Why is there water in the trunk of a Chevrolet Sail?
2 Answers
Chevrolet Sail trunk water ingress reasons are as follows: Loose rubber hose connection: The reason for water accumulation in the tire compartment of the Chevrolet New Sail trunk is due to the loose connection between the tailgate's rubber hose and the car body, which can be seen in the upper left corner when the tailgate is opened. Remove debris from the connection, dry it, and seal it with glass adhesive. The sealing strips on the car are consumables that are frequently exposed to external gases and used at a high frequency, making them prone to aging and poor sealing, leading to water leakage. Clogged drain hole: Water in the trunk can be drained through the hole at the bottom to prevent water accumulation. If this hole is clogged, it will cause poor drainage and lead to problems. Therefore, this drain hole needs to be checked, and if clogged, it should be unclogged immediately. The drain hole prevents rainwater from entering the car body during rainy conditions and drains liquids from the car to the outside.
Speaking of the Chevrolet Sail trunk water leakage issue, I personally encountered this when I often drove this car before. At first, I didn’t understand why things would get wet after a rainy day, but later I figured out that the rubber seal around the trunk lid had aged, allowing rainwater to seep through the gaps. Also, the drainage holes near the wheels sometimes get clogged with mud and leaves, causing water to backflow into the car. Once, I lifted the trunk mat and saw the holes were black and clogged—just poking them with a wire cleared them out. If the seal is damaged, you can buy a cheap replacement at an auto parts store. Don’t underestimate this issue; prolonged neglect can lead to rust and damage the frame, potentially lowering the car’s value. It’s best to check the seals after each car wash and keep them dry—it’s simple and cost-effective, saving you from expensive repairs later.
