Why is Volvo called 'Fuhao'?

How to activate one-touch window lift for the Envision?

The Envision's one-touch window lift does not require additional activation and can be used directly. One-touch window lift refers to a system where the window glass can be controlled to fully open or close with a single press of a button. The Envision is General Motors' new-generation global strategic model, inheriting the design essence of the ENVISION Vision concept car. In terms of body dimensions, it measures 4686mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm. For powertrain options, the Envision is equipped with 1.5T and 2.0T engines. The 1.5T engine delivers a maximum power of 124 kW and a peak torque of 250 Nm, paired with a 7-speed dual-clutch transmission.

8

5

Share

How to Use the Windshield Wipers in a Car?

By pushing the control lever up and down, you can control the wiping state of the windshield wipers. If in the automatic adjustment mode, you can change the sensitivity of the rain sensor by rotating the adjustment knob, thereby adjusting the wiping frequency of the wipers. Below are detailed introductions about the windshield wipers: Working Principle: The motor on the windshield wiper drives the output through the worm gear on the armature shaft and then drives the output gear through the idler and idler shaft. The output arm connected to the wiper linkage is then manipulated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth. Main Function: The windshield wiper is a device used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.

2

Share

How to Remove Cement Sprayed on a Car?

Methods to remove cement sprayed on a car: 1. Pour gasoline on the affected area, wait until the paint softens slightly, then manually remove the cement. This method is suitable for large-scale removal; 2. Use a hair dryer to heat the cement-covered section. Due to the different thermal expansion rates of cement and plastic, the cement will usually detach automatically; 3. Spray white vinegar onto the cement using a spray bottle, wait for 3 to 5 minutes, then gently scrape it off with an expired bank card. The cement will come off in whole chunks. Afterwards, wash the vinegar-treated area with car shampoo. This method yields excellent restoration results with minimal cement residue; 4. If the cement proves impossible to remove, use sand wax and a polishing wheel as a last resort.

10

0

Share

Where is the windshield washer fluid reservoir located?

The windshield washer fluid reservoir is located in the engine compartment. Steps to refill windshield washer fluid: 1. Locate the hidden button under the hood, usually positioned in the middle. Press and lift upward to open the hood. 2. Find the support rod near the vehicle emblem, lift it to the upper right, and secure it in place. 3. Identify the windshield washer fluid filler port, typically marked with a blue cap featuring a water spray symbol. Open it gently. 4. Add the appropriate windshield washer fluid, noting that there are winter and summer formulations - avoid using summer fluid in winter as it may freeze. Also, be careful not to overfill to prevent spillage. 5. Securely close the cap, lower the support rod, and shut the hood by pressing down gently until you hear a 'click' indicating complete closure.

8

2

Share

What materials are needed for temporary license plate application?

Temporary license plate application requires the following materials: 1. Original and copy of vehicle qualification certificate (import certificate for imported vehicles); 2. Original and copy of the third copy of compulsory traffic insurance; 3. Original and copy of vehicle owner's identity proof; 4. For proxy applications, original and copy of proxy's ID card are required. During the use of temporary license plates, vehicles are allowed on the road but only within the roads specified by the temporary plates. Temporary plates must be affixed to the front and rear windshields of the vehicle. Failure to use temporary plates according to regulations will result in corresponding penalties. In addition to applying at the vehicle management office, temporary car license plates can also be processed at traffic branch and team vehicle management stations.

1

4

Share

Where is the anti-theft module of the Besturn B50 installed?

The anti-theft box of the Besturn B50 is located inside the driver's door. Below is a related introduction to the Besturn B50: 1. Configuration and Performance: The new Besturn B50 has enhanced safety and comfort through configuration upgrades. It features a newly added cornering assist lighting system, which automatically controls the cornering lights (front fog lights) based on driving conditions and vehicle status. Additionally, it includes safety equipment such as a passenger seatbelt reminder, anti-whiplash seats, hidden airbags throughout the vehicle, central locking, and headlight level adjustment. 2. Safety Features: The new Besturn B50 is equipped with a cornering assist lighting system that automatically adjusts the cornering lights (front fog lights) according to driving conditions and vehicle status to improve driving safety and comfort. It also includes a passenger seatbelt reminder, anti-whiplash seats, hidden airbags, central locking, and headlight level adjustment among other safety features.

11

3

Share

Why is Volvo called 'Fuhao'?

How to activate one-touch window lift for the Envision?

How to Use the Windshield Wipers in a Car?

How to Remove Cement Sprayed on a Car?

Where is the windshield washer fluid reservoir located?

What materials are needed for temporary license plate application?

Where is the anti-theft module of the Besturn B50 installed?

What is the emission standard for the 8th-generation Civic?

Which generation of Aisin transmission is used in the Lavida?

What does it mean when the engine malfunction indicator light flashes?

What Causes the Muffled Locking Sound in a Mercedes-Benz?