Why is water dripping from the Langdong's exhaust pipe?

1 Answers
MacColin
07/28/25 4:19pm
Langdong's exhaust pipe has water dripping phenomenon because the ambient temperature is relatively low. After complete combustion of gasoline, water and carbon dioxide are produced. Water exists as vapor at high temperatures, and the water vapor condenses in the exhaust pipe and muffler. However, when the ambient temperature is high, the water vapor is discharged before it condenses. When the ambient temperature is low, the water vapor condenses into water droplets on the exhaust pipe wall and flows out along the exhaust pipe. The phenomenon of water dripping from the Langdong's exhaust pipe proves that the fuel is fully burned in the engine. The dimensions of the Langdong are 4570mm in length, 1775mm in width, and 1445mm in height.
Was this review help?
18
1
Share
More Forum Discussions

What procedures are required for vehicle name change and transfer?

Vehicle name change and transfer require the following procedures: 1. For individual to company transfer: vehicle license, registration certificate, vehicle invoice, seller's ID card, seller's photo at the vehicle management office, vehicle annual inspection with no violations, two copies of the company's organization code certificate with official seal, application form with official seal, blank paper with official seal. 2. For company to company transfer: vehicle registration certificate, valid compulsory insurance, business code certificates and official seals of both parties (copy, original for buyer), vehicle license, sales agreement, issuance of used car transaction invoice, filling out transfer forms at the vehicle management office, and processing at the relevant window. 3. For individual to individual transfer: vehicle license, vehicle registration certificate, vehicle purchase tax certificate, road maintenance fee receipt, insurance policy, vehicle and vessel usage tax certificate, ID card.
12
0
Share

What is the difference between 2.0L and 2.0T?

The differences between 2.0L and 2.0T: 1. Different types of engines: 2.0L usually refers to a naturally aspirated engine; 2.0T typically refers to a turbocharged engine. 2. Different working principles: The working principle of a 2.0L engine is that the intake air is not pressurized, and atmospheric pressure directly forces air into the combustion chamber; the working principle of a 2.0T engine is to use the inertia of the exhaust gas discharged by the engine to drive a coaxial turbine at high speed, which compresses the air and delivers it to the cylinders. Taking a turbocharged engine as an example, when the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, allowing the turbine to compress more air into the cylinders. The increased pressure and density of the air enable more fuel to be burned, and by increasing the fuel amount and adjusting the engine speed, the engine's output power can be enhanced.
9
4
Share

How is the 0-100 km/h acceleration test of the domestically produced Model 3?

The 0-100 km/h acceleration test of the domestically produced Model 3 delivers excellent driving experience and performance. Here are some precautions for using the car engine: Avoid coasting in neutral: The engine itself has a fuel-cut function during deceleration, and coasting in neutral is not conducive to fuel economy. Pay attention to observation when using the vehicle: If you notice oil stains on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S store to eliminate potential safety hazards. Do not turn off the engine immediately: For cars equipped with turbochargers, do not turn off the engine immediately after high-speed driving or climbing a slope. Let it idle for 10 minutes before shutting it off. Cars with turbochargers accumulate carbon deposits several times faster than naturally aspirated cars.
19
1
Share

What are the differences between domestically produced BMW and imported BMW?

Domestically produced BMW and imported BMW differ in their place of production and body length. The following are the introductions of the two different types: Different places of production: One is produced in Germany and imported to China as a whole vehicle. The other is assembled domestically by Brilliance with most components imported from BMW, under BMW's supervision. Initially, domestically produced BMWs had 99.9% imported components, even the cigarette lighter was imported from Germany, essentially moving the components from Germany to China for assembly. Different body lengths: In terms of body length, domestically produced BMWs are longer, while imported BMWs have standard wheelbases. The length/height/wheelbase of imported BMWs are 4915/1487/2968 respectively. The length/height/wheelbase of domestically produced BMWs are 5055/1491/3108 respectively.
12
0
Share

Are Mazda and Haima the same company?

Mazda and Haima are not the same company. The relationship between Mazda and Haima is as follows: Haima Automobile's predecessor was Hainan Mazda, which was also a joint venture of Mazda, abbreviated as "Haima". Later, Mazda shifted its cooperation to FAW and Changan, Hainan Mazda was deregistered, and the original Chinese shareholders re-registered a new company called Haima Automobile, which is the origin of Haima. Additional information: 1. Mazda: Mazda officially began producing passenger cars in the early 1960s. Mazda Motor Corporation ranks behind only Toyota, Honda, and Nissan in Japan and is one of the world's renowned Japanese automotive brands. 2. Haima Automobile: The logo of Haima Automobile features an abstract eagle shape embedded in a circle symbolizing the sun, representing "the rising sun and the soaring roc," which embodies Haima Automobile's corporate image of striving upward and aspiring to soar.
1
1
Share

How long is the BYD Han?

The BYD Han is 4980mm long. Here is a brief introduction about the BYD Han: 1. Basic information: The BYD Han has dimensions of 4950*1890*1490mm (length*width*height), with a wheelbase of 2940mm, indicating it is expected to be a mid-to-large-sized sedan. In terms of configuration, the BYD Han is equipped with a variety of features including ACC adaptive cruise control, electric suction doors, head-up display, lane change assist, lane keeping assist, and a sensor-activated trunk. 2. Powertrain: The BYD Han will be equipped with a plug-in hybrid system. The front-wheel-drive version consists of a 2.0TI turbocharged engine and a 110kW motor, while the all-wheel-drive version will additionally feature a 350kW motor on the rear axle. The transmission is paired with a 6-speed wet dual-clutch gearbox.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.