Why Many People Choose Not to Install Dash Cams

1 Answers
OTessa
07/30/25 3:33am
Here are the reasons why many car owners choose not to install dash cams: 1. Dash cams: They can record the driving process outside the car, but they can also record private information inside the car, including some whispered conversations. 2. Some larger dash cams: When mounted on the windshield, they can easily obstruct the driver's view. 3. Some high-end dash cams: Their designs are too flashy and conspicuous, making them easy targets for thieves who might break the window to steal them, resulting in significant losses. 4. Most dash cams have built-in batteries: If the dash cam is exposed to prolonged sunlight or has poor-quality built-in batteries, it can easily get damaged, posing safety hazards.
Was this review help?
10
2
Share
More Forum Discussions

How Often Should the Spark Plugs of Highlander 2.0T Be Replaced?

The spark plugs of Highlander 2.0T should be replaced around 60,000 kilometers. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers, but it may vary depending on the brand and engine. It is recommended to follow the user manual. The following standards can be referred to for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check if there are any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them. Install the removed high-voltage distributor wires according to the firing order, and then snap the cover back on.
16
2
Share

How long does it take to charge the Han DM?

The Han DM takes about three to four hours to fully charge, providing a pure electric range of 80 kilometers. Below is some related information about BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a team of just over 20 people. By 2003, it had grown into the world's second-largest producer of rechargeable batteries and established BYD Auto in the same year. Starting as a battery manufacturer, BYD's entry into automobile production was initially seen as an 'outsider' move. However, leveraging its strong reputation for 'independent intellectual property rights' and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to a development strategy of independent R&D, production, and branding, aiming to create truly affordable and high-quality vehicles for the masses. The product designs incorporate advanced international trends while aligning with the aesthetic preferences of Chinese culture.
15
1
Share

Why can't the Haval H4 connect to the internet?

Haval H4's inability to connect to the internet may be due to poor network signal. Here is some relevant information about the Haval H4: 1. Introduction: The Haval H4 is positioned as a high-energy intelligent connected SUV, a compact SUV launched by the Haval brand targeting young customer groups, with a total of 9 models featuring 1.5T+6MT/7DCT. 2. Model Configuration: In terms of configuration, the high-end Haval H4 models are equipped with LED headlights, 360-degree surround view, 8 radar probes, 12.3-inch full-color digital instrument panel, 9-inch LCD display, panoramic sunroof, 6-way electric adjustable driver's seat, leather seats, and other practical configurations. The Haval H4 LeXiang version is equipped with the Haval intelligent connectivity system, featuring a card-style UI interface design for convenient operation, optimized and upgraded voice control with faster response and higher recognition rate; it supports online music, online navigation, online radio, etc.
4
1
Share

What is the full load weight of a heavy-duty fire truck?

Heavy-duty fire trucks have a full load weight of approximately 11.6 tons. Below is relevant information about fire trucks: 1. Requirements for fire truck access lanes: According to national regulations, newly constructed buildings should reserve dedicated fire lanes to ensure unobstructed evacuation routes, emergency exits, and fire truck access. Roads within blocks should accommodate fire truck passage, with the distance between road centerlines preferably not exceeding 160.0m. When a building's street-facing length exceeds 150.0m or its total length exceeds 220.0m, a fire truck lane passing through the building should be provided. When this is genuinely difficult, a circular fire lane should be established. For buildings with enclosed courtyards or atriums where the short side exceeds 24.0m, a fire truck access lane into the courtyard or atrium should preferably be provided. 2. Supplementary regulations: When the gradient between a site's vehicle lane and a city road is significant, a buffer section should be installed without occupying city road space; in exceptionally difficult terrain with steep gradients, road longitudinal gradients should not exceed 11%, with gradient lengths not surpassing 100m, and road surfaces should have anti-slip measures.
6
3
Share

Reasons for Squeaking Noise When Pressing the Front Shock Absorber?

Front shock absorber squeaking noise when pressed can be caused by the following reasons: Shock absorber malfunction: This is due to the shock absorber colliding with the leaf spring, frame, or axle, damaged or detached rubber pads, deformation of the shock absorber dust cover, or insufficient fluid. Shock absorber top rubber bushing breakage: This indicates that the noise is caused by the front lower control arm bushing or a broken shock absorber top rubber bushing, leading to the squeaking sound from the front shock absorber. Function of the shock absorber: In the car suspension system, the shock absorber always works in conjunction with the spring. When one corner of the car body is pressed down, it is actually the spring that is compressed, while the corresponding control arm swings. When the car body is released, the spring force causes the body to rebound, and the shock absorber dampens this rebound, helping the car body to stabilize after the rebound.
19
2
Share

How often should the transmission fluid of a Corolla Hybrid be changed?

It is generally recommended to change the transmission fluid of a Corolla Hybrid every 3 years or approximately 60,000 kilometers. The replacement cycle varies for different vehicle models. Below are the replacement cycles for transmission fluid: Manual Transmission: The manual transmission fluid is generally recommended to be changed every 3 years or approximately 100,000 kilometers. Automatic Transmission: The automatic transmission fluid is generally recommended to be changed every 2 years or approximately 40,000 kilometers. Continuously Variable Transmission (CVT): The CVT fluid is generally recommended to be changed every 2 years or approximately 60,000 kilometers. The methods for changing transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid and then refill with new fluid. Remove the transmission oil pan directly to drain the old fluid and refill with new fluid: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to change the automatic transmission fluid: A smart circulation machine can perform dynamic fluid replacement, filtering and cleaning sludge and impurities inside the automatic transmission.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.