Why was the Mercedes-Benz R320 discontinued?

How to Use the Auto Hold Function?

Using the auto hold function involves the following steps: The auto hold function is not enabled by default and requires the driver to manually activate it. For instance, when waiting at a traffic light or needing to make a brief stop, pressing the auto hold button in the car will engage the function. At this point, there's no need to press the brake pedal or pull the handbrake, as the system will automatically hold the vehicle in place. The system will release automatically when the accelerator pedal is pressed. Precautions when pressing the accelerator pedal include: 1. Press and release the accelerator pedal gently for smooth operation; 2. Coordinate the release of the clutch with pressing the accelerator pedal promptly and efficiently; 3. Select the appropriate gear to ensure the engine operates mostly at medium speed and with a larger throttle opening to save fuel; 4. Before stopping or turning off the car, release the accelerator pedal first and avoid revving the engine abruptly.

20

0

Share

Can a car with manual-automatic transmission use manual mode for a long time?

Manual-automatic transmission cars can use manual mode for a long time. Manual mode of automatic transmission: In the manual mode of an automatic transmission, the clutch and gear engagement are all automatically completed by the machine. In automatic mode, upshifting generally occurs at around 2500-3000 RPM. Most automatic transmissions in manual mode will still upshift automatically if the RPM exceeds 5000, and the same principle applies to downshifting. True manual transmission: In a manual transmission, the clutch and gear engagement are all operated manually. The only difference from automatic mode is the timing of gear shifting—manual mode relies on human commands to initiate gear changes, while the machine completes the clutch and gear engagement actions.

16

5

Share

Where is the radiator located in a Ford Focus?

Ford Focus radiator is located at the front of the engine. Steps for correctly adding water to the car: 1. Open the hood switch under the driver's compartment to lift the hood, the radiator is on the right side. 2. When opening the hood, push the hood latch inward to open the radiator cap and add water to the appropriate level. 3. Note that the water added must be clean. Close the radiator cap and then the hood. Additional information: 1. Do not put engine coolant in the windshield washer fluid container. If engine coolant is sprayed onto the windshield, it may obstruct visibility of the road ahead. 2. Do not open the coolant reservoir cap when the engine is running or at high temperature.

1

0

Share

Should CRV use 5W30 or 0W20 oil?

CRV should use 5W-30 engine oil. Here is a detailed introduction to the types of engine oil grades: 1. High-temperature type (such as SAE20-SAE50): The number indicates the viscosity at 100*C, the higher the number, the higher the viscosity. 2. Low-temperature type (such as SAE0W-SAE25W): W means it is only for winter use, the smaller the number, the lower the viscosity and the better the low-temperature fluidity. 3. All-weather type (such as SAE15W/40, 10W/40, 5W/50): Indicates that the viscosity grade at low temperature meets the requirements of SAE15W, 10W, 5W respectively, and the viscosity grade at high temperature meets the requirements of SAE40, 50 respectively, belonging to the winter-summer universal type.

16

1

Share

How Many Classes Are Small Cars Divided Into?

Small cars are divided into the following 3 classes: A00 class: The A00 class is called "micro cars", with a wheelbase between 2 meters and 2.3 meters, and an engine displacement of less than 1 liter. Models like the SMART fall into this category. A0 class: The A0 class is called "subcompact cars", with a wheelbase of 2.3 meters to 2.5 meters and a displacement of 1 liter to 1.5 liters. Common models such as the Sail and Fit belong to the A0 class. A class: The A class is called "compact cars", with a wheelbase ranging approximately from 2.5 meters to 2.7 meters and a displacement of about 1.5 liters to 2.0 liters. Models like the Sagitar and Focus belong to this class.

17

0

Share

Is the FAW Jetta VS5 a joint venture car?

FAW Jetta VS5 is a joint venture car. Jetta is a sub-brand of Volkswagen. The Jetta VS5 is built on Volkswagen's advanced MQB A1 platform, equipped with an EA211 1.4T 110KW engine, and paired with an MQ250 manual transmission or an Aisin AQ250 six-speed automatic transmission. Taking the 2019 Jetta VS5 as an example, it is a compact SUV with a body size of 4419mm in length, 1841mm in width, and 1616mm in height, a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a curb weight of 1310kg. In terms of suspension, this car features a front MacPherson strut independent suspension and a rear multi-link independent suspension.

19

5

Share

Why was the Mercedes-Benz R320 discontinued?

How to Use the Auto Hold Function?

Can a car with manual-automatic transmission use manual mode for a long time?

Where is the radiator located in a Ford Focus?

Should CRV use 5W30 or 0W20 oil?

How Many Classes Are Small Cars Divided Into?

Is the FAW Jetta VS5 a joint venture car?

How to Adjust a Slightly Misaligned Steering Wheel?

What are the symptoms of insufficient engine air intake?

What engine does the 2016 LaCrosse use?

What are the dimensions of the Skoda Kodiaq?