Why is throttle body cleaning so expensive at 4S stores?

1 Answers
CaliLee
07/30/25 9:53am
Because throttle bodies are controlled by the engine's computer, cleaning the throttle body (especially disassembly cleaning) usually requires specialized diagnostic equipment to rematch the throttle body afterwards. Ordinary repair shops may not have this diagnostic equipment, but 4S stores definitely do, which is why throttle body cleaning is more expensive at 4S stores. Below are specific details about throttle bodies: 1. Throttle Body Introduction: The throttle body is a controllable valve that regulates air intake into the engine, with two types: traditional cable-operated and electronic throttle bodies. After air enters the intake manifold, it mixes with gasoline to form a combustible mixture for combustion. The responsiveness of vehicle acceleration is closely related to the cleanliness of the throttle body. 2. Throttle Body Classification: There are two types of throttle bodies: traditional cable-operated and electronic. Traditional engine throttle body mechanisms operate via a cable (flexible steel wire) or linkage rod, connecting the accelerator pedal to the throttle linkage plate. Electronic throttle bodies primarily use throttle position sensors to control the opening angle of the throttle body based on the engine's energy requirements, thereby regulating the amount of air intake.
Was this review help?
15
2
Share
More Forum Discussions

Can National IV Emission Vehicles Be Transferred Across Provinces?

National IV emission vehicles cannot be transferred across provinces for registration and licensing in other regions; only National V emission standard motor vehicles are eligible for such applications. Below are the relevant details: 1. The implementation of the National V standard for motor vehicles is carried out regionally based on the progress of fuel quality upgrades. (1) In the 11 eastern provinces and municipalities (Beijing, Tianjin, Hebei, Liaoning, Shanghai, Jiangsu, Zhejiang, Fujian, Shandong, Guangdong, and Hainan), starting from April 1, 2016, all imported, sold, and registered light-duty gasoline vehicles, light-duty diesel passenger vehicles, and heavy-duty diesel vehicles (for public transport, sanitation, and postal purposes only) must comply with the National V standard requirements. (2) Nationwide, starting from January 1, 2017, all manufactured, imported, sold, and registered light-duty gasoline vehicles and heavy-duty diesel vehicles (for passenger transport, public transport, sanitation, and postal purposes) must comply with the National V standard requirements. (3) Nationwide, starting from July 1, 2017, all manufactured, imported, sold, and registered heavy-duty diesel vehicles must comply with the National V standard requirements. (4) Nationwide, starting from January 1, 2018, all manufactured, imported, sold, and registered light-duty diesel vehicles must comply with the National V standard requirements. 2. Automobile manufacturers and importers must ensure that the relevant information of their vehicles meets the standards. As the responsible entities for environmental production consistency management, they should, in accordance with the newly revised "Air Pollution Prevention and Control Law" and relevant regulations, publicly disclose the emission inspection information and pollution control technology information of their manufactured and imported vehicle models. Only after passing the inspection can the vehicles be sold, ensuring that the actual production and sales of vehicles meet the emission standard requirements. 3. The Ministry of Environmental Protection, in collaboration with relevant departments, conducts inspections of motor vehicle environmental compliance in accordance with the law. For newly manufactured and sold vehicles that do not meet the emission standard requirements, strict legal penalties will be imposed; and active cooperation will be provided to relevant departments to strengthen the management of vehicle fuels, promote fuel quality upgrades, and ensure the quality of fuel products. This announcement takes effect from the date of issuance.
16
2
Share

Does the Three-Way Catalytic Converter Need Regular Cleaning?

The three-way catalytic converter requires regular cleaning. The use of gasoline with high sulfur and phosphorus content can form chemical deposits on the surface of the oxygen sensor and the three-way catalytic converter. Stop-and-go driving conditions may lead to incomplete fuel combustion, and the byproducts of incomplete combustion can adhere to the surface of the three-way catalytic converter. Additionally, during the cleaning of fuel injectors, throttle valves, and intake tracts, carbon deposits and particulate matter can contaminate the three-way catalytic converter. Relevant information about the three-way catalytic converter is as follows: 1. Introduction: The three-way catalytic converter is the most important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx in vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 2. Working Principle: When high-temperature vehicle exhaust passes through the purification device, the catalyst in the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting specific oxidation-reduction chemical reactions.
15
0
Share

Which is more fuel-efficient, the Arrizo 5 or the Vision?

The fuel consumption of the Vision and Arrizo 5 is very close, and both models perform well in terms of fuel efficiency. The Vision's fuel consumption is generally around 7-8L per 100km, while the Arrizo 5's fuel consumption is approximately 8-9L per 100km. Below are more details about the 2018 Vision: 1. Model: The car is positioned as a compact sedan. 2. Body dimensions: The length, width, and height are 4599/1747/1482mm, with a wheelbase of 2615mm. 3. Powertrain: The entire lineup is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or a 4-speed automatic transmission. The maximum power is 80KW, the maximum horsepower is 109PS, and the maximum torque is 140N·m.
19
3
Share

What to Do If You Lose Your Car Key?

Solutions for lost car keys: 1. Use the spare key: Usually, when purchasing a car, two keys are provided to prevent being unable to open the car door if one is lost. Therefore, in case of losing a key, you should quickly go home to get the spare key. Note that it's best not to keep the spare key in the car; storing it in a hidden place at home is preferable. Otherwise, losing the key can become more troublesome. 2. Contact a locksmith: If the vehicle is far from the spare key or there is no spare key, you need to find a professional locksmith to unlock the car. However, you may need to provide your ID card or vehicle registration. After unlocking, you can drive the car back to your community parking lot and then quickly get a new key made. Otherwise, you won't be able to use the vehicle normally. When going to a 4S store to get a new key, you need to bring your vehicle registration and identity information to obtain the anti-theft password and configure a new key. It's important to note that during the period of key loss, it's best not to leave valuable items in the car, as security cannot be guaranteed. Also, remember to replace the door lock to avoid unnecessary losses caused by criminals.
19
3
Share

Is 210 Seconds Enough Time for Reverse Parking?

According to the "Motor Vehicle Driver Examination Content and Methods," the reverse parking item in Subject 2 must be completed within 210 seconds (3 minutes and 30 seconds). Statistical data shows that the average time for students to complete reverse parking is around 2 minutes, so 210 seconds is definitely sufficient. Relevant information about the driver's license examination is as follows: 1. Introduction: The driver's examination is a qualification test organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's examination can one obtain a driver's license and legally operate a motor vehicle. 2. Content: The motor vehicle driver examination is divided into three parts: the examination on road traffic safety laws, regulations, and related knowledge (also known as the "theoretical test" or "Subject 1"), the field driving skills test (commonly known as the "parking test" or "Subject 2"), and the road driving skills and safe civilized driving knowledge test (commonly known as the "road test" or "Subject 3"). The examination content and passing standards are uniform nationwide, with specific test items defined according to different types of vehicles.
8
5
Share

What Causes Heavy Steering in Cars?

The main reasons for heavy steering in cars are as follows: 1. Lack of power steering fluid: Insufficient power steering fluid directly leads to heavier steering because the power steering pump requires adequate fluid to push the piston and provide assistance. When a vehicle lacks power steering fluid, it is necessary to check for oil leaks in the pipelines. If there are no leaks, check whether the fluid is dirty or if the pipelines are clogged, and then carry out repairs based on the specific issue. 2. Slippage or breakage of the power steering pump belt: The power steering pump relies on the belt to transmit the engine's power. If the belt slips, the pump cannot reach the required operating speed, resulting in heavier steering. If the belt breaks, the pump loses its power source entirely, causing a complete loss of power steering. In such cases, simply replacing the power steering pump belt will resolve the issue.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.