Why is there water in the car when it rains?

What Causes the High Beam to Not Work While the Flash Function Still Operates?

The reason the high beam does not work while the flash function still operates could be due to a faulty lighting control module or wiring issues. If one high beam works while the other does not, the problem may lie with the LED headlight module or the LED bulb itself. Solutions for a non-functioning car high beam: Open the car's fuse box and check the condition of the relay and fuses; remove the high beam bulb to inspect if the filament is intact; examine the headlight combination switch and wiring; check if the voltage regulator on the alternator is set too high. Precautions when using high beams: On roads without a central divider or centerline, do not use high beams when an oncoming vehicle is within 150 meters. During encounters: Avoid using high beams on narrow bridges, narrow roads without central dividers or centerlines, or when encountering non-motorized vehicles. At intersections: Do not use high beams when turning at signal-controlled intersections. At night: Refrain from using high beams when driving in conditions with poor visibility, such as no streetlights, bad weather, fog, rain, snow, or dust, or when a following vehicle is driving closely behind another vehicle in the same direction.

6

4

Share

What Causes No Airflow from Car Vents?

The reasons for no airflow from car vents are as follows: 1. Excessive dust on the air filter, resulting in insufficient airflow. 2. Damage to the vent flap motor or jamming of the vent flap itself. 3. Damage to the air duct assembly, preventing air from the blower from reaching the vents. 4. Malfunction in the air conditioning piping or electrical system causing frost buildup in the evaporator, restricting airflow to the vents. Solutions include: 1. Remove and inspect the air filter, then replace or clean it as needed. 2. Take the vehicle to a repair facility for thorough system inspection and fault diagnosis.

13

0

Share

How to Open a Mercedes Door with the Key When the Battery is Dead?

When a Mercedes-Benz vehicle has a completely dead battery, you can use the mechanical key to open the door or trunk. Here are some details about the domestic Mercedes GLB: 1. Dimensions: The length, width, and height are 4638mm, 1834mm, and 1687mm respectively, with a wheelbase of 2829mm. 2. Powertrain: Equipped with a 1.3T turbocharged engine, delivering a maximum output power of 120kW and a peak torque of 250Nm. 3. Interior: Features a brand-new design with an 8-inch high-resolution display at the center of the dashboard, supporting Android Auto smartphone connectivity.

5

4

Share

How many points will be deducted for going straight in a U-turn lane?

According to the "Road Traffic Safety Law", violators will be penalized with 3 demerit points. Going straight in a U-turn lane is considered a violation of the prohibition signs or markings for motor vehicles. However, if it is a combined U-turn and straight lane, no demerit points will be deducted. Permissible U-turn situations: Intersections with U-turn signs allow U-turns: If there is a clear U-turn sign at the intersection, a U-turn can be made. If there is a U-turn traffic light, the U-turn must follow the signal. If there is no traffic light, a U-turn can be made based on the specific situation, provided it does not interfere with other vehicles or pedestrians. Intersections without explicit prohibition of U-turns or left turns allow U-turns: If there is no explicit prohibition of U-turns at the location, a U-turn can be made. Here, "no explicit prohibition of U-turns" means that as long as there are no "No U-turn signs," "No left turn signs," or solid lines in the middle of the road, a U-turn can be safely made. Yellow grid lines also allow U-turns: Yellow grid lines are actually no-parking grid lines painted at intersections prone to congestion due to temporary parking, important unit entrances, and other locations where they are needed. Any vehicle stopping on the no-parking grid line (including waiting for traffic lights) is considered a violation. Although vehicles cannot stop in the yellow grid line area, U-turns are allowed in this area. As long as there is no central road barrier, yellow grid lines are equivalent to "U-turn permitted." Intersections with U-turn traffic lights: This is straightforward. If there is a U-turn traffic light, you must follow the signal—only proceed on green. When both "No left turn" and "U-turn permitted" signs appear: U-turns are allowed, but left turns are prohibited. However, "No U-turn" is not the same as "No left turn." Precautions when making U-turns at intersections: Observe the road markings. If they are solid lines, U-turns are not allowed under any circumstances. Continue driving forward to find a suitable location for a U-turn. If there is a "No left turn" sign ahead, even if there is no mention of prohibiting U-turns, U-turns cannot be made at this intersection because the actions of left turns and U-turns are very similar, and U-turns always involve a left turn first. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, you cannot make a U-turn at this intersection. When making a U-turn, you must yield to vehicles going straight and only proceed if it does not interfere with their normal movement. Otherwise, you will bear full responsibility for any accidents. Generally, near the intersection stop line, lanes have guiding arrows for vehicles to choose their direction. The leftmost lane does not always have a left-turn arrow. On some roads, if there is a straight arrow, even without explicit "No U-turn" signs, U-turns are not allowed. U-turns cannot be made on pedestrian crosswalks, as this is also a violation.

15

2

Share

Is 10W-40 engine oil for winter or summer use?

10W-40 is the SAE standard viscosity value, where W stands for WINTER. 10W-40 engine oil can be used in winter. For 10W-40 automotive engine oil, it can generally be used normally at temperatures ranging from below zero to above 20 degrees. Additional information is as follows: Winter oil models include 0W, 5W, 10W, 15W, 20W, and 25W. The smaller the number before W, the lower the viscosity at low temperatures, the better the flow performance at low temperatures, and the lower the minimum suitable temperature. The number after W indicates the oil viscosity at 100°C.

19

3

Share

Should sealant be applied for a leaking valve cover gasket?

Sealant should be applied for a leaking valve cover gasket. Applying sealant to the valve cover gasket primarily serves a sealing function to prevent engine oil leakage. Below are relevant details: 1. It is a rubber gasket, visible upon disassembling the valve cover, with each spark plug tube sleeve having one gasket that serves to seal and prevent oil leakage; 2. The valve cover gasket is highly useful, mainly addressing issues such as poor sealing of piston rings due to engine aging; 3. Blow-by gases causing excessive exhaust pressure leading to poor sealing of the valve cover gasket, or the use of low-quality engine oil resulting in excessive carbon buildup and piston ring sticking, uneven force during valve cover installation, as well as aging of the valve cover gasket, can all cause oil leakage from the valve cover gasket.

13

0

Share

Why is there water in the car when it rains?

What Causes the High Beam to Not Work While the Flash Function Still Operates?

What Causes No Airflow from Car Vents?

How to Open a Mercedes Door with the Key When the Battery is Dead?

How many points will be deducted for going straight in a U-turn lane?

Is 10W-40 engine oil for winter or summer use?

Should sealant be applied for a leaking valve cover gasket?

Is a Tire Pressure of 180kPa Indicative of a Flat Tire?

What to Do If the Car Seat Feels Uncomfortable with the Front Higher Than the Back?

Is 8 L/100km Fuel Consumption Considered High?

How to Check the Remaining Points on Your Driver's License in 12123?