Why Should You Avoid Flood-Damaged Cars in Zhengzhou?

1 Answers
AngelaLynn
07/29/25 11:08pm
Flood-damaged cars should be avoided because water has entered the vehicle compartment, submerging the chassis, floor, and even the engine. The damp interior is prone to mold and odors, while wiring harnesses and electronic components are susceptible to corrosion. Even after repairs, these vehicles are likely to develop faults later on, and untreated metal parts inside the car can oxidize and corrode. Below is an introduction to flood-damaged cars: Introduction: Flood-damaged cars refer to vehicles that have been submerged in water, typically meaning the engine and transmission have been soaked, with water levels exceeding the wheels and seats, and prolonged contact between the vehicle's underbody components and water. Such cars pose significant risks, as the electrical circuits are prone to short circuits and fires. Hidden Risks: While flood-damaged cars can be repaired to some extent, even after repairs, they still carry serious hidden dangers. The longer the immersion time, the higher the likelihood of faults occurring. This is similar to a watch falling into water—even if it is disassembled and dried, the watch may still malfunction and cannot be completely repaired. Handling: If a vehicle is submerged in water, as long as the engine is not flooded, repairs such as replacing parts or fixing circuits are covered under the auto damage insurance. Even if heavy rain submerges the entire car, resulting in a total loss, the insurance company can compensate for the total loss.
Was this review help?
19
3
Share
More Forum Discussions

Where is the cruise control button on the Sagitar?

The cruise control area is generally located behind the steering wheel or integrated into the multifunction steering wheel, with two main types of control switches: lever-type and button-type. Below is a detailed introduction to the cruise control system: 1. Function: The cruise control system, abbreviated as CCS, automatically maintains the vehicle speed once the driver reaches the desired speed, eliminating the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed. Using this device during long highway drives reduces driver fatigue by eliminating the need to control the accelerator pedal, while also minimizing unnecessary speed changes, which can save fuel. 2. Usage conditions: The cruise control system is not suitable for all situations and locations. In principle, it should be used on highways or fully enclosed roads, as complex road conditions on non-enclosed roads are not conducive to traffic safety.
10
2
Share

Do Scooters Have a Clutch?

Scooter motorcycles have a clutch. Additional information: Working principle: When the pedal is pressed, the mechanism applies pressure to the spring, causing the outer edge of the spring to lift and the friction plate to disengage from the pressure plate. At this point, the friction plate and the flywheel are no longer connected, so even if the engine continues to operate, the power will not be transmitted to the gearbox and wheels. This allows the rider to shift gears or stop without causing the engine to stall. When the crankshaft speed is low, the two friction plates do not contact the outer shell, preventing power transmission. When the crankshaft speed is high, centrifugal force causes the friction plates to move outward and engage with the outer shell, enabling power transmission.
2
4
Share

What are the reasons for the sudden increase in fuel consumption of the Kia K3?

There are several reasons for increased fuel consumption: 1. Weak high-voltage spark in the ignition system; 2. Insufficient fuel supply in the fuel system or poor atomization of the fuel injector; 3. Insufficient cylinder pressure in the engine; 4. Poor quality of the fuel used. 5. The vehicle's single-trip distance is too short, the average speed is relatively low, and braking is frequent, especially in urban stop-and-go traffic, making it impossible to reduce fuel consumption. 6. Additionally, the vehicle's load and whether the air conditioning is used can also affect fuel consumption. Overall, winter fuel consumption is about 1-2L higher than in summer under the same conditions, which is within the normal range.
9
5
Share

What Causes the Reversing Camera on a Land Rover Range Rover to Not Display?

There are primarily three reasons why the reversing camera on a Land Rover Range Rover may fail to display. First, it could be due to a faulty reverse contact switch, which might be caused by poor contact or a loose spring. Second, the reverse sensor might be obstructed by an obstacle, or the camera itself may be malfunctioning, in which case replacing the camera should resolve the issue. If neither of these is the problem, then it's possible there's a fault in the wiring between the components. The reversing camera system consists of three main parts: the camera device, the control unit, and the display. The reversing camera system in the Land Rover Range Rover is composed of a wide-angle camera installed at the rear, a control unit responsible for signal processing and transmission, the display, the front information display and operation control unit, the TV tuner, and the CAN data bus, among other components.
9
2
Share

Where is the cigarette lighter in the Nissan Sylphy?

The cigarette lighter in the Nissan Sylphy is located on the center console panel. Here are the specific details about the Sylphy: 1. Vehicle Positioning: The Sylphy is a compact car under the Nissan brand, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. 2. Powertrain: The Sylphy is equipped with a 1.6L naturally aspirated engine across all models. There are 4 variants of the Sylphy, featuring 1.6L displacement in total, with 2 transmission options: manual and continuously variable transmission (CVT). The engine delivers a maximum power of 93.0kW, maximum horsepower of 126PS, and maximum torque of 168.0N·m. 3. Suspension: The Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension.
12
3
Share

How to Replace the Battery in a Volkswagen Magotan Remote Control?

The following steps outline the battery replacement process for the Magotan car key: 1. Push the locking mechanism of the emergency key to remove the mechanical key. 2. Open the decorative panel along the gap, apply slight outward force to remove the panel after opening the gap. 3. Use a small screwdriver to remove the old battery. 4. When installing the new battery, pay attention to the polarity direction of the battery and choose a battery with the same voltage. 5. After installing the battery, reattach the decorative panel. 6. Reinstall the mechanical key. 7. The battery replacement is now complete. 8. When the battery voltage is insufficient or depleted, the vehicle dashboard will display a message: 'Remote key not detected,' prompting the driver to check the key's battery level.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.