Why No One Installs Car Bumper Guards?

What does car air suspension mean?

The suspension system refers to all the force-transmitting connection devices between the car frame and the axle or wheels. Its function is to transmit forces and torques acting between the wheels and the frame, buffer the impact force transmitted from uneven road surfaces to the frame or body, and dampen the resulting vibrations to ensure smooth driving. The following is relevant content introduction: 1. The working principle of air suspension is to use an air compressor to form compressed air and deliver it to the air chambers of the springs and shock absorbers, thereby changing the vehicle's height. Level height sensors are installed near the front and rear wheels. Based on the output signals from these sensors, the air suspension control unit determines changes in vehicle height and then controls the compressor and exhaust valve to compress or extend the springs, achieving shock absorption. 2. Current air suspension systems typically use small electric motors or the engine to drive the air compressor to pre-compress air into the storage tank, eliminating the need for compression time when suspension adjustment is required.

17

5

Share

How to Steer When a Car Skids?

Here are the methods for steering when a vehicle skids: 1. If the front wheels skid, turn the steering wheel in the opposite direction of the skid; if the rear wheels skid, turn the steering wheel in the same direction as the skid. 2. If the front wheels skid to the left, causing the front of the car to swing left, turn the steering wheel to the right to straighten the car. Conversely, if the rear wheels skid to the left, causing the rear to swing left (equivalent to the front swinging right), turn the steering wheel to the left to straighten the car. 3. The result of skidding is that the direction of the vehicle's acceleration does not align with the car's axis, making it impossible to effectively control the car's power. Correcting this involves changing the direction of the power to align the acceleration direction with the vehicle's axis, thereby regaining control over the car's movement direction.

20

3

Share

How to Read Tire Specifications and Models?

Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width, and the latter denotes the rim diameter in inches. The international standard tire code expresses the section width and aspect ratio as a percentage in millimeters. This is followed by: the tire type code, rim diameter (in inches), load index (permissible load capacity code), and permissible speed code. Additional information: 1. Speed rating: Tires also feature a letter indicating the speed rating, which represents the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z denote certified speed ratings ranging from 4.8 km/h to 300 km/h. 2. Tire model specifications: Taking a 195/55R15-85 tire as an example, 195 represents the section width, 55 is the aspect ratio, and 15 is the rim diameter. Notably, the load index "85" indicates that a single tire can bear a maximum weight of 515 kg, so four tires would total 4*515=2060 kg.

2

0

Share

How to Adjust the Headlight Height of the Lynk & Co 03?

The headlight height adjustment for the Lynk & Co 03 involves the following steps: 1. Turn on the high beams and stand in front of the headlights with your feet as close to the headlights as possible. Observe where the high beam shines on your feet, identifying the brightest spot (the light center) as the focal point and remember its position. 2. Then, move straight to a wall without deviating and mark the position of the light center on the wall based on its location on your feet. 3. Use a screwdriver to rotate the adjustment gear of the headlight, ensuring the light center aligns with the marked position on the wall, with the vertical distance not exceeding 10 cm. 4. Adjusting vertically will show obvious movement of the light center, while adjusting horizontally may not be as noticeable. If the light center doesn't move horizontally, don't worry—keep turning the screwdriver until the light center aligns with the marked position on the wall.

5

2

Share

How to Get a Motorcycle D License?

First, find a motorcycle driving school, undergo a physical examination, pay the fees, and after completing the training, you can take the test. The motorcycle license test, similar to the car license test, consists of four subjects. Subjects 1 and 4 are about driving civilization tests, while Subjects 2 and 3 are practical tests. All four test subjects are very simple, and with dedicated study, you can complete the test in one day and receive your license in a few days. Benefits of a Motorcycle D License: 1. Broader driving scope: As a proof of driving skills, it allows you to drive all types of motorcycles defined by the license, making the D license more versatile. 2. Minimal cost difference: The cost difference between obtaining a D license and an E license is not significant, and the time required is the same. Following the principle of 'the more skills, the better,' it's advisable to get the D license. 3. Similar test duration: The content difference between the D and E license tests is not substantial, and the process is relatively easy, making the D license a more suitable choice.

12

2

Share

What is the actual fuel consumption of the Land Cruiser 4.0?

The actual fuel consumption of the Land Cruiser 4.0 is 16L/100KM. Factors affecting vehicle fuel consumption are as follows: 1. When tire pressure is too low or the tread is severely worn, the contact area between the tire and the road surface increases, friction increases, rolling resistance rises, leading to higher fuel consumption. 2. Driving style affects vehicle fuel consumption. Smooth starts and linear acceleration are more fuel-efficient, while sudden acceleration, frequent braking, frequent starts, and revving the engine unnecessarily consume more fuel. 3. Poor quality engine oil can increase vehicle fuel consumption. 4. Severe carbon buildup in the intake and exhaust systems, fuel lines, injectors, and throttle body, as well as faults in the catalytic converter, sensors, or even spark plugs, can lead to fuel wastage and increased consumption.

12

2

Share

Why No One Installs Car Bumper Guards?

What does car air suspension mean?

How to Steer When a Car Skids?

How to Read Tire Specifications and Models?

How to Adjust the Headlight Height of the Lynk & Co 03?

How to Get a Motorcycle D License?

What is the actual fuel consumption of the Land Cruiser 4.0?

What is the Principle of the Tire Pressure Monitoring System?

How to Match the Throttle Body of an Audi A4?

Can't find Bluetooth on Mercedes-Benz E-Class?

Can a Car Run Continuously on the Highway in Hot Weather?