Why is Toyota so incredibly durable?

How Often Should Brake Pads and Brake Discs Be Replaced?

Disc brake pads generally need to be replaced after the vehicle has traveled 60,000 to 80,000 kilometers. The lifespan of brake discs is typically over 3 years or 100,000 kilometers. Four warning signs before brake failure: 1. Abnormal noises when braking: If a sharp and harsh metal friction sound is heard when applying the brakes while driving, there are two possible scenarios: it may be due to the brake pads wearing thin, causing the wear limit indicator to come into contact with the brake disc, indicating that the brake pads have reached their limit and need immediate replacement. Alternatively, the noise could be caused by foreign objects in the brake pads or rust on the brake discs. In most cases, pressing the brakes a few more times may alleviate the noise, but if it persists, a visit to the repair shop is necessary. 2. Soft brakes: If the brakes feel soft, the issue might lie in the brake lines or the brake master cylinder. First, press the brake pedal to check for any brake fluid leaks. If no external leaks are found, inspect the wheel cylinders or the master cylinder for faults. If the pedal height slightly increases and feels spongy after several presses, it indicates air has entered the brake lines. 3. Hard brakes: If the brake pedal is difficult to press, the problem could be with the brake booster pump or a damaged one-way valve in the vacuum reservoir. Regardless of the cause, if the brake pedal feels unusually high and stiff or lacks free travel, it is crucial to visit a repair station immediately. 4. Brake pull: Brake pull occurs when the vehicle veers to one side during braking, causing the steering wheel to noticeably pull in one direction. This is usually caused by uneven wear on the brake pads or issues with the brake calipers, resulting in uneven braking force on either side. Therefore, immediate inspection at a repair shop is required if this occurs.

8

3

Share

Is the window tint provided by 4S stores for new cars applied to the entire vehicle or just the windows?

4S stores generally provide window film. Here is an introduction to vehicle window tinting: Introduction to car window tinting: Car window tinting involves applying a thin film to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also known as solar film or heat-insulating film. Functions of car window tinting: Its main functions are to block ultraviolet rays, reduce heat, prevent serious consequences from glass shattering in special situations, and reduce glare. Additionally, the one-way transparency feature of solar film helps protect personal privacy. Thickness of heat-insulating film: The thickness of car heat-insulating film is typically around 1.5 mil. 'Mil' is an imperial unit, where 1 mil equals one-thousandth of an inch, or 0.0254 mm.

2

5

Share

How to Solve the Problem of Always Smelling Exhaust Fumes in the Cabin?

Bamboo charcoal bags have strong odor adsorption capabilities, making this method very effective in eliminating odors inside the car, with long-lasting effects. Bamboo charcoal bags can selectively adsorb various substances in the air to achieve disinfection and deodorization. Additionally, bamboo charcoal bags are inexpensive and easy to purchase, making them an excellent choice for odor removal. It is recommended to choose bamboo charcoal. More detailed information is as follows: 1. Fruits like pomelos and lemons also have excellent odor-removing effects. The efficacy of pomelos is similar to that of bamboo charcoal bags, with the ability to adsorb odors, while lemons are effective due to their strong and long-lasting fresh scent. Natural ventilation methods, such as opening windows for cross-ventilation while driving and keeping windows open as much as possible when parked, can accelerate gas dissipation. After buying a new car, try to avoid adding interior decorations. If decorations are necessary, choose high-quality products. Also, avoid exposing the new car to direct sunlight, as heating can make odors harder to remove and harmful to health. The most important thing is to thoroughly inspect the car before purchase, eliminating potential odors during the selection process. 2. Additionally, odors inside the car may be caused by a dirty cabin air filter. A dirty cabin air filter can lead to unpleasant smells. It is recommended to replace the cabin air filter and perform a cleaning of the air conditioning ducts, which can effectively remove odors and maintain clean ducts.

3

Share

What is the Principle of the Engine Valve Train?

The principle of the engine valve train is to open and close the intake and exhaust valves of each cylinder in a timely manner according to the working cycle and ignition sequence requirements of the engine, allowing fresh air to be drawn into the cylinder and exhaust gases to be expelled after combustion. Below is a detailed explanation: 1. When the working cycle of the cylinder requires the valves to open for gas exchange, the crankshaft drives the camshaft to rotate through the transmission mechanism. The raised part of the cam on the camshaft pushes the rocker arm to swing via the tappet, push rod, and adjusting screw. The other end of the rocker arm then pushes the valve downward, further compressing the spring. Once the peak of the cam's raised part passes the tappet, the thrust on the tappet gradually decreases. The valve's opening gradually reduces under the tension of the spring until it finally closes. 2. The valve train often uses overhead valves and is categorized into underhead, mid-head, and overhead types based on the camshaft's position. The valve train consists of two main parts: the valve drive group and the valve group. The valve drive group includes the crankshaft timing gear, camshaft timing gear, camshaft, tappet, push rod, rocker arm, valve clearance adjusting screw, lock nut, and rocker arm shaft. The valve group includes the valve, valve guide, valve spring, valve spring seat, valve oil seal, and valve seat. 3. When the maximum raised part of the cam contacts the tappet, the valve reaches its maximum opening. Subsequently, the raised surface of the cam in contact with the tappet gradually decreases, and the valve begins to close under the action of the valve spring, reversely pushing the rocker arm and other transmission components, causing the tappet to move downward to maintain contact with the cam. When the raised part of the cam leaves the tappet, the valve fully closes.

20

5

Share

At What Mileage Should a Passenger Car Be Scrapped?

When a passenger car reaches a normal driving mileage of 600,000 kilometers, the state will guide its scrapping. If the vehicle is over 15 years old and has not reached 600,000 kilometers, it will require two annual inspections. If it fails the inspection, it will be mandatorily scrapped. The difference between guided scrapping and mandatory scrapping: Guided scrapping is a recommendation for scrapping, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: Reaching the prescribed service life; Failing to meet the national safety technical standards for in-use vehicles after repairs and adjustments; Still failing to meet national standards for pollutant or noise emissions after repairs, adjustments, or control technology measures; Failing to obtain the mandatory inspection certification mark for three consecutive inspection cycles after the expiration of the inspection period.

19

5

Share

What does an exclamation mark on the steering wheel indicate?

An exclamation mark on the steering wheel is a warning sign of a malfunction in the power steering system, and driving should not be continued under this condition. When the power steering system malfunctions, a corresponding warning light will illuminate on the dashboard. The power steering system warning light typically features a steering wheel with an exclamation mark next to it, usually in yellow. A malfunction in the power steering system may cause the vehicle to suddenly lose power steering assistance. If an obstacle appears ahead that requires evasive action, this could lead to a traffic accident. Vehicles equipped with hydraulic power steering systems should regularly have their power steering pump belts inspected. Hydraulic power steering systems include a power steering pump, which is driven by the engine via a belt. If the belt becomes worn, slips, or breaks, the vehicle will lose power steering assistance. Under normal circumstances, when the ignition switch is turned from OFF to ACC, the electric power steering system warning light will briefly illuminate to perform a self-check. If no issues are detected, the light will turn off. Scenarios when the electric power steering system warning light illuminates: 1. The light remains on continuously. This indicates a complete failure in the electric power steering system, requiring inspection and replacement of faulty components at a repair shop. 2. The light briefly illuminates for five to ten minutes before turning off. This is caused by overheating of the electric power steering motor. In this case, the system will enter an overheating protection mode, reducing or pausing motor assistance until the temperature decreases, after which normal operation will resume. If the warning light remains on after the ignition switch is turned on or during driving, it indicates a fault in the electric power steering system. Immediate inspection and repair at a service center are recommended. If a yellow warning light illuminates, it means partial failure of the steering system, resulting in increased steering effort and difficulty. If a red warning light illuminates, it indicates complete failure of the steering system, with power steering assistance fully disabled. The driver should reduce speed immediately, park the vehicle safely, and arrange for repairs or assistance.

1

5

Share

Why is Toyota so incredibly durable?

How Often Should Brake Pads and Brake Discs Be Replaced?

Is the window tint provided by 4S stores for new cars applied to the entire vehicle or just the windows?

How to Solve the Problem of Always Smelling Exhaust Fumes in the Cabin?

What is the Principle of the Engine Valve Train?

At What Mileage Should a Passenger Car Be Scrapped?

What does an exclamation mark on the steering wheel indicate?

What are the symptoms of a bad lower control arm in a car?

How to reset the tire pressure on Baojun 730?

Where to Check China VI Emission Standard?

How Many Digits Does an Engine Number Have?