Why is there no sound when locking the Haval M6 Plus?

Why does the brake suddenly become hard and difficult to press while driving?

When the brake suddenly becomes hard and difficult to press while driving, it is usually related to a vacuum booster pump failure. Here are the reasons and solutions for a hard brake: 1. Vacuum booster pump air leakage: Under normal driving conditions, the negative pressure in the intake manifold absorbs air from the vacuum booster pump, keeping it in a charged state. If the brake becomes hard on the first press, it indicates air leakage in the vacuum booster pump. Solution: Replace the vacuum hose. 2. Speed too low, gear too high: Under normal driving conditions, the negative pressure in the intake manifold absorbs air from the vacuum booster pump, keeping it in a charged state. If the brake becomes hard after pressing it once, it may be due to insufficient intake negative pressure caused by low speed and high gear. Solution: Increase speed. 3. Leakage in the connecting hose: A leaking hose can lead to insufficient vacuum, causing the brake to lose its boosting effect and become hard. Solution: Check the vacuum hose to ensure it is properly sealed and restore normal operation.

10

2

Share

What to do if the car AC switch light is not on?

AC switch is damaged. More information about the car AC switch is as follows: 1. Overview: The car AC switch is simply the cooling switch of the air conditioner. AC stands for "Air conditioning", which means air conditioning device. This button controls the opening and closing of the compressor, and the car air conditioner can cool down by the operation of the compressor. 2. Others: After the car air conditioner is turned on, the air conditioner will blow air because the blower in the air conditioning system starts to work at this time, so there is wind blowing out, but the air conditioning cooling system has not started yet because the air conditioning compressor has not started to work. After the AC switch is turned on, the car computer receives the signal from the AC switch, and then the car computer will send a signal to the air conditioning compressor. The air conditioning compressor starts to work after receiving the instruction, and the cooling of the car air conditioner starts to work at this time.

2

Share

What is the difference between 6AT and CVT transmissions?

AT transmissions have excellent load-bearing capacity but are not as smooth as CVTs and are more costly; CVTs offer superior smoothness and lower costs but have limited load-bearing capacity. The specific details are as follows: 1. 6AT Transmission: The torque-bearing capacity of a 6AT transmission is very strong, which is why off-road vehicles use AT transmissions—even heavy loads pose no problem for AT transmissions. The previous notion that AT transmissions are not fuel-efficient can almost be dismissed, as modern AT transmissions are highly advanced. However, the smoothness of AT transmissions still cannot compare to CVTs, and they are more expensive. 2. CVT Transmission: CVT transmissions provide excellent fuel economy, unmatched driving smoothness, effectively reduce emissions, and are cost-effective. However, when subjected to excessive loads, they are prone to slipping, and extreme loads may even cause the steel belt to break. For typical family cars, the load is usually not enough to reach the breaking point.

6

4

Share

Can the Qulong Light Bee be registered for a license plate?

The Qulong Light Bee can be registered for a license plate as it is classified as an electric vehicle. Below is the relevant information: Introduction: The Light Bee is a high-performance crossover electric off-road bicycle developed by Hangzhou Qulong Technology. Officially defined as a new category between an off-road motorcycle and a downhill bicycle, it features simple operation, lightweight and convenient design, strong off-road capability, high playability, and ample room for modifications. After a preliminary experience with the Light Bee, Xiao Qi already has his own positioning for it and initial ideas for modifications. Body Dimensions: The Light Bee measures 1885×780×1050 (mm) in length, width, and height, with a wheelbase of 1265mm and a curb weight of 50kg. Its body size is slightly larger than that of a mountain bike in the same class but smaller than a typical off-road motorcycle, with its weight also falling between that of a mountain bike and an off-road motorcycle in the same class.

15

4

Share

Is the BMW 340i available in China?

BMW 340i has been launched in China. Relevant information about BMW is as follows: Introduction: BMW, the full Chinese name being Bayerische Motoren Werke AG, is a German automobile brand. BMW's vehicle series include i, X, Z, and pure numeric models, with series such as 1, 2, 3, 4, 5, 6, 7, and 8. Logo meaning: B.M.W. stands for Bayerische Motoren Werke. The colors and combination of the logo are derived from the state emblem of Bavaria, where BMW is headquartered. BMW initially started as an aircraft engine manufacturer, leading many to believe the logo represents a rotating propeller, but this is not the case. The blue and white symmetrical pattern is actually the state emblem of Bavaria, symbolizing BMW's pure Bavarian heritage. Like Mercedes-Benz, BMW pursues high quality, high performance, and advanced technology in its vehicles. Although BMW's production volume is not high, it enjoys a reputation nearly equal to that of Mercedes-Benz in the global automotive industry and among consumers. BMW's acceleration and high-speed performance are among the best in the world, making it the preferred choice for police vehicles in many countries.

8

1

Share

Why is the handbrake not holding tight?

The handbrake cannot hold even when pulled to the top. You can adjust the tension wheel yourself, and slightly rub the drum after installation. More information about the handbrake is as follows: 1. Overview: The parking brake, commonly known as the handbrake, functions to provide resistance to the car when parked, preventing it from rolling. The parking brake, also known as the handbrake or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. The force of the parking brake is much less than that of the service brake, just enough to prevent the car from rolling on a slope. 2. Others: The Electronic Parking Brake (EPB: Electrical Park Brake) integrates the temporary braking during driving and the long-term braking after parking, and realizes the parking brake through electronic control. The electronic handbrake is a technology that realizes parking braking through electronic control. Its working principle is the same as that of the mechanical handbrake, both of which use the friction between the brake disc and the brake pads to achieve parking braking, except that the control method has changed from the previous mechanical handbrake lever to an electronic button.

11

2

Share

Why is there no sound when locking the Haval M6 Plus?

Why does the brake suddenly become hard and difficult to press while driving?

What to do if the car AC switch light is not on?

What is the difference between 6AT and CVT transmissions?

Can the Qulong Light Bee be registered for a license plate?

Is the BMW 340i available in China?

Why is the handbrake not holding tight?

What to Do If the Driver's License Renewal is Delayed?

Where Does the Carbon Deposits Cleaned by Fuel Additives Go?

What causes crankshaft pulley noise?

Do You Need to Press the Brake When Starting a Car?