Why is there water dripping from the City's exhaust pipe?

1 Answers
LeCarter
09/05/25 6:44am
Water dripping from the City's exhaust pipe is a sign of efficient combustion in the car's engine. Under ideal conditions, complete combustion of gasoline should only produce water and carbon dioxide. Initially, this water is in the form of colorless and odorless water vapor. However, when it exits the exhaust pipe and encounters cooler temperatures, it condenses and drips below the exhaust pipe. This is a common phenomenon in engines that are in good working condition. The dimensions of the City are 4440mm in length, 1695mm in width, and 1495mm in height, with a wheelbase of 2600mm. In terms of exterior design, the front face of the City is very similar to the new Fit, with very pronounced lines on the front fenders, and the body features a dual waistline design.
Was this review help?
8
1
Share
More Forum Discussions

How to Turn on the Heater in a Pure Electric Vehicle?

Pure Electric Vehicle The method to turn on the heater in a pure electric vehicle is: turn off the AC switch, then adjust the heater temperature. Pure electric vehicles use an internal resistance device to generate heat, which is then distributed into the cabin via a blower. Therefore, pure EV owners should ensure not to activate the AC button when using the heater. For pure electric vehicles, operating the heater consumes battery power. To conserve energy, you can switch the air conditioning to internal circulation mode when turning on the heater, which helps warm up the cabin faster. Owners should also regularly monitor the remaining driving range to recharge promptly.
11
1
Share

How many people can the Elysion accommodate?

The Elysion can accommodate 7 people. Taking the 2019 Elysion as an example, it is an MPV with the following dimensions: length 4950mm, width 1842mm, height 1711mm, a wheelbase of 2900mm, a minimum ground clearance of 134mm, and a curb weight of 1941kg. The 2019 Elysion features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146PS, a maximum torque of 175Nm, and a maximum power of 107kW, paired with an electronic continuously variable transmission.
14
1
Share

What are the functions of automotive antifreeze?

Automotive antifreeze serves the following purposes: It protects the normal and optimal operation of the engine. The engine coolant circulates within the engine's fuel tank, providing anti-freeze, anti-rust, and anti-corrosion effects. It also prevents the car from freezing, which could cause the radiator to crack or damage engine components due to freezing. Engine coolant primarily consists of substances like ethylene glycol aqueous solution, among others. Many additives are incorporated into the coolant to protect various types of engines. Coolant is an indispensable medium for ensuring the proper heat dissipation and operation of a car's engine. If the engine lacks antifreeze, it can lead to the engine's temperature failing to decrease, resulting in severe malfunctions such as cylinder scuffing.
9
2
Share

How to Recharge Refrigerant in Car Air Conditioning?

Car air conditioning refrigerant recharge methods are: 1. High-pressure side charging, suitable for recharging after leak detection and vacuuming. Note that the compressor must not be turned on during this method, the engine should be off, and the refrigerant tank needs to be inverted; 2. Low-pressure side charging, where gas is added. This method is characterized by slow charging speed and is typically used for refrigerant replenishment. Tips for car air conditioning refrigerant recharge: After completing the refrigerant recharge, close the low-pressure manual valve on the manifold gauge, shut the injection valve on the refrigerant tank, stop the engine, and quickly remove the manifold gauge from the compressor to prevent excessive refrigerant leakage.
8
2
Share

What is the reason for the automatic flashing of hazard lights during emergency braking?

The reason for the automatic flashing of hazard lights during emergency braking is that the vehicle is equipped with an Emergency Stop Signal (ESS) system. When the vehicle speed reaches 50 km/h and emergency braking occurs, the hazard lights will flash continuously to provide information to the following vehicles, allowing them sufficient reaction time and braking distance for emergency maneuvers, thereby preventing rear-end collisions. Currently, mainstream ESS systems determine whether it is an emergency brake based on the magnitude of acceleration during vehicle deceleration. Vehicles equipped with the emergency braking hazard light activation function also feature an automatic door unlocking function. During emergency braking, the hazard lights flash and the doors automatically unlock to prevent the situation where the doors cannot be opened in case of an accident, ensuring quick rescue operations.
6
4
Share

What is the top speed of the Kawasaki Z400?

The top speed of the Kawasaki Z400 is 130 kilometers per hour. Speed is a form of expressing velocity, referring to the total distance an object travels within one hour. The units for speed are kilometers (km) or miles per hour (mph). Speed is commonly used in the field of transportation but is not the standard speed unit in the International System of Units. The Kawasaki Z400 is the street version of the Kawasaki NINJA400, available in two models: a low-spec version and a high-spec version, both offering two color options: black-red and black-green. The low-spec version primarily differs in features such as colored alloy wheels, lower fairings, a front windshield, and a single-seat configuration. The Kawasaki Z400 is equipped with a 400cc parallel-twin DOHC eight-valve liquid-cooled engine and features a slipper clutch design.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.