Why was the BYD Yuan SUV discontinued?

2 Answers
DanielaMarie
07/28/25 5:40pm
The reasons for the discontinuation of the BYD Yuan SUV are as follows: slightly rough workmanship and poor handling; the interior is rough, and the workmanship also needs improvement. Below are the shortcomings of the BYD Yuan SUV: 1. Poor quality: The car has a strong odor inside, the paint is thin, and the body panels are fragile—pressing them with a hand can cause dents. The interior is mediocre, with the dashboard and door panels lacking any sense of quality, and the suspension is average. 2. High noise levels: At speeds of 120 km/h, the engine and tire noise are not ideal. Driving with windows open and without air conditioning at speeds above 100 km/h makes passengers uncomfortable due to the loud noise. 3. Insufficient power: The car is equipped with a 1.5L naturally aspirated engine, with a maximum output of 80 kW, 109 horsepower, and a peak torque of 145 N·m. It is paired with either a 5-speed manual or a 6-speed dual-clutch transmission, resulting in insufficient power and slow acceleration.
Was this review help?
15
5
Share
MacEmery
08/11/25 11:47pm
As an automotive enthusiast, I believe the discontinuation of the BYD Yuan SUV is primarily a result of strategic adjustments. BYD has been fully committed to its new energy transition in recent years, especially with DM-i and pure electric technology models like the Song Plus and Dolphin series, which are more popular and profitable, leading to resource allocation favoring them. The Yuan's positioning between fuel and pure electric may have seen declining market sales or intensified competition, such as rivals in the same segment capturing market share, prompting BYD to optimize its product lineup by phasing out less competitive models. This is quite common, as automakers regularly assess product life cycles; if you're interested in it, you might consider newer models like the upgraded Yuan PLUS or the Dolphin, which offer smarter configurations and better energy efficiency. In summary, this isn't a quality issue but a natural process of industry evolution.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Does turning on the air conditioning in a car consume more fuel?

Turning on the air conditioning in a car does consume more fuel. The car's air conditioning system utilizes a portion of the engine's power, which leads to increased fuel consumption. The exact amount of additional fuel consumed depends on the vehicle's engine displacement and speed. Below is some relevant information about car air conditioning systems: 1. The car air conditioning system adjusts and controls the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to provide a comfortable environment for passengers, reducing travel fatigue. It also creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving as a ventilation device. 2. The main components of a car air conditioning system include the compressor, condenser, evaporator, receiver-drier, and expansion valve.
2
1
Share

How to Determine if a Wheel Bearing is Damaged?

There are several methods to determine if a wheel bearing is damaged: 1. Observe whether the vehicle emits a humming noise during driving. The noise from a damaged bearing is different from the engine's inherent noise. Open the window to check if the sound is coming from outside the vehicle. 2. Place your left hand on the shock absorber spring and rotate the tire with your right hand. Feel the vibration with your left hand to observe if the spring has significant vibration. If the spring vibrates noticeably, it indicates bearing damage. 3. Make a temporary stop and check the temperature of the wheel hub. If there is a significant temperature difference between the front and rear wheels, it indicates bearing damage. 4. Hold the wheel firmly and shake it back and forth, up and down, to check for any looseness in the wheel bearing. If there is looseness, it indicates bearing damage.
13
0
Share

Why Do Car Ignition Coils Fail?

Car ignition coils fail due to insulation layer aging and breakdown or damage to the switching transistor. A large spark plug gap increases the load on the primary coil, leading to excessive heat and faster insulation aging. Conversely, a small spark plug gap results in higher discharge current in the secondary coil, also causing excessive heat and rapid insulation aging. Assembled ignition coils may have poor insulation material durability, high internal resistance leading to excessive heat, and lower-quality transistors, resulting in a shorter lifespan. The core components of the ignition system are the ignition coil and the switching device. Increasing the energy of the ignition coil enables the spark plug to generate sparks with sufficient energy, which is a fundamental requirement for the ignition system to adapt to modern engine operations. Typically, an ignition coil contains two sets of windings: the primary coil and the secondary coil.
18
1
Share

What does it mean when the steering system malfunction indicator light is on?

When the steering system malfunction indicator light is on, it indicates a fault in the power steering system. There are two specific scenarios: 1. If the light is yellow: It means the steering system is partially malfunctioning, and more force is required to turn the steering wheel. 2. If the light is red: It means the steering system has completely failed, and significant force is needed to turn the steering wheel. Here is additional information about the steering system: The automotive steering system (steering-system) is a series of devices used to change or maintain the direction of a vehicle's movement, whether forward or backward. Its function is to control the vehicle's direction according to the driver's intention. The steering system is crucial for driving safety, and along with the braking system, it is one of the two systems that must be given high priority for vehicle safety.
2
2
Share

Which country produces Peugeot?

Peugeot cars are produced in France. Here is more information about Peugeot: 1. Dongfeng Peugeot is a joint venture model produced by Dongfeng Motor Manufacturing Plant, which belongs to Chinese production: In October 2002, Dongfeng Motor Corporation and the French PSA Group, also known as Peugeot Citroën Group, signed an expanded cooperation joint venture contract. The two major groups joined forces to fully develop a new blueprint for introducing the Peugeot brand into China, and Dongfeng Peugeot was born. 2. Dongfeng Peugeot car models: Peugeot 2008, Peugeot 3008, Peugeot 408, Peugeot 508, Peugeot 308, Peugeot 308S, Peugeot 301, Peugeot 307; imported Peugeot car models include Peugeot 4008, Peugeot 308SW, Peugeot 207CC, Peugeot 308CC, Peugeot RCZ, Peugeot 5008. 3. Peugeot cars have the most romantic and unique appearance with a touch of elegance: they are suitable for a wide range of ages and occasions. However, Peugeot is relatively slow in updating its powertrain systems, but this means they are mature, reliable, durable, and require less maintenance.
9
2
Share

What to Do If a Vehicle Fails Emission Inspection?

Here are the methods to address a vehicle failing emission inspection: 1. Poor Fuel Quality: If low-quality fuel is frequently used, it can lead to excessive carbon deposits after combustion and may impair the performance of the exhaust purification system, reducing its lifespan and increasing pollutant emissions, resulting in failed tailpipe emissions. Therefore, before the annual inspection, it is advisable to fill up with high-quality gasoline and drive on the highway before testing. 2. Clogged or Poisoned Catalytic Converter: Frequent low-speed driving or the use of inferior fuel can cause the catalytic converter to clog or become poisoned and malfunction. In such cases, you can purchase professional cleaning agents to remove and clean the catalytic converter or drive at high speeds for a distance. High-speed driving is effective in cleaning the engine's fuel system and cylinders. Additionally, at high engine speeds, fuel burns more completely, helping to flush out dirt and impurities from the fuel system and remove carbon deposits from the valves, clearing blocked passages and achieving a cleaning effect. Additional Information: For non-commercial vehicles that fail emission inspections, the public security department will temporarily confiscate the vehicle's license until the issue is resolved and standards are met before allowing the vehicle back on the road. For commercial vehicles, the municipal transportation bureau will suspend their operational qualifications until the issue is resolved and standards are met before allowing them back into service. If a vehicle fails the emission inspection three times, it may face mandatory scrapping, which is an important point to note.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.