···
Log in / Register

Why is there no sound when locking the BYD Song?

4 Answers
StellaMarie
07/29/25 2:54pm

The reason why there is no sound when locking the BYD Song is that the locking sound setting is not enabled. The owner needs to find the locking sound option in the vehicle settings menu and turn it on. Taking the BYD Song 2021 Classic Edition 1.5T Manual Comfort Model as an example, its dimensions are 4600mm in length, 1830mm in width, and 1700mm in height, with a wheelbase of 2660mm, a fuel tank capacity of 63 liters, and a curb weight of 1568kg. The front suspension of this vehicle is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum power of 118kW, and a maximum torque of 245Nm, paired with a 6-speed manual transmission.

Was this review help?
8
4
Share
MacFinn
08/13/25 7:27am

I just encountered a situation where my BYD Song didn't make any sound when locking, and found it's quite common. It might be that the sound setting was turned off. Go to the settings menu in the car's infotainment system, find the lock confirmation sound option, and turn it on. Or the horn might be faulty—check if the horn wires are loose or if a fuse has blown. Another possibility is that a door isn't fully closed, so I'd pull each door to confirm. The locking sound is important as it confirms the car is locked. Without it, if I leave without confirming, the car could be at risk of theft. I suggest restarting the infotainment system first. If that doesn’t work, check the fuse box or visit a 4S shop for a professional inspection—don’t compromise safety.

Was this review help?
4
3
Share
Expand All
NovaFitz
10/11/25 5:14am

As someone who has driven for several years, I can say that the silent locking issue with the BYD Song is usually a minor problem. First, consider whether you've turned off the alert sound: check the sound settings on the central control screen to ensure the locking prompt is enabled. Another common cause is a faulty horn, possibly due to aging or moisture in the wiring, especially during the rainy season. I've encountered a similar issue—testing the horn by locking the car with the key. If it doesn't sound, you'll need to check the fuse or replace the horn. Although the locking sound is subtle, it's very practical for preventing misoperations. Addressing it promptly can save you trouble; just check the car settings or fuse box yourself, and don't wait until a major issue arises.

Was this review help?
7
3
Share
Expand All
ZacharyAnn
11/24/25 6:21am

A silent car lock is no small matter, especially for the BYD Song's anti-theft alert tone. I believe the most common issue lies in the settings: check the sound toggle in the infotainment system. If that doesn't work, it could be a faulty horn or a short circuit—high summer temperatures often trigger such faults. Promptly inspect whether the fuse is blown, but don't risk DIY testing by opening the cover. Whenever my car locks silently, I always double-check if the doors are truly secured to avoid safety hazards. This minor glitch hints at bigger problems—address repairs promptly when needed.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

Is Wheel Balancing Necessary After Patching a Rear Tire?

Wheel balancing is necessary after patching a rear tire, especially if the tire was removed for repair or if the patched area is relatively large. The specific reasons are as follows: Wheel balancing directly affects driving safety. If balancing is not performed after patching, the wheel may not rotate smoothly, leading to issues such as vehicle vibration and steering wheel shaking while driving. This is particularly noticeable at high speeds, where the vibration becomes more pronounced with increased speed. Symptoms of poor rear wheel balance include: 1. Vehicle vibration: Generally, poor rear wheel balance can cause vibration, though it may not be as obvious as with the front wheels. 2. Abnormal tire wear: Wheel balancing corrects uneven mass distribution. At high speeds, uneven mass distribution can become more pronounced, leading to irregular tire wear. 3. Increased fuel consumption: Poor wheel balance can increase driving resistance, thereby raising fuel consumption.
6
0
Share

Can I Take the Manual Transmission Test After Passing the Automatic Transmission Test?

You can take the manual transmission test after passing the automatic transmission test, but you will need to retake all the exams. Below is some relevant information about automatic transmissions: 1. Automatic Principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume about 10% more fuel than manual transmissions. Whether manual or automatic, more gears usually mean better fuel efficiency. 2. Driving Tips: For manual transmission vehicles, it's recommended to shift gears at higher RPMs. Engines are designed to operate optimally at higher RPMs, with parameters like dynamic balance and rotational inertia set for high-speed performance. Prolonged operation at non-optimal RPMs increases internal component load and wear, leading to frequent vibrations and knocking, which can reduce engine lifespan. Shifting at 3000 RPM ensures the post-shift RPM stays around 2300, keeping the engine within a healthy operating range.
3
5
Share

Should You Engage the Gear or Press the Clutch First Before Driving?

Before driving, you should engage the gear first and then press the clutch. Here are some key points to note when operating a manual transmission car: 1. Pressing: Master the pressing of the clutch pedal through practice to develop a good habit—press it all the way down and release it slowly. 2. Releasing: Coordinate the throttle and clutch. When starting, engage first gear, slowly release the clutch, and apply the throttle in the semi-clutch state. Only release the clutch completely after the car starts moving. 3. Shifting: Master the timing of shifting. Shift gears when the engine speed is around 2000 RPM—first press the throttle and then the clutch to prevent the clutch from being forced to disengage. Then shift gears. The shifting sequence must be first gear, second gear, third gear, fourth gear, and fifth gear. Skipping gears is not recommended. Downshift according to the vehicle speed.
5
0
Share

What is the normal pressure range for car air conditioning?

Under normal operating conditions of the air conditioning system, the low pressure typically ranges between 1.0—2.5 bar, while the high pressure ranges between 15—18 bar. Additional information: 1. Normal pressure range: The standard range for car air conditioning pressure is generally that the high pressure should not exceed 1.7 MPa or fall below 1.3 MPa, while the low pressure should normally be no lower than 1.15 MPa and no higher than 1.25 MPa. If the low pressure is higher or lower than this normal range, it indicates improper adjustment of the expansion valve. 2. Evaporator wear: The car air conditioning evaporator, fan, and other components are often in a closed and dark state, creating a high-temperature and humid internal environment. Impurities, dust, bacteria, and viruses from the air enter the air conditioning system and combine with condensed water, clogging components such as the evaporator. Over time, this leads to the accumulation of dirt, nicotine, mold, fungi, and other contaminants.
4
2
Share

How often should the transmission fluid be changed for a Toyota Reiz?

Toyota Reiz requires transmission fluid replacement every 80,000 kilometers. The Reiz is a sporty B-segment sedan under Toyota, featuring rear-wheel drive. Its front suspension employs a double-wishbone independent suspension, while the rear utilizes a multi-link independent suspension. The multi-link independent suspension is an evolution of the double-wishbone design, where the two wishbones are replaced with separate links. The Reiz's headlights feature a sharper design, giving the front fascia a resemblance to the Lexus ES model. The taillights adopt an irregular contour, with the high waistline extending to the rear and integrating with the trunk, ultimately merging with the ducktail spoiler. This creates smooth side profiles while visually enhancing the vehicle's substantial presence.
3
0
Share

How to reset the one-button start maintenance reminder for Geely Vision S1?

Turn off the ignition switch, press the left-right directional button on the right side of the multifunction steering wheel, then press the one-button start to power on the vehicle. After five seconds, release the button, and the dashboard will display a reset prompt. Press and hold the SET button for more than five seconds, then press the MODE button, and finally turn off the vehicle. Below is some relevant information about the Geely Vision S1: 1. Introduction to the Geely Vision S1: The Geely Vision S1 is the second strategic model from Geely Auto in the crossover SUV market. 2. Core values: The letter "S" in the name Geely Vision S1 represents the five core values of the product: Sharp (stylish design), Smart (convenient connectivity), Safe (comprehensive protection), Satisfying (comfortable experience), and Sporty (dynamic driving pleasure).
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.