor vehicle that does not match the data announced by the competent department of motor vehicle products under the State Council, are considered modification behaviors.
11
3
Share

What is the gear operation instruction for Haval M6?

Haval M6 driving gear shifting techniques are as follows: D for Drive, used for normal road driving; R for Reverse, functioning the same as manual reverse gear, which can only be engaged after the car has come to a complete stop; P for Park, used when the car is stationary and should be accompanied by pulling the handbrake; L for Low, also known as the climbing gear, providing greater power output; N for Neutral, used when the car is temporarily idle. Gear shifting precautions: Starting gear control: Whenever the vehicle moves from stationary to starting, the gear should remain in 1st. Sequential gear shifting: Road tests strictly prohibit skipping gears; gear changes must be sequential, such as from 1st to 2nd, 2nd to 3rd, etc. Otherwise, the test recorder will note it and deduct corresponding points. If the gear is mistakenly engaged, the candidate can immediately press the clutch, return the gear to its original position, and re-engage. Quick gear shifting: The key to gear shifting is speed—quickly completing the actions of pressing the clutch, shifting gears, and pressing the accelerator. Keep eyes on the road while shifting: Especially when driving on city streets or highways, looking down while shifting can cause the vehicle to veer off course and lead to accidents.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.