Why Should There Be No One in the Car During Tire Inflation?

1 Answers
EmiliaMarie
07/29/25 4:43pm
Here are the specific reasons why there should be no one in the car during tire inflation: 1. Affects Pressure Accuracy: Having passengers in the car adds extra load, which can affect the accuracy of the tire pressure during inflation. 2. Safety Considerations: For safety reasons, passengers should not be in the car while inflating the tires, as they could be injured in case of a tire blowout or other accidents. Below are some precautions for tire inflation: 1. Safety During Inflation: Always use a pressure gauge to check the pressure to avoid over-inflation, which could cause the tire to burst. 2. Inflate After Cooling Down: After stopping the vehicle, wait for the tires to cool down before inflating, as driving increases tire temperature, affecting the pressure. 3. Check the Valve: If the valve and valve core are not properly aligned or have defects, it may be difficult to inflate or measure the pressure.
Was this review help?
5
5
Share
More Forum Discussions

What are the penalties for making a U-turn where it is prohibited?

Penalties for making a U-turn where it is prohibited are as follows: 1. Making a U-turn on a road section with a solid center line is considered a traffic violation of disobeying prohibited markings, resulting in a fine of 100 yuan and 3 demerit points. 2. Making a U-turn at locations such as crosswalks or bridges is considered a traffic violation of making a U-turn at a prohibited location, resulting in a fine of 100 yuan. 3. Making a U-turn at an intersection without a no-left-turn sign when the traffic light is red is considered a traffic violation of disobeying traffic signals, resulting in a fine of 200 yuan and 6 demerit points. 4. Making a U-turn on a highway is considered a traffic violation of crossing the central divider on a highway to make an illegal U-turn, resulting in a fine of 200 yuan and 12 demerit points.
11
1
Share

How to adjust the date and time on a Cruze?

Here is the method to adjust the date on a Cruze: 1. Press the one-touch start button on the vehicle's center console to power up the dashboard. 2. Press the SET button on the left side of the steering wheel. 3. Use the up and down option toggle buttons on the right side of the steering wheel to adjust the vehicle time. 4. Press the OK button on the steering wheel to confirm. Here is some related information about the Cruze: 1. The Cruze has a length, width, and height of 4666mm, 1807mm, and 1460mm respectively, with a wheelbase of 2700mm. It is equipped with a 6-speed manual transmission and has a top speed of 185 km/h. 2. The vehicle's fuel tank capacity is 52L, with a maximum horsepower of 114 and a maximum torque of 146 Nm. The tire specification is 205/55R16.
18
3
Share

How many hours constitute fatigued driving?

Fatigued driving is defined as driving for more than 4 hours without stopping for a rest. The details of fatigued driving are as follows: Introduction to Fatigued Driving: Fatigued driving refers to operating a vehicle while the driver's body is in a prolonged state of fatigue. It is a hidden danger that can lead to various traffic accidents. For the act of driving while excessively fatigued, the "Road Traffic Safety Law" authorizes provinces, cities, and autonomous regions to establish penalties within a fine range of up to 200 yuan. Penalties for Fatigued Driving: Article 62 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates: When driving a motor vehicle, the following behaviors are prohibited—continuously driving a medium-sized or larger passenger vehicle or a hazardous materials transport vehicle for more than 4 hours without stopping for a rest or stopping for less than 20 minutes, which will result in a 12-point deduction.
18
1
Share

What does ASR mean in a car?

ASR in cars refers to the Traction Control System, whose full name is Acceleration-Slip-Regulation, also known as TCS or TRC. The function of the Traction Control System is to enable the car to obtain the best traction under various driving conditions. Below is the principle of the Traction Control System: 1. The Traction Control System mainly uses the engine ignition timing, transmission gear position, and fuel supply system to control the situation of driving wheel slip. When ASR detects wheel slip, it first changes the engine ignition timing through the engine control computer, reduces engine torque output, or applies brakes to the slipping wheel to prevent it from slipping. In cases of severe slipping, it further controls the engine fuel supply system. 2. The difference between ASR and ABS: ABS uses sensors to detect when a tire is about to lock up, then reduces the braking force on that wheel to prevent locking. It quickly changes the braking force to keep the wheel on the verge of locking. In contrast, ASR mainly uses engine ignition timing, transmission gear position, and fuel supply system to control driving wheel slip.
2
2
Share

What car is the Rolls-Royce in GTA5?

In GTA5, the Rolls-Royce is called the Windsor, and its real-life counterpart is the Rolls-Royce Phantom. The Chinese name for GTA5 is "Grand Theft Auto V". Below is some related information about the Phantom: 1. The Phantom is a large luxury sedan under the Rolls-Royce brand, equipped with a 6.7-liter V12 twin-turbocharged engine across all models. The engine code is N74B68A, delivering 571 horsepower and a maximum torque of 900 Nm. It reaches peak torque at 1,700 rpm and maximum power at 5,000 rpm. This engine features direct fuel injection and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). 2. The Rolls-Royce Phantom uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The double-wishbone suspension helps reduce body roll and prevents brake dive, enhancing ride comfort. The multi-link suspension improves wheel contact with the ground, further enhancing the car's comfort.
11
1
Share

What causes water ingress after modifying the Santa Fe fog lights?

The main reason for water ingress after modifying the Santa Fe fog lights is the poor quality of the fog lights. Here are some details about fog lights: 1. Fog lights are divided into front fog lights and rear fog lights, with differences in color, typically yellow for the front and red for the rear. 2. Their characteristic is that the light has strong penetration and does not produce diffuse reflection due to fog, which can alert other vehicles and improve visibility during rainy or foggy weather. Additional content: The method for replacing Santa Fe fog lights is as follows: 1. Before installation, ensure the car is parked and turned off, preferably on a road with a slight slope, and engage the handbrake. 2. Open the engine hood, disconnect the fog light switch, unplug the fog light power supply, and disconnect its power system. 3. After removing the washers, screws, and nuts, the fog light cover can be taken off, and the old light can be removed. 4. Install the new fog light; when correctly installed, the fog light should fit snugly into the mounting position. Place washers on the screws, then tighten the nuts with a ratchet wrench or adjustable wrench to secure the fog light. Finally, plug in the fog light power supply.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.