Why was Mobil 1 Silver removed from Tuhu?

Where is the power steering fluid location for the BMW 7 Series?

The power steering fluid reservoir for the BMW 7 Series is located in the engine compartment. First, open the car's hood, then locate the cap near the vehicle frame adjacent to the left intake pipe of the engine. Opening this cap allows you to refill the power steering fluid. Below is an introduction to the BMW 7 Series: 1. Interior: The interior highlights include the installation of a new 12.3-inch full LCD instrument panel and the latest iDrive 7.0 multimedia system. 2. Powertrain: It is equipped with an upgraded 2.0-liter turbocharged inline-four engine, a 3.0-liter turbocharged inline-six engine, and a 4.4-liter twin-turbocharged V8 engine, corresponding to the 730Li, 740Li, and 750Li models respectively, with maximum power outputs of 258 horsepower, 340 horsepower, and 530 horsepower.

18

5

Share

How to Remove the Rear Seat Cushion of a Kia K3?

Kia K3 rear seat cushion removal steps are as follows: 1. First, press the button under the rear seat of the Dongfeng Yueda Kia K3; 2. Remove the fixing screws of the Kia K3 rear seat; 3. Take off the rear seat cushion of the Kia K3; 4. Remove the fixing screws of the Kia K3 rear seat backrest; 5. The rear seat of the Dongfeng Yueda Kia K3 is now successfully removed. Note that the Kia K3 rear seat backrest has fixing screws located in the gap between the seat and the backrest, and a 12mm socket is required to remove the internal fixing screws.

14

1

Share

How to adjust the Jetta VS5 seat?

To adjust the Jetta VS5 seat, release the adjustment handle and slightly move the seat forward or backward until the seat locking mechanism engages securely. Below is relevant information about the Jetta VS5: 1. Introduction: The Jetta VS5 is a compact SUV under the FAW-Volkswagen Jetta brand. 2. Price: The manufacturer's suggested retail price ranges from 84,800 to 112,800 yuan. 3. Powertrain: It is equipped with an EA211 1.4T 110KW engine, paired with either an MQ250 manual transmission or an Aisin AQ250 six-speed automatic transmission. 4. Suspension: It features a front MacPherson independent suspension and a rear multi-link independent suspension.

8

0

Share

Precautions for Novice Drivers on Highways

Precautions for novice drivers on highways are as follows: Maintain a steady speed while driving: After passing the highway toll station, first drive on the acceleration lane and observe whether there are vehicles approaching from behind. Enter the main lane without affecting the normal traffic in the left lane. Maintain a steady speed and avoid getting too close to the vehicle in front. Refer to the distance markers to keep a reasonable gap. Generally, if the speed is 100Km/h, the distance should be 100m. Stay in one lane as much as possible: Avoid frequent lane changes on the highway, and do not suddenly decelerate or stop without warning in the driving lane. Do not drive side by side with other vehicles, stay in the overtaking lane for too long, or attempt to overtake from the emergency lane. Additionally, prepare in advance when exiting or merging lanes. Slow down and move to the right lane or deceleration lane 500m before the exit or merging point. Avoid sudden lane changes or emergency braking after passing the exit. Be decisive when overtaking: When deciding to overtake, check if there are vehicles approaching from the left rear and ensure there are no obstacles in the overtaking lane. Use the horn or lights to alert the vehicle being overtaken, especially when passing trucks or buses, and accelerate decisively. After overtaking, do not immediately return to the driving lane. Wait until you are 50m-100m away from the overtaken vehicle before signaling and returning to the lane. Exercise caution when driving at night: Use high beams when driving on the highway at night and pay attention to the taillights of vehicles ahead. Avoid driving while fatigued. In case of heavy fog at night, slow down and turn on the hazard lights. Overcome adverse weather conditions: Visibility is poorer in rainy weather, increasing the risk of accidents on highways. Slow down and watch for standing water on the road to prevent hydroplaning and loss of control. Avoid sudden braking and sharp steering. Maintain a distance twice as long as in clear weather. Use necessary warnings when stopping: If you need to stop temporarily due to a malfunction, turn on the right turn signal in advance to exit the driving lane and stop in the emergency lane or on the right shoulder. Never stop in the driving lane. Turn on the hazard lights and place a warning sign 150m behind the vehicle. Additionally: According to Article 64, Paragraph 1 of "Regulation No. 123," the first 12 months after a driver obtains a new license or adds a new vehicle category is considered the probationary period (i.e., 12 months from the "initial license date" on the license). If the probationary period is extended, it becomes 24 months from the "initial license date." Article 65, Paragraph 2 of "Regulation No. 123" states that a probationary driver must be accompanied by a driver with a corresponding or higher-level license held for at least three years when driving on highways. Failure to comply will result in fines.

16

3

Share

Where is the handbrake of BMW X1?

The BMW X1 is equipped with an electronic handbrake, which is located next to the gear lever. The electronic handbrake is mainly used for long-term braking after parking, similar to the traditional mechanical handbrake. The electronic handbrake is also known as the Electronic Parking Brake (EPB), and its button symbol in the vehicle is 'P'. Here is an introduction to the electronic handbrake: 1. The working principle of the electronic handbrake is the same as that of the traditional mechanical handbrake, both achieving parking brake control through the friction generated between the brake disc and the brake pads, except that the control method has changed from the previous mechanical handbrake to an electronic button. 2. The structural principle of the electronic handbrake: Currently, the electronic parking brake technology applied in cars is mainly the caliper-integrated electronic parking brake system, which replaces traditional parking brake handles, mechanical levers, and cables with electronic buttons and motor components. 3. When parking, after the driver operates the electronic button of the electronic parking brake system, the electronic control unit will control the motor integrated in the left and right brake calipers to act, driving the brake caliper piston to rotate and generate mechanical clamping force to complete the parking.

6

3

Share

What are the reasons for the engine fault light to illuminate?

There are several reasons why the engine fault light may illuminate: 1. Poor engine combustion state: Oxygen sensors are installed on the engine to monitor the combustion state. If the combustion state is poor, not only will the fault light illuminate, but it will also lead to fuel wastage and excessive engine wear. 2. Dirty engine cylinders with carbon deposits: Over time, carbon deposits inevitably accumulate inside the engine. These deposits can alter the engine's design parameters and, due to their unstable nature and heat retention, can cause irregular ignition, leading to engine knocking.

12

3

Share

Why was Mobil 1 Silver removed from Tuhu?

Where is the power steering fluid location for the BMW 7 Series?

How to Remove the Rear Seat Cushion of a Kia K3?

How to adjust the Jetta VS5 seat?

Precautions for Novice Drivers on Highways

Where is the handbrake of BMW X1?

What are the reasons for the engine fault light to illuminate?

What is the displacement of the Focus RS?

What is the minimum ground clearance of the Cadillac CT5?

How to activate the one-touch window lift function for Roewe i5?

Where is the license plate Meng F from?