Why is there no sound when locking the Volkswagen Lamando?

2 Answers
JadeAnn
08/26/25 5:04am
There may be no sound when locking the Volkswagen Lamando due to the absence of an anti-theft system. Here is some information about anti-theft systems: 1. Introduction: Anti-theft (pickproof) refers to preventing the malicious taking, stealing, snatching, robbing, or theft of various tangible and intangible properties. The key lies in prevention. 2. Selection: Choose high-quality locks, preferably using two different types of locks simultaneously. Although double locks may not completely prevent theft, they at least create difficulties for thieves, making them think twice, thereby greatly improving security. 3. Precautions: When parking your vehicle, don't be afraid of the hassle. Even for short stops, remove cash, valuables, and bags from the interior and trunk to prevent break-ins and theft.
Was this review help?
16
2
Share
MichaelRose
09/08/25 6:56am
When I drive the Volkswagen Lamando, I don't hear the locking sound, which is actually quite normal. Some car models are designed to reduce noise pollution, especially in urban areas where loud locking sounds can disturb neighbors, so the Volkswagen Lamando may default to silent locking. You can check the vehicle settings and look for the sound prompt option in the dashboard menu to turn it on. Sometimes the function is accidentally turned off, or there might be a minor issue with the horn or alarm system. If you're unsure, visit a 4S shop to have them check if the wiring is functioning properly. Overall, this doesn't affect the locking function, as you can still confirm it by the flashing lights. For driving safety, make sure to check for the folding mirrors or flashing light prompts after each lock, and you'll get used to it.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Under what circumstances should the vehicle speed not exceed 15?

When a motor vehicle passes through an unattended railway crossing, the speed should not exceed 15. Here is additional information: 1. No U-turns: Motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections of road prone to danger. 2. Common knowledge: At a crossroads, when the left-turn signal is red and the straight-ahead signal is green, you cannot make a left turn or U-turn. This is because when the straight-ahead signal is green, vehicles from the opposite direction are also going straight, and making a U-turn would obstruct the normal flow of oncoming straight-ahead traffic, which is definitely not allowed as it violates the Road Traffic Safety Law. When the left-turn signal turns green, the straight-ahead signal for the opposite direction usually turns red, making it safer to make a U-turn at that time.
15
4
Share

Can You Still Drive with a Run-Flat Tire at 0 Pressure?

When a run-flat tire has zero pressure, the vehicle can still be driven at approximately 80 km/h for about 80 kilometers. However, if the run-flat tire indeed has zero pressure, it is advisable to avoid continuing to drive unless absolutely necessary, to prevent further damage to the tire. Driving long distances under such conditions may cause the wheel rim to deform and render the tire unusable. Below are the functions of automotive tires: 1. Support the entire weight of the vehicle: Bear the vehicle's load and transmit forces and moments in other directions. 2. Transmit traction and braking torque: Ensure good adhesion between the wheel and the road surface to enhance the vehicle's power, braking, and off-road performance; work in conjunction with the vehicle's suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Prevent damage to vehicle components: Protect vehicle parts from severe vibrations and premature wear, adapt to high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency.
10
1
Share

Are Annual Inspection and Annual Review the Same Thing?

Annual inspection and annual review are not the same thing. The following are the differences between annual inspection and annual review: 1. Different aspects of inspection: Vehicle annual inspection is a performance test for the car, while annual review is an examination of aspects such as driving license fees and penalty points. 2. Different targets: Annual inspection targets the vehicle, while annual review targets both the vehicle and the driver. 3. Different inspection methods: Car annual inspection refers to the detection of abnormal sounds in the vehicle, equivalent to giving the car an annual physical examination. It includes the vehicle's chassis, bumper, horn, etc., using a step-by-step troubleshooting method to thoroughly inspect the car and promptly identify issues to prevent situations where the owner cannot drive normally. Car annual review refers to the inspection of not only the car itself but also the driver, the motor vehicle driving license, and car insurance. Before conducting the annual review, all traffic violations must be handled; otherwise, the annual review cannot be passed.
14
4
Share

What is the maximum wading depth for the Wuling Zhiguang?

The safe wading depth for the Wuling Zhiguang is 26 centimeters. Here are the relevant details: 1. Impact: Problems can occur if the water level rises above the tires. The greatest risks during vehicle wading are damage to the engine and electrical systems. Water entering the engine intake can directly affect the engine, and the electrical systems are highly sensitive to water. Therefore, the water level must never exceed the tires, as this could lead to water entering the cabin or the engine. 2. Precautions: If the vehicle stalls while wading, do not attempt to restart it. Forcing a restart can cause the engine to ingest more water, leading to severe damage. Theoretically, the water should not submerge the engine intake. The engine intake is located at the front grille radiator. The water level, including waves created while moving, should not exceed the area from the front bumper to the lower edge of the grille, as this is the tolerable range.
5
3
Share

Does Using Air Conditioning in New Energy Vehicles Consume a Lot of Electricity?

For gasoline-powered vehicles, turning on the air conditioning increases fuel consumption by 1-2 liters per 100 kilometers, and the fuel consumption is 1-2 liters per hour when idling with the air conditioning on. In contrast, electric vehicles use the battery pack to supply power to both the air conditioning system and the powertrain separately, which does not increase the burden on the electric motor. Regardless of the driving speed, the air conditioning consumes 1.62 kWh per hour. The advantages of new energy vehicles are as follows: 1. Low operating costs: For example, the BAIC EU260 has costs similar to the price of 1 liter of fuel. 2. No license plate restrictions: Those who have participated in BAIC New Energy's ternary test drive events know that the biggest advantage of new energy vehicles is the absence of license plate restrictions in large cities. 3. Stable driving with no gear shift impact: Since most new energy vehicles use a single-speed transmission, they generally do not experience gear shift impacts. 4. More environmentally friendly: Finally, the primary design function of new energy vehicles is environmental friendliness. They use electricity as the main power source, saving a significant amount of fuel and contributing to environmental protection efforts.
20
3
Share

Driving Test Subject 2 Tips?

Driving Test Subject 2 Tips 58 Auto recommends keeping the speed slow and staying calm. Below are specific tips for Driving Test Subject 2: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. As long as the car doesn't stop, try to keep the speed as slow as possible—the slower, the better. A slow speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, be sure to adjust the rearview mirrors properly, as this is particularly important for reversing into a parking space and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to accurately identify and observe these points to ensure precise execution. 4. Pay attention to the four corners of the car: The front corner of the car is prone to crossing the outer line when reversing into a parking space, while the rear corner is prone to crossing the side lines of the parking space. The front corner may go out of line during curve driving and right-angle turns. During parallel parking, the front corner may cross the outer line or the left front corner of the parking space, while the right rear corner may cross the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.