Why is there water accumulation in the Cayenne's door?

2 Answers
AdalynnLynn
09/03/25 7:25am
Water entering the door is most commonly caused by rainwater flowing into the car through the outer seal of the window. Another situation is that water from regular car washes can also flow into the door through the outer seal of the window. Methods to deal with water in the door: The method to handle water accumulation in the door is that there are usually drainage valves at the bottom edge of the door. Most doors have three drainage valves, so accumulated water can be drained by opening these valves. The main function of automatic drainage: Under normal circumstances, the door drainage valves will automatically open when the door is closed, due to the squeezing action, serving the main purpose of automatic drainage.
Was this review help?
10
3
Share
DePeyton
09/16/25 2:02am
I remember how annoying it was when my Cayenne's doors accumulated water. It happened last rainy season after I parked under a tree for a week—opening the door caused water to pour out directly from inside. The main issue was that the small drainage holes at the bottom of the doors were clogged with leaves and mud. These holes are designed to allow rainwater to drain properly. I found some tools, used a thick wire to fish out the debris, and rinsed it with clean water, which solved the problem. Now, I check these small holes every quarter, especially during spring and autumn when there are more leaves, to prevent blockages. If left unattended, the standing water can easily cause the inner steel panels of the doors to rust, and over time, the door/window motors may get damp and short-circuit, affecting overall safety. I recommend everyone develop a habit: on a dry day, open the doors to check for water stains and clean the drainage holes promptly—it saves both money and hassle.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

How Long Does a BMW System Upgrade Take?

BMW system upgrades typically take around 2 hours. A system upgrade involves programming the vehicle, and the modules that require programming cannot be manually selected. Here is a detailed introduction about BMW cars: 1. Overview: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW). The main series models include the 1, 2, 3, 4, 5, 6, 7, and 8 series. 2. Logo: The logo features a double-circle design with the letters "BMW" inscribed above the double circles. The entire emblem resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing BMW's long history and the company's consistent purpose and goals.
15
4
Share

What are the differences between Polo GTI and Golf GTI?

1. Different appearance: The Polo GTI is relatively plain, featuring only the GTI-specific alloy wheels and the GTI badges on the front grille and rear trunk. The Golf GTI comes with a specially designed aerodynamic kit from Volkswagen, giving it a commanding and stylish yet steady presence. 2. Different space: The Polo is an A0-class sedan with a relatively cramped interior, making it less suitable for larger individuals. The Golf is a standard A-class sedan that can meet the needs of most people.
5
3
Share

What is the reason for the broken spring of the Bora shock absorber?

Bora shock absorber spring breakage is caused by poor linkage coordination. The following are methods to check whether the shock absorber is damaged: 1. External surface: Generally, the external surface of the shock absorber is dry. If oil seeps out or hydraulic oil leaks from the piston rod, the shock absorber is damaged. 2. Rough roads: When driving on rough roads or speed bumps, if abnormal noises occur from the wheels, the shock absorber is damaged. Below are extended notes on Bora car first maintenance considerations: 1. Appointment: Make an appointment in advance. 2. Essentials: Bring necessary items such as the maintenance manual and vehicle license. 3. Records: Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration.
12
1
Share

What is the working principle of ABS?

ABS system, also known as the Anti-lock Braking System, operates on the following principle: During braking, ABS monitors speed signals from each wheel speed sensor. It closes the normally open input solenoid valve for wheels that begin to lock, maintaining constant braking force. If the wheel continues to lock, it then opens the normally closed output solenoid valve. This keeps the braking state at its optimal point, ensuring the best braking performance and maximum driving safety. ABS, short for Anti-lock Braking System, functions by automatically controlling the braking force during vehicle deceleration to prevent wheel lock-up. It maintains the wheels in a rolling-sliding state (with a slip ratio of about 20%), thereby maximizing the adhesion between the tires and the road surface. The ABS system primarily consists of four components: wheel speed sensors, electronic control unit (ECU), hydraulic unit, and ABS warning light. The wheel speed sensors detect the motion state of each wheel, generating sinusoidal AC electronic pulse signals. These signals are then processed by a modulator, converted into digital signals, and transmitted to the electronic control unit. The central electronic control unit (ECU) receives input signals from the wheel speed sensors. Using these parameters, it calculates wheel speed, vehicle speed, and slip ratio. Based on the slip ratio, it determines wheel status and issues control commands to the hydraulic unit. The hydraulic unit adjusts brake line pressure according to control commands, with the regulation process including pressure maintenance, pressure increase, and pressure reduction. The ABS warning light alerts the driver to potential system malfunctions. If the ABS warning light illuminates, it is advised not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, locked wheels could cause the vehicle to skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, which poses significant safety risks.
6
1
Share

How Many Hours Are Required for Driver's License Check-in?

Driver's license check-in hours are as follows: 1. Subject 1: 12 credit hours. 2. Subject 2: 14 to 16 credit hours, including 2 hours of theory and 12 to 14 hours of practical vehicle operation. 3. Subject 3: 24 credit hours, including 16 hours of theory and 24 hours of practical vehicle operation. 4. The daily study time for the driver's license must not exceed 4 credit hours. Additional information: When students practice in the car, they must fingerprint on the check-in calculator installed in the training vehicle and swipe the time card. After finishing the practice, they must swipe the card again. The card will record the student's driving practice time. Only when the required hours are met can the student schedule the exam.
13
5
Share

Differences Between Volkswagen Talagon and Teramont?

The main differences between Volkswagen Talagon and Teramont are as follows: Launch time differs: Teramont debuted in March 2017, while Talagon was officially launched in June 2021. Price varies:
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.