Why was the hybrid version of the 2021 Avalon canceled?

What type of oil does the Geely Vision X6 use?

Geely Vision X6 uses 5W30 engine oil. For later maintenance and oil changes, you can choose brands such as Shell, Mobil, Castrol, or Total. The user manual recommends using API quality grade SL or above. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in the Geely Vision X6 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to collect the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the engine valve cover filler port, typically filling about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

2

3

Share

What is the fuel consumption of the imported Edge 2.0t?

The fuel consumption of the imported Edge 2.0t is 10.5 liters. Relevant explanations are as follows: Introduction: The Edge is a mid-size SUV under Ford. The domestic version of the model uses two engines in total, one is a 2.0-liter turbocharged engine, and the other is a 2.7-liter twin-turbocharged engine. Additional explanation: The 2.0-liter turbocharged engine has a maximum power of 245 horsepower and a maximum torque of 390 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed is 2500 to 3500 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block.

16

3

Share

What are the symptoms of a car using low-quality fuel?

The symptoms of a car using low-quality fuel are: 1. Difficulty in starting; 2. Engine shaking at idle after starting; 3. Obvious vibration of the car body; 4. Unpleasant smell of exhaust gases; 5. Weak acceleration and increased fuel consumption. The methods to deal with a car using low-quality fuel are: 1. Replace the fuel filter and clean the fuel injectors in time; 2. Clean the inside of the cylinders; 3. Clean the three-way catalytic converter; 4. Clean the fuel tank and fuel lines; 5. Replace the fuel filter; 6. Add high-quality gasoline and clean the throttle valve carbon deposits. Using low-quality gasoline can lead to poor driving performance and vehicle accidents.

18

5

Share

What does Magotan 330TSI mean?

Magotan 330TSI represents that the model is equipped with a TSI engine belonging to the torque category of 330Nm. The relevant explanations are as follows: Introduction: The torque value of the engine is divided into several "torque categories" with an interval difference of 50Nm. Each "torque category" uses a "marker value", which is derived by rounding the average torque value of that category. For example, the marker value for engines belonging to the 300-349 torque category is 330. Additional explanation: This change aims to directly reflect the "torque performance" on the product. This adjustment better aligns with the trend of engine downsizing, encouraging car buyers to focus more on engine performance rather than displacement.

16

1

Share

What are some good methods for car paint touch-up?

Methods for car paint touch-up include: 1. Remove oil stains and rust from the car body surface, degrease plastic surfaces, and keep the car surface clean; 2. Use zinc-based phosphating liquid to phosphating the car body surface, then rinse with clean water, wait for the car body to dry before painting; 3. Pay attention to air pressure and nozzle size during spraying, ensuring the car paint surface is even and smooth; 4. After painting, drive the car into a paint baking room to dry quickly and solidify the paint. Precautions for car paint touch-up are: 1. Check if the paint color matches the original car paint; 2. Inspect the smoothness of the paint surface.

19

1

Share

What is mainly done during the first car maintenance?

What is mainly done during the first car maintenance includes: 1. Changing the engine oil, oil filter, and cleaning the air filter, as well as checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven tire wear, bulges, or damage; 4. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Checking whether all the switches and lights in the car are working properly. The precautions for the first car maintenance are: 1. Making an appointment in advance; 2. Recording any faults or questions encountered while driving and informing the staff during the maintenance registration.

1

0

Share

Why was the hybrid version of the 2021 Avalon canceled?

What type of oil does the Geely Vision X6 use?

What is the fuel consumption of the imported Edge 2.0t?

What are the symptoms of a car using low-quality fuel?

What does Magotan 330TSI mean?

What are some good methods for car paint touch-up?

What is mainly done during the first car maintenance?

What kind of engine oil should be used for Haval H7?

What are the precautions for using a spare tire?

What causes the idle speed not to return to normal when coasting in neutral gear in a manual transmission Lavida?

What is the working principle of a spark plug?