Why Keep Lightly Pressing the Brake at Red Lights?

1 Answers
Camilla
07/24/25 11:55pm
The reasons for keeping the brake lightly pressed at red lights are as follows: 1. Prevent Rolling: For automatic transmission vehicles, rolling is less likely to occur. However, for manual transmission vehicles, when the light changes from red to green, operational errors can easily cause the vehicle to roll forward or backward. If the driver fails to press the brake in time, it may lead to a "close encounter" with the vehicle in front, causing unnecessary traffic congestion and potential injuries. Keeping the brake lightly pressed can effectively prevent rolling, as pressing the brake fully will immobilize the vehicle. 2. Maintain Vehicle Stability: Frequent gear shifting increases operational difficulty and can lead to vehicle instability, causing abnormal noises and vibrations that affect the riding experience. Lightly pressing the brake with the right foot avoids these issues and helps maintain vehicle stability. 3. Save Time: At red lights, most novice drivers park by "shifting to neutral + pulling the handbrake." While this method is not wrong, when the light turns green, the driver needs to shift gears and release the handbrake before starting the vehicle, which is time-consuming. Some drivers might even forget to release the handbrake, causing abnormal noises and affecting the vehicle's lifespan. Lightly pressing the brake during the wait can save time. Once the light turns green, the driver only needs to shift gears and release the brake to start moving. 4. Increase Traffic Flow: The duration of green lights varies across different road sections. Some sections have green lights lasting over 60 seconds, while others may only last 20-30 seconds or even less. To pass through the green light quickly, every second counts. Keeping the gear in first and lightly pressing the brake can effectively increase traffic flow. As soon as the driver sees the green light, releasing the brake, pressing the accelerator, and shifting gears allows for smooth passage.
Was this review help?
5
2
Share
More Forum Discussions

What are the symptoms of a faulty car expansion valve?

Here are the symptoms that may appear when a car expansion valve fails: 1. If the cause is blockage: Using a pressure gauge will reveal excessively high high pressure and excessively low low pressure. 2. If the cause is excessive opening: It will result in relatively low high pressure and relatively high low pressure. Below is relevant information about a faulty car expansion valve: The working state of the expansion valve should be to change the opening degree in real time according to the change of the evaporator load to control the flow. Due to the hysteresis in heat transfer of the temperature sensed by the temperature sensing package, the response of the expansion valve is always half a beat slow. The quality of the expansion valve is reflected in the amplitude of the fluctuation - the larger the amplitude, the slower the valve response and the worse the quality.
10
0
Share

Is a Wheel Alignment Necessary When Replacing All 4 Tires?

Here are the criteria to determine whether a wheel alignment is needed after replacing all 4 tires: 1. Tire wear: Check if the old tires showed signs of uneven wear or cupping before replacement. If so, a wheel alignment adjustment is required. 2. Vehicle pulling: Determine if the vehicle exhibited pulling to one side prior to tire replacement. If yes, a wheel alignment is necessary. 3. If neither of these conditions occurred, there's no need to adjust the wheel alignment after tire replacement. Wheel alignment procedure: Drive the vehicle onto specialized alignment equipment and secure the tires using dedicated instruments. Connect to the computer system to read wheel alignment data. If discrepancies are found, adjustments should be made accordingly.
17
1
Share

What to Do When the Car Trunk Won't Open?

Solutions for when the car trunk lock won't open: Enter the car and fold down the rear seats. Open the trunk interior panel. Pull the unlocking lever manually with your hand to unlock it. Reasons why the trunk lock won't open include: 1. Issues with the linkage rod or lock cylinder. 2. Failure to use the remote key to unlock. 3. Mechanical component failure. Additional methods to open the trunk: 1. Key button: Press the trunk opening button on the car key for 3 seconds to open the trunk. 2. Driver's seat button: Some cars have a trunk opening button inside the driver's seat area; pressing it once will open the trunk. Some mid-to-high-end models feature a sensor switch—simply sweep your foot under the trunk to open it. 3. License plate light button: For this method, the car must be unlocked. There is a trunk opening button between the left and right license plate lights; press it to open the trunk.
13
0
Share

What does tire air leakage mean?

Tire air leakage means that after a tire is punctured, the internal air pressure leaks into the tire's nylon cords and steel wire layers. Even after the inner side of the tire is repaired, the air pressure in the nylon cords seeps out from the punctured spot and disappears after a period of time. Tire lifespan: The wear lifespan of a tire is 30,000 to 50,000 kilometers. If the tire hasn't reached the wear limit or mileage but has been in use for 5 years or has developed numerous cracks on the sidewalls, it needs to be replaced. Functions of tires: Tires transmit driving force, braking force, and steering force to enable vehicle operation; they support the vehicle's load; and they reduce and absorb vibrations and impacts during driving, preventing severe vibrations from damaging automotive components.
7
1
Share

What Causes Steering Wheel Vibration at Speeds Above 100?

Introduction to the causes of steering wheel vibration at speeds above 100: Poor tire dynamic balance: During driving, if a tire experiences a strong local impact, it may cause the balance weights to fall off or become damaged, thereby affecting the tire's dynamic balance. When driving at high speeds, the vehicle body and steering wheel will noticeably vibrate, with the vibration becoming more pronounced as speed increases. Significant differences in tire pressure among the four tires: When there is a large difference in tire pressure among the four tires, especially between the left and right tires, the vehicle body will experience noticeable bumps and the steering wheel will vibrate significantly during high-speed driving. Poor four-wheel alignment: When the four-wheel alignment has a large deviation angle, the vehicle body will drift and vibrate during high-speed driving. Additionally, this can lead to uneven tire wear, accelerate tire deterioration, and shorten the tire's service life.
13
3
Share

What Causes High Engine RPM but No Increase in Speed When Pressing the Accelerator?

Introduction to the reasons why the car's speed does not increase while the engine RPM is high when pressing the accelerator: Using a manual transmission: The most common reasons are issues with the clutch and the transmission. The clutch acts as an intermediary for power transfer between the engine and the transmission. If the clutch friction plate is slipping, it can lead to a loss of power. Manual transmissions have high transfer efficiency. If the clutch is functioning properly, the possible faults could be related to the output shaft or the meshing gears of the selected gear. Using an automatic transmission: The most common reason is the torque converter not locking up. Normally, when the engine RPM, vehicle speed, and throttle depth reach certain levels, the torque converter locks up. Before this happens, it is common to experience a situation where pressing the accelerator results in high RPM but no increase in speed. This phenomenon mainly occurs in vehicles equipped with torque converters, such as all ATs and some CVTs. In this regard, dual-clutch transmissions perform much better.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.