Why is Wheel Alignment Necessary?

1 Answers
LaIker
07/29/25 4:19pm
Reasons for needing wheel alignment: 1. Wheel alignment directly affects chassis stability. If abnormalities occur, it will impact the vehicle's overall safety index; 2. Wheel alignment helps reduce wear on tires, steering mechanisms, and suspension systems, thereby extending their service life; 3. Wheel alignment can also enhance driving stability and improve road safety. Main factors affecting wheel alignment: 1. High-speed driving on uneven road surfaces; 2. Front wheels subjected to external impacts, such as hitting potholes or mounting curb steps; 3. Frequently turning the steering wheel to full lock while stationary; 4. Tire pressure exceeding standard ranges.
Was this review help?
12
2
Share
More Forum Discussions

What is the fuel tank capacity of the Sonata 8 in liters?

The fuel tank capacity of the Sonata 8 is 60 liters, as officially announced. Owners who have purchased the Sonata 8 can also check this information on the vehicle's configuration sheet. The Sonata 8 requires 92-octane fuel, with a fuel consumption ranging from 5.6 to 6.9L per 100 kilometers. A full tank can cover a distance of approximately 871 to 1071 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
19
1
Share

What are the body dimensions of the Haima S5 Youth Edition?

The Haima S5 Youth Edition has body dimensions of 4195/1765/1625mm (length/width/height) and a wheelbase of 2560mm. These dimensions give it an advantage over several models in the same class, being slightly larger than the standard Haima S5. More details are as follows: 1. The Haima S5 Youth Edition is a compact SUV, equipped with a 1.6-liter naturally aspirated engine across all variants. This engine delivers 122 horsepower and a maximum torque of 160 Nm, achieving peak power at 6000 rpm and maximum torque at 4000 rpm. The engine features VVT technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. 2. The engine is paired with either a 5-speed manual transmission or a CVT. The CVT has a simple structure and provides smooth shifting. It consists of two cone pulleys and a steel belt, allowing the belt to move along the pulleys to vary speed and torque. The CVT enables continuous variable transmission within a fixed ratio range. 3. The Haima S5 Youth Edition uses a MacPherson strut front suspension and a torsion beam rear suspension. Compact cars commonly use torsion beam suspensions due to their simple structure, compact size, and space efficiency. The torsion beam rear suspension helps maximize rear passenger and trunk space.
2
1
Share

Where is the cabin air filter located in the Soueast DX7?

Soueast DX7's cabin air filter is located behind the glove box on the passenger side. Here are the specific details about the cabin air filter: 1. The cabin air filter model for Soueast DX7 is LAK948. The recommended replacement interval is generally when the vehicle has traveled 8,000 to 10,000 kilometers, but this can vary depending on the driving environment. If the environment has significant humidity variations, is consistently dry, or has heavy sandstorms, early replacement is advised. 2. The automotive cabin air filter is specifically designed for air purification inside the vehicle compartment. It uses highly efficient adsorption materials, combining activated carbon with long-fiber non-woven fabric to form an activated carbon composite filter cloth. This compact structure effectively filters smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently filters and adsorbs particulate impurities, achieving oil filtration and air purification while effectively removing organic gases such as TVOC, benzene, phenol, ammonia, formaldehyde, xylene, and styrene. It is an ideal material for high-end cars, sedans, and commercial vehicles as a cabin air filter. 3. The purpose of the automotive cabin air filter is to prevent these harmful substances from entering the air conditioning system, thereby protecting the system, providing a good air environment for passengers, safeguarding their health, and preventing windshield fogging.
14
2
Share

How to reset the tire pressure warning on Octavia?

First, check if any of the four tires are punctured. If none are found, then inspect the tire pressure of all four tires to ensure that the left and right tire pressures for the front and rear pairs are equal or similar. If there is a significant difference between the left and right tires in a pair, the warning will reappear shortly after being reset. If none of the above issues are present, turn off the ignition, then turn it back on, and press and hold the tire pressure button on the center console. The warning on the heads-up display will then be cleared. Below are the methods of tire pressure monitoring: 1. Direct tire pressure monitoring: Direct tire pressure monitoring systems use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system will automatically issue a warning if the tire pressure is too low or if there is a leak. 2. Indirect tire pressure monitoring: The working principle of indirect tire pressure monitoring is that when the pressure in a tire decreases, the vehicle's weight will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of the tires to monitor pressure. 3. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure.
13
5
Share

What does ETC at highway toll booths mean?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. Highways are equipped with one or more ETC lanes. ETC payment method: Through dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the windshield and the microwave antenna on the ETC lane at the toll station, the system connects with the bank for back-end settlement processing. This allows vehicles to pay tolls without stopping when passing through bridge or road toll stations. Banks install this type of ETC express card with a post-payment system. ETC application requirements are as follows: Provide the original and photocopy of the vehicle owner's valid ID and vehicle registration certificate. The photocopy of the driving license should include the page with the most recent annual inspection stamp. Credit card application form, which is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to the designated service point to receive and install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old. Own a vehicle registered under personal name. Precautions for installing ETC: Do not obstruct the driver's view. It is best to install it behind the rearview mirror. Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. Installing the ETC without considering this may increase blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging. The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or positions that may block the solar panel. Once installed, do not remove it arbitrarily. The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield presses the lever in. If removed, the lever will pop out, triggering the switch and locking the electronic tag, rendering it unusable. You will need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters to avoid automatic payment for the vehicle ahead. The ETC lane recognition speed is 20 km/h. Driving too fast may result in failure to read the vehicle device information, leading to payment failure. When using a debit card bound to ETC, insufficient balance may also cause payment failure.
11
4
Share

Does proceeding through a flashing yellow light count as running a red light?

Running a yellow light and running a red light are both categorized as the same traffic violation - driving a motor vehicle in violation of traffic signal regulations. According to the "Road Traffic Safety Law of the People's Republic of China", this offense is punishable by a fine and 6 demerit points. Article 26 of the "Road Traffic Safety Law of the People's Republic of China" stipulates: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. The "Road Traffic Safety Law" specifies: A yellow light serves as a warning, and motor vehicles should slow down when approaching an intersection. Vehicles that have already crossed the stop line when the yellow light comes on may continue through, while vehicles that have not crossed the stop line should come to a halt. The "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China" Article 38 states regarding motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of through vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue through. When the red light is on, vehicles are prohibited from proceeding. At intersections without dedicated non-motor vehicle or pedestrian signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed provided they do not obstruct the passage of other vehicles or pedestrians. Electronic police capture red-light running behavior based on the following three photos as evidence, which are reviewed by traffic police to determine whether a violation occurred: An image showing the vehicle has not passed the stop line when the red light is on. An image showing the vehicle's front wheels pressing against the stop line. An image showing the entire vehicle body has crossed the stop line. If these three photos demonstrate that the vehicle moved beyond the stop line while the red light was on, the traffic police can determine that the vehicle ran a red light during review. To avoid running yellow lights: Slow down when approaching intersections to 20-30 km/h, maintain a safe distance from the vehicle ahead to prevent rear-end collisions or rushing through yellow lights. Alternatively, pay attention to traffic signals in advance - observe the duration of green lights; if traffic is light and the green light duration is long, prepare to slow down.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.