Why Should Downhill Vehicles Yield to Uphill Vehicles?

1 Answers
StLucia
07/28/25 7:24pm
Which side should yield when vehicles meet on a slope depends on the actual situation. Article 48 of the "Regulations for the Implementation of the Road Traffic Safety Law" states: On narrow slopes, the vehicle going uphill has the right of way; however, if the downhill vehicle has already reached the middle of the slope while the uphill vehicle has not yet started ascending, the downhill vehicle has the right of way. On roads without central barriers or center lines, the following right-of-way rules apply when encountering oncoming traffic: 1. Obstacle sections: On sections with obstacles, the vehicle without obstacles has the right of way; but if the vehicle with obstacles has already entered the obstacle section while the vehicle without obstacles has not yet entered, the vehicle with obstacles has the right of way. 2. Mountain roads: On narrow mountain roads, the vehicle not next to the mountain has the right of way. 3. Slopes: On narrow slopes, the vehicle going uphill has the right of way; but if the downhill vehicle has already reached the middle of the slope while the uphill vehicle has not yet started ascending, the downhill vehicle has the right of way. 4. Pedestrian crossings: Regarding yielding to pedestrians, when motor vehicles approach a pedestrian crossing, they should slow down; if pedestrians are crossing, the vehicle must stop and yield. When motor vehicles are on roads without traffic signals and encounter pedestrians crossing, they should give way.
Was this review help?
13
2
Share
More Forum Discussions

What is the meaning of automotive metallic paint?

Metallic paint is created by mixing metal powder into the paint, which makes the painted metal surfaces appear more shiny and attractive. Viewed from different angles, due to light refraction, the color and even the car's contours will change, giving the vehicle's appearance a richer look. Automotive metallic paint is a high-end car coating made from metal powders such as copper and aluminum. It features a metallic luster texture that enhances the paint film's grade and fully highlights a noble, elegant temperament. There are generally two types: water-based and solvent-based. Since metal powders are unstable in water and air, often undergoing chemical reactions and deterioration, their surfaces require special treatment, making the metal powders used in water-based paints expensive and limited in application. Currently, it is primarily solvent-based. With the advancement of life and the continuous development of the automotive industry, the production of safe and environmentally friendly automotive paints can play a significant role in developing new paint markets. Metallic paint is harder than ordinary paint, making the car body less prone to scratches, and it can also showcase the beauty of the body's level. For those without a garage who can only park in open parking lots, this is a great boon.
10
1
Share

What is the function of a car air conditioning filter?

The main functions of a car air conditioning filter are: 1. Provide fresh air. It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the passenger compartment, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene. It keeps the air in the passenger compartment clean and free from bacterial growth, creating a healthy environment; it effectively separates solid impurities such as dust, core powder, and grinding particles from the air; it efficiently intercepts pollen, ensuring that passengers do not suffer allergic reactions that could affect driving safety. 3. Adsorb harmful substances. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; it has strong and durable moisture adsorption capabilities. 4. Filter solid impurities. The car air conditioning filter fits tightly into the housing, ensuring that unfiltered air does not enter the cabin. It separates solid impurities such as dust, pollen, and grinding particles from the air.
18
1
Share

What to Do If Your Car Fails the Environmental Protection Test?

If your vehicle fails the environmental protection test three times, the first consideration should be whether there is an issue with the catalytic converter. Car exhaust contains many pollutants, with the primary ones being carbon monoxide, hydrocarbons, and nitrogen oxides. Under normal circumstances, the catalytic converter processes these through oxidation and reduction, converting them into harmless carbon dioxide, nitrogen, and water, thereby achieving purification. The catalytic converter is called a "three-way" catalytic converter because it contains three precious metals: platinum (Pt), rhodium (Rh), and palladium (Pd), hence the name "three-way." Solution: Before the test, drive on the highway for a while to allow the catalytic converter to reach its optimal operating temperature before testing. The most important point is not to turn off the engine before the test, as this keeps the catalytic converter at a certain temperature. If this still doesn't work, directly clean the catalytic converter and then retest to see if it passes. If it still fails, consider the following possible reasons: 1. The oxygen sensor is faulty. Solution: Replace the oxygen sensor. 2. The air filter is problematic. Solution: Replace the air filter. 3. The fuel is the issue. Solution: Add half a tank of E10 ethanol gasoline. Ethanol has a high oxygen content, which aids combustion. If none of these methods work, there is basically no other solution.
9
4
Share

What is the one-touch window operation for the Verano?

Operation method for the Verano's one-touch windows: 1. To open the window, press the switch to the first position and hold until the window moves to the desired position, then press slightly harder to the second position, and the window will automatically lower; 2. To close the window, pull the switch to the first position and hold until the window moves to the desired position, then briefly pull the switch to the second position, and the window will automatically close. The Buick Verano is a new compact model from Buick, positioned above the Excelle. In terms of body dimensions, it measures 4718mm in length, 1802mm in width, 1466mm in height, with a wheelbase of 2700mm.
1
3
Share

Which vehicles are included in the rural auto promotion program?

The rural auto promotion program generally does not include models such as sedans, SUVs, or MPVs. Only minibuses, light trucks, and motorcycles are covered. The rural auto promotion is a pro-farmer policy proposed by the State Council in 2009, which not only meets the needs of benefiting and strengthening agriculture but also serves as an important measure to stimulate consumption and production. The rural auto promotion not only provides farmers with rural household registration preferential purchase subsidies and tax reductions but also stimulates economic consumption to a certain extent and revitalizes the automotive industry. For example, the Chengdu Wanyou is a vehicle with high ground clearance, low fuel consumption, high quality, low price, and strong load capacity, making it suitable for regional markets. In terms of engine usage, this vehicle is equipped with the 4L88 engine, a brand-new product jointly developed by Changchai and Great Wall, with a displacement of 2.8 liters and a power output of 65kW. It also comes with a PM injection pump and Bosch P injectors from Germany. The engine's fuel consumption rate is significantly reduced, with fuel consumption below 6 liters per 100 kilometers, showcasing outstanding fuel-saving performance. Chengdu Daxingda Auto: Excellent fuel-saving performance, leading in vehicle length and space volume among similar models. Utilizing the latest technology, it achieves excellent fuel-saving performance with a fuel consumption of only 6.25-6.5L per 100 kilometers. Meanwhile, the vehicle length is 3.868 meters, width is 1.528 meters, and height is 1.848 meters.
19
0
Share

How to Smooth Out After Applying Touch-Up Paint Pen?

Methods for smoothing out after applying a touch-up paint pen are as follows: 1. Smoothing with wet sandpaper. You can use 2000-grit wet sandpaper for sanding. After the touch-up paint has dried, soak the wet sandpaper in soapy water for 20-30 minutes to make it softer, then sand the uneven paint surface until the thickness of the touch-up matches that of the original factory paint. 2. Smoothing with toothpaste. Toothpaste can serve as a mild abrasive. First, squeeze toothpaste onto a soft, clean towel or sponge, then gently rub the uneven areas until the touch-up paint thickness is level with the original factory paint. 3. For better results, you can also use polishing compound for finishing.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.