Why Should the Steering Wheel Be Straightened When Parking?

1 Answers
SamanthaDella
07/29/25 6:06am
Parking with the steering wheel straightened is necessary for the following reasons: 1. It prevents accelerated aging of the steering system; 2. It avoids causing severe damage to the suspension system; 3. It ensures even tire pressure distribution. The function of the steering wheel is to convert the force applied by the driver on its edge into torque, which is then transmitted to the steering shaft. It primarily consists of a frame, foam, and the driver's airbag. Precautions for using the steering wheel include: 1. Never remove both hands from the steering wheel simultaneously; 2. Avoid placing hands too close together on the steering wheel; 3. Match the steering wheel's turning range and speed to the vehicle's turning angle and speed; 4. Do not grip the steering wheel from the inner side; 5. Avoid turning the steering wheel when the vehicle is stationary to prevent damage to the steering system and tire wear.
Was this review help?
4
2
Share
More Forum Discussions

Does the Civic have auto-folding side mirrors?

The Civic does not have auto-folding side mirrors; the driver must fold them manually. Some Civic models are equipped with heated side mirrors and integrated turn signal indicators on the side mirrors. If you want auto-folding functionality, it can be added as an aftermarket modification. The Civic has dimensions of 4517mm in length, 1799mm in width, and 1434mm in height, with a wheelbase of 2700mm. The body style is a 5-door, 5-seat hatchback, and it comes with a CVT transmission. The Civic features front-wheel drive, with a MacPherson strut front suspension and a multi-link rear suspension. The steering is electrically assisted, and the body structure is unibody.
2
2
Share

What is the solution for bubbles appearing on car paint protection film?

The solution for bubbles appearing on car paint protection film is to wait for about two days, and the bubbles will naturally evaporate. Below is an analysis of the reasons for bubble formation: 1. Installation issues: The car surface was not cleaned properly during installation, or the installation environment had wind carrying dust, which adhered to the car body. Additionally, improper techniques by the installation technician, incorrect use of tools, and failure to remove moisture bubbles can all lead to bubble formation. 2. Product issues: Low-quality paint protection films have poor quality and can release gases under sunlight, leading to bubbles and wrinkles. They are also prone to adhesive failure, which can result in hollow bubbles.
19
0
Share

What are the causes of insufficient vehicle power?

Automotive power deficiency is mainly caused by abnormal fuel system or transmission failure. Below are detailed explanations and solutions: 1. Abnormal fuel system: Insufficient fuel pressure, check high-pressure fuel pump, carbon deposits in fuel lines, spark plugs, oxygen sensor, intake valves. For vehicles with relatively low mileage, focus on checking carbon deposits and spark plugs, as most issues are related to carbon buildup in fuel lines. Solution: Regular cleaning is required. 2. Transmission failure: Perform computer diagnostics to check for error codes or adjustment needs. Sometimes improper transmission fluid usage can also cause problems. The safest approach is to use the original manufacturer's transmission fluid. However, if tests show no issues, other transmission fluids can also be used. Solution: Use the original manufacturer's transmission fluid.
13
4
Share

How to Clean a Car Cover?

To clean a car cover, you can either cover the car with the car cover and wipe it with a damp towel or wash it directly with water. Here is some relevant information about car covers: 1. Fold the car cover neatly: After each use, fold the car cover neatly and avoid crumpling it into a ball, as this can create small wrinkles that may scratch your car's paint. 2. Functions of a car cover: Made of high-density material, it effectively blocks dust from entering the car's interior and engine compartment; its silver-gray high-reflectivity surface effectively blocks UV rays from the sun, protecting the car's exterior and interior from radiation and providing a certain level of protection; waterproof design effectively prevents rainwater from entering the car body, keeping the car clean and tidy.
13
3
Share

How to Manually Release a Failed BMW Parking Brake?

If power supply is restored after emergency operation, pressing the parking brake button three times can release it. Here is a detailed introduction about the car brake: 1. Meaning: The parking brake, usually refers to the manual brake installed on motor vehicles, commonly known as the handbrake, used to stabilize the vehicle after it is parked, preventing accidents caused by the vehicle rolling on sloping roads. 2. Function: The role of the parking brake is to stabilize the vehicle after it is parked, avoiding accidents due to rolling on inclined surfaces. 3. Others: Common handbrakes are generally placed at the position where the driver's right hand hangs down, making them easy to use. Some automatic transmission models on the market have a foot brake with the same function as the handbrake designed outside the driver's left foot, and some advanced models are also equipped with an electronic parking brake system.
3
4
Share

What SUV models does Toyota have?

Toyota's SUV models include the CHR, RAV4, Wildlander, Highlander, Prado, and Izoa. The CHR is a 5-door, 5-seat SUV with dimensions of 4390mm in length, 1795mm in width, and 1565mm in height. The vehicle warranty is 3 years or 100,000 kilometers. The RAV4 is a compact SUV with dimensions of 4600mm in length, 1855mm in width, and 1680mm in height, and a wheelbase of 2690mm. It comes with a 3-year or 100,000-kilometer warranty and is equipped with a CVT transmission. The Wildlander is a compact 5-door, 5-seat SUV that meets the China VI emission standards. It measures 4665mm in length, 1855mm in width, and 1680mm in height, with a trunk capacity of 580 liters. The Prado is a mid-to-large SUV that meets the China V emission standards. It has dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, and is equipped with a 6-speed automatic transmission. The Highlander is a mid-size SUV with dimensions of 4890mm in length, 1925mm in width, and 1720mm in height, and a wheelbase of 2790mm. The Izoa is a small 5-door, 5-seat SUV with dimensions of 4390mm in length, 1795mm in width, and 1565mm in height, and comes with a 3-year or 100,000-kilometer warranty.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.