Why is there water leakage at the front reading light of the car?

2 Answers
LaSienna
07/24/25 8:34am
Water leakage at the front reading light of the car may be caused by loose screws at the antenna. The function of car lights: Car bulbs are the bulbs that ensure driving safety and illuminate the road during night driving. Car bulbs provide safety and comfort for the family during driving. Car bulbs belong to automotive supplies, and car product associations focus on automotive supply services. Differences between different lights: Poor lighting conditions can easily cause eye fatigue and fail to provide drivers with effective illumination brightness and area. Good car bulbs can provide higher brightness and better visibility, improving driving comfort and safety, ensuring driving safety, and making driving full of confidence.
Was this review help?
4
0
Share
DiEmiliano
08/11/25 4:09am
I've seen many car enthusiasts complain about reading light leaks, mainly caused by roof sealing issues. The most common problem is clogged sunroof drainage pipes, where rainwater accumulates in the channels and seeps through the reading light gaps. Another cause is aging windshield sealant, which leaks during heavy rain. Damaged roof sealing strips are also a major factor. When inspecting yourself, open the sunroof to check if the drainage ports are blocked by leaves or dirt, and try using a wire to clear them. If that doesn't work, check the edges of the windshield for cracks or gaps. Water leakage can short-circuit electronic wiring, leading to more faults, so early intervention is crucial. Don't delay too long, as repairs will become more expensive. I recommend starting with simple checks and seeking professional help if the issue is complex.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What causes the turn signal to intermittently fail and then work normally?

Possible causes include loose wiring or a faulty flasher relay. Here are the relevant details: 1. Turn Signal: The turn signal is an important indicator light that activates when a motor vehicle is turning to alert surrounding vehicles and pedestrians. The turn signal bulb uses a xenon tube, controlled by a microcontroller circuit, with alternating left-right flashing operation. The turn signal employs a flasher to achieve the blinking effect, which can be mainly categorized into three types: thermal (bimetallic strip), capacitor, and electronic. 2. Flasher Relay: Also known as a flasher, its function is to generate intermittent current to supply the turn signal lights, making them flash on and off to indicate the vehicle's direction. The flasher features a new circuit design consisting of a low-voltage switch circuit, high-voltage switch circuit, pulse generation circuit, two-stage amplifier with dual-transistor output circuit, and two sets of light indicator circuits.
13
5
Share

Is a self-tapping screw puncturing a tire man-made?

Whether a self-tapping screw puncturing a tire is man-made depends on the location of the puncture. If the screw is located on the sidewall of the tire, it is highly likely to be man-made, as screws cannot naturally puncture the sidewall during normal driving. Below is relevant information about tires: 1. Main materials of tires: The primary material of tires is rubber, which has the characteristic of aging over time or after prolonged storage. This aging leads to significant changes in the physical properties of the tire, such as hardness and wear resistance. Continued use of aged tires can affect vehicle performance at best or lead to tire blowouts at worst. 2. Tire lifespan: Typically, all-season or economy tires have a lifespan of 3-5 years or around 50,000 kilometers. Under normal conditions, tires have a sufficient lifespan of one year from the date of manufacture. However, for high-performance tires, the lifespan is only about 20,000-30,000 kilometers.
16
0
Share

What is the difference between Intelligent Navigation System and Adaptive Cruise Control?

Intelligent Navigation can achieve automatic following at speeds of 0-120 km/h, while Adaptive Cruise Control is used on highways by setting the following distance from the vehicle ahead and maintaining this effective distance. Below is a relevant introduction to the Intelligent Navigation System: 1. Function: The system can control the vehicle's speed based on the set speed and the time-distance to the vehicle ahead, and keep the vehicle in the center of the lane by detecting the lane markings on both sides. The Intelligent Navigation System mainly provides driving assistance on highways or elevated roads with good road conditions, and the driver needs to maintain control of the vehicle at all times. 2. Activating the Intelligent Navigation System: The ICC function is activated by pressing the main switch button on the left side of the steering wheel, at which point the ICC icon and set speed will appear on the instrument panel; the Intelligent Navigation System selection is made via the buttons on the right side of the steering wheel to choose the system on the instrument panel.
5
5
Share

What is the reason for one side of the automatic folding mirror not moving?

If one side of the automatic folding mirror cannot move automatically, it may be due to damaged gears or a disconnected circuit on that side, and it can be fixed at a repair shop. Below is relevant information about rearview mirrors: 1. Introduction to rearview mirrors: Rearview mirrors are tools that allow drivers to directly obtain external information about the rear, sides, and lower parts of the car while seated in the driver's seat. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, all countries require that cars must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction. 2. Installation of rearview mirrors: When designing rearview mirrors, the main design considerations include the field of view (indirect vision) that the rearview mirror can obtain, image distortion, image clarity, image size, the position of the image in the rearview mirror, etc., making it easy to adjust according to changes in the driver's viewpoint. Rearview mirrors should be installed in the position with the least vertical vibration on the vehicle.
9
3
Share

How Long Does It Take to Drive 100km?

The time it takes to drive 100 kilometers depends on the speed: at 100 km/h, it takes 1 hour; at 50 km/h, it takes 2 hours; at 10 km/h, it takes 10 hours; at 1 km/h, it takes 100 hours. This depends on the road conditions and the speed of the vehicle, so there is no single standard answer. Even on the same road, two drivers may drive at different speeds, so the time taken will not be exactly the same. In China, the term "100 mph" typically refers to 100 kilometers per hour. Actually, "mph" stands for "Mile per hour" (1 mile = 1.6 kilometers). So, strictly speaking, 100 mph equals 160 km/h. However, "mph" is often used colloquially in China to mean kilometers per hour for simplicity. Driving Tips: Before driving, check the vehicle's condition to ensure it is in good working order and avoid driving with potential hazards to ensure safe driving; always wear a seatbelt while driving; avoid driving while fatigued; never drive under the influence of alcohol; exercise caution when driving in adverse weather conditions; and never make a U-turn on the highway.
14
0
Share

Do I still need to pull the handbrake after the auto hold turns off when the engine is off?

If you turn off the engine first and then unfasten the seat belt, you need to pull the handbrake button. If you unfasten the seat belt without turning off the engine, the auto hold button will automatically switch to handbrake mode, and you don't need to pull the handbrake again at this time. It is recommended to adopt the first mode. The following is a related introduction to auto hold: 1. Function: The English name of auto hold is AUTOHOLD. The function of auto hold is that the vehicle itself can automatically apply the brakes according to the actual situation without the driver's operation. 2. Working principle: The brake management system controls the braking of all four wheels through the extended function of the electronic parking brake (EPB). In other words, the auto hold system is an extended function of the electronic parking brake (EPB) and is controlled by the ESP component. When the vehicle is temporarily parked and needs to be restarted within a short period of time, the parking is completed by the brake controlled by ESP.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.