Why was the Mercedes-Benz GLC200 discontinued?

1 Answers
StHector
07/25/25 11:43am
Mercedes-Benz GL-class was discontinued due to model replacement, with the previous GL renamed to GLS. Here is relevant information about the Mercedes-Benz GLC: 1. Introduction to Mercedes-Benz GLC: The Mercedes-Benz GLC can essentially be considered as the coupe version of the GLK. The primary reason why the GLC wasn't launched until 2016 is that it was developed based on the new generation GLK platform, which provides the GLC with more platform advantages. 2. Configuration information of Mercedes-Benz GLC: The off-road animation is particularly attractive, with parameters such as gradient, steering angle, direction of travel, roll angle, as well as throttle scale and braking intensity all displayed in real-time dynamically on the central display. The GLC comes with a relatively rich set of comfort and safety features.
Was this review help?
18
1
Share
More Forum Discussions

How to Use the ESP Button?

How to use the ESP button: The ESP switch is located in the button area in front of the gear lever. The vehicle defaults to having the ESP function enabled, and pressing this button turns the function off. ESP is the Electronic Stability Program, primarily designed to address the risk of tailspin and loss of control caused by continuous steering during emergency obstacle avoidance. When avoiding an emergency, ESP intervenes to increase the turning force of the drive wheels; when there is a tendency to tailspin, ESP will brake the wheels on the other side to reduce rotation, thereby helping the vehicle follow the driver's steering intentions. The ESP system includes ABS (Anti-lock Braking System) and ASR (Anti-Slip Regulation), representing an extension of these two systems' functionalities. Therefore, ESP can be considered a more advanced form of current automotive anti-skid devices.
3
0
Share

How to Use the Cruise Control in Skoda Octavia?

Skoda Octavia's cruise control is used as follows: 1. Press the on/off key to activate the cruise control system; 2. Accelerate to the desired speed, press the set key and release the throttle, the speed will be fixed at the current speed; 3. Step on the brake, press the cancel key, or press the on/off key to turn off the cruise control. The Skoda Octavia is a 5-door, 5-seat hatchback with body dimensions of 4675mm in length, 1814mm in width, 1460mm in height, and a wheelbase of 2686mm. It is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 85 kW and a maximum torque of 200 Nm.
14
1
Share

What are the functions of an automotive fault diagnostic tool?

Automotive fault diagnostic tools enable automotive repair technicians to quickly read faults within a vehicle's electronic control system, displaying fault information via an LCD screen to promptly identify the location and cause of the issue. An automotive fault diagnostic tool is a portable intelligent self-inspection terminal for vehicle faults (also known as an automotive decoder), used to detect car malfunctions. The principle of an automotive fault diagnostic tool involves diagnosing whether the sensors, actuators, and the ECU (Engine Control Unit) of the electronic control system are functioning normally. By determining whether the input and output voltages of the ECU vary within specified ranges, it can assess whether the electronic control system is operating correctly. When a circuit within the electronic control system generates a signal that exceeds the specified parameters, the fault information related to that circuit and its associated sensors is stored as a fault code in the ECU's internal memory. Maintenance personnel can use the diagnostic tool to read and display these fault codes.
7
1
Share

Where is the OBD interface of the Lavida located?

The OBD interface of the Lavida is located under the steering wheel in the main driver's compartment, near the knee area. You need to open the cover panel to see it. The Lavida is a compact 4-door, 5-seater sedan with the following body dimensions: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
4
0
Share

What is the reason for the clutch not retracting and unable to shift gears?

The reasons for the clutch not retracting and unable to shift gears are: 1. Air entering the clutch pipeline system; 2. Dirty clutch fluid with impurities causing severe internal wear of the clutch master cylinder or blockage of the return oil hole; 3. Insufficient or broken clutch return spring tension; 4. Excessive wear gap of the clutch linkage push rod. Precautions for clutch use are: 1. The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris; 2. The clutch can be installed coaxially or on separate shafts, and must be fixed axially; 3. When a wet electromagnetic clutch is working, lubricating oil must be added between the friction plates; 4. For the power supply and control circuit, the clutch power supply is DC 24 volts; 5. When installing a jaw-type electromagnetic clutch, a certain gap must be ensured between the end face teeth to prevent grinding during idling.
15
0
Share

How to Reset the Oil Maintenance Light on the Alivio?

The method to reset the oil maintenance light on the Alivio is as follows: 1. Insert the vehicle key and start the vehicle; 2. Press the button on the right side of the instrument panel; 3. Press the button on the left side of the dashboard until you hear a beep. The Alivio is a compact 4-door, 5-seater sedan with body dimensions of 4545mm in length, 1730mm in width, and 1475mm in height, with a wheelbase of 2650mm. It is equipped with a 1.6L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 90 kW and a maximum torque of 158 Nm. The drive system is front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using torsion beam non-independent suspension.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.