Why is there no sound when locking the Haval Big Dog?

What Causes a Car Air Conditioner to Heat but Not Cool?

There are several reasons why a car air conditioner may heat but not cool: 1. Damaged expansion valve: There's a saying in the air conditioning compressor world, "Low pressure high, high pressure low, replace the compressor." The probability of air conditioning compressor damage is not high, but faults in the expansion valve and throttle valve directly lead to poor air conditioning cooling. 2. Lack of refrigerant: Because the sealing device of the air conditioner is not absolutely airtight, the refrigerant in general air conditioners tends to dissipate. Therefore, ordinary vehicles need to add refrigerant every 2-3 years. Some cars may even require it once a year. If the car air conditioner performs poorly in cooling and starts to malfunction shortly after adding refrigerant, this usually indicates a condenser leak. The method to check for leaks is quite laborious. Generally, fluorescent dye is added to the refrigerant oil, and a special glass is used to inspect the system, allowing the leak point to be identified.

19

0

Share

What is the Difference Between 1.5T and 1.6L Engines in Cars?

The differences between 1.5T and 1.6L engines in cars lie in the engine type, power performance, and fuel consumption. Both 1.5T and 1.6L represent the displacement of the car engine. 1.5T refers to a 1.5L turbocharged engine, while 1.6L represents a 1.6L naturally aspirated engine. Engine Difference: The 1.5T engine is equipped with a turbocharger. The fundamental difference between a turbocharged and a naturally aspirated engine is that the turbocharged engine increases the intake air volume by adding a turbocharger. Since a turbocharged engine can achieve greater power output with the same fuel consumption, the power of a 1.5T engine is over 40% higher than that of a 1.6L engine. Simply put, the power output of a 1.5T engine is equivalent to that of a 1.8L engine. Power Performance Difference: The 1.6L engine delivers smoother power output but slower acceleration, while the 1.5T engine, with its larger intake air volume, accelerates faster within 0-100 km/h. Fuel Consumption Difference: The 1.5T engine is more fuel-efficient. The horsepower output of the 1.5T engine is 180, compared to 125 for the 1.6L engine. This means that when producing the same horsepower, the 1.5T engine consumes at least 1.2L less fuel per 100 km than the 1.6L engine.

16

3

Share

What does lift mode mean?

Luxury cars are generally equipped with a chassis lifting device, also known as air suspension. Typically, models equipped with air-adjustable suspension have ground clearance sensors near the front and rear wheels. Based on the output signals from these sensors, the vehicle's computer determines changes in body height and then controls the air compressor and exhaust valves to automatically compress or extend the springs, thereby reducing or increasing the chassis ground clearance to enhance high-speed stability or improve passability on rough terrain. Below are several states of air suspension: 1. Maintenance state: When the vehicle is lifted by a jack and leaves the ground, the air suspension system will close the relevant solenoid valves, and the computer will memorize the body height to maintain the original height after the vehicle is lowered. 2. Normal state: This refers to the engine running state. During driving, if the body height changes beyond a certain range, the air suspension system will adjust the body height at regular intervals. 3. Wake-up state: When the air suspension system is activated by the remote key, door switch, or trunk lid switch, the system will check the body height using the level sensors. If the body height is below the normal height by a certain degree, the air storage tank will provide pressure to raise the body to the normal height.

1

4

Share

What to Do When There's a Loud Noise When Shifting Gears Without Pressing the Clutch?

If the clutch pedal is not pressed when shifting gears, the gears will interfere with each other during engagement, resulting in abnormal noise. Below are the specific details: The reason is that the speed difference between the driving gear and the driven gear is too large. Shifting gears without pressing the clutch can damage the gears inside the transmission. It is recommended not to do this, as it can cause severe damage to the transmission. When shifting gears, always press the clutch pedal quickly and fully to the floor to ensure smooth gear shifting. The clutch, which is part of the car's transmission system, is installed between the engine and the transmission. Its function is to connect or disconnect the engine and the transmission. When the driver presses the clutch pedal, the clutch disengages, and when the clutch pedal is released, the clutch engages. The clutch pressure plate is fixed to the engine's flywheel, and the clutch disc is located beneath the pressure plate.

9

0

Share

Which is better, Audi A6 Quattro 45 or 50?

Here is a comparison between the Audi A6 Quattro 45 and 50: Minimum ground clearance differs: Audi A6 Quattro 45 has a minimum ground clearance of 117mm; the 50 has a minimum ground clearance of 124mm. Top speed differs: Audi A6 Quattro 45 has a top speed of 240 km/h; the 50 has a top speed of 250 km/h. Fuel tank capacity differs: Audi A6 Quattro 45 has a fuel tank capacity of 73L; the 50 has a fuel tank capacity of 82L. Dimensions differ: The Audi A6 Quattro 45 measures 5038mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm; the 50 measures 5302mm in length, 1945mm in width, and 1487mm in height, with a wheelbase of 3128mm.

3

4

Share

What is the real fuel consumption of the Bentayga PHEV?

The Bentley Bentayga PHEV has a fuel consumption of approximately 9.5 liters per 100 kilometers, which is quite impressive. Below is a detailed introduction to the Bentley Bentayga PHEV: Powertrain: The Bentley Bentayga PHEV is a plug-in hybrid SUV, equipped with a 3.0-liter turbocharged engine. This engine delivers a maximum power of 250 kW and a maximum torque of 450 Nm. It features direct fuel injection technology and an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 94 kW and a maximum torque of 350 Nm. Configuration: The Bentley Bentayga PHEV uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. It comes with a full-time four-wheel-drive system and is equipped with a Torsen central differential. The full-time four-wheel-drive system with the Torsen central differential offers exceptional performance.

14

2

Share

Why is there no sound when locking the Haval Big Dog?

What Causes a Car Air Conditioner to Heat but Not Cool?

What is the Difference Between 1.5T and 1.6L Engines in Cars?

What does lift mode mean?

What to Do When There's a Loud Noise When Shifting Gears Without Pressing the Clutch?

Which is better, Audi A6 Quattro 45 or 50?

What is the real fuel consumption of the Bentayga PHEV?

What does Volvo Asia Pacific version mean?

Is a Rich Air-Fuel Mixture Due to Excess Fuel or Excess Air?

Is Light Braking Required for Straight-Line Driving in Subject 3?

Where is the radiator located in the X-Trail?