Why is there no sound when connecting to car Bluetooth?

1 Answers
SabrinaMarie
07/25/25 7:07am
There are many reasons why there is no sound when playing music via car Bluetooth, including the car multimedia system volume not being turned on, the phone volume not being turned on, incompatibility between the phone and the car's computer, and Bluetooth signal interference. The following are related explanations about no sound in car Bluetooth: 1. Car multimedia system volume not turned on: If there is no sound when playing music via car Bluetooth, the first thing to check is whether the car multimedia system volume is turned on. If the volume is not turned on or is muted, there will naturally be no sound when playing music. 2. Phone volume not turned on: In this case, you need to increase the phone volume or ensure the phone is not in silent mode. 3. Incompatibility between phone and car computer: If the phone and computer are incompatible, issues may arise such as inability to connect to Bluetooth or error codes appearing after connection. 4. Bluetooth signal interference: When there are too many electronic devices in the car or when passing through areas with weak signals, Bluetooth signal interference may occur.
Was this review help?
17
2
Share
More Forum Discussions

Where is the cabin air filter located in the Nissan Qashqai?

The cabin air filter in the Nissan Qashqai is located inside the interior trim panel in front of the driver's footwell. The cabin air filter ensures a tight seal with the housing to prevent unfiltered air from entering the cabin, effectively separating solid impurities such as dust, pollen, and abrasive particles from the air. Functions of the cabin air filter: It absorbs moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air; prevents car windows from fogging up, ensuring clear visibility for drivers and passengers, thereby enhancing driving safety. The Qashqai is a compact SUV under Dongfeng Nissan, featuring a MacPherson strut independent front suspension and a multi-link independent rear suspension. The dimensions of the Qashqai are 4401mm in length, 1837mm in width, 1593mm in height, with a wheelbase of 2646mm.
16
1
Share

What is the method for removing ETC?

ETC removal method: The back of the ETC device is attached with double-sided tape. You can use a heat gun to warm it up, then carefully remove it with a small plastic scraper and wipe the area clean with a cloth. Note that removing the ETC device yourself will deactivate it, and you must bring your vehicle's registration certificate to the ETC service provider for reactivation. ETC (Electronic Toll Collection) is a system also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. It works through dedicated short-range microwave communication between the vehicle-mounted electronic tag (installed on the windshield) and the microwave antenna in the ETC lane at toll stations. This system utilizes computer networking technology to process payments via bank backend settlement, allowing vehicles to pass through toll stations without stopping to pay toll fees.
14
4
Share

How to Check the Score of Subject 2 Driving Test?

Methods to check the score of Subject 2 driving test: 1. After the test, you need to sign the test score sheet, which will display your test score. Verify your information and test score before signing; 2. Check your test score on the official website of the Traffic Safety Comprehensive Service Management Platform. Subject 2 is part of the motor vehicle driver's license examination, referred to as the field driving skills test. For small vehicles C1 and C2, the test items include reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. For large vehicles A1, A2, A3, B1, and B2, the test items include stake test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving through curves, turning at a right angle, passing a width-limited gate, passing continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, and simulating highway driving, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.
9
5
Share

How to Turn On the Low Beam Lights on the Envision?

Method to turn on the low beam lights on the Envision: The low beam lights can be activated by setting the switch to 'auto' and adjusting to the low beam position - they will automatically illuminate in low light conditions. Alternatively, manually turn the headlight switch to the far right position to activate the headlights. Low beam lights are designed for close-range illumination, featuring a wide coverage area but short projection distance, with non-adjustable focus. The Envision measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. This vehicle comes equipped with a newly designed intelligent drag-reducing grille, aluminum roof rails, chrome dual exhaust pipes with a fresh design, 19-inch multi-spoke aluminum alloy wheels, and multi-function exterior rearview mirrors.
2
5
Share

Can a Car with Tuned ECU Pass the Annual Inspection?

Can a Car with Tuned ECU Pass the Annual Inspection? If only stage 1 tuning is performed, meaning only the ECU data is modified without altering the original state of hardware components such as the exhaust system and catalytic converter, the vehicle can pass the annual inspection without issues. For stage 2 tuning, it is also possible to pass the inspection by using a high-flow catalytic converter. However, stage 3 tuning will definitely fail the annual inspection. The annual vehicle inspection refers to the yearly examination of vehicles that have already obtained official license plates and registration certificates, conducted according to the technical requirements for motor vehicle operational safety. The purpose is to check the main technical conditions of the vehicle, encourage proper maintenance, and ensure the vehicle remains in good condition, thereby guaranteeing driving safety.
16
3
Share

What brand of transmission is used in the Lavida?

The Lavida uses an Aisin brand transmission, which is a 6-speed automatic manual transmission. The Lavida 1.4T model is equipped with a DSG dual-clutch transmission independently developed by Volkswagen. The 2017 Volkswagen Lavida offers three engine options: 1.2T, 1.4T, and 1.6L, paired with a 7-speed dual-clutch transmission, 5-speed manual or dual-clutch transmission, and 5-speed manual or 6-speed automatic manual transmission, respectively. The Lavida is the first A-segment car independently developed by Shanghai Volkswagen. The dimensions of this car are 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. Different Lavida models have different engine specifications. The Lavida 1.6L inline four-cylinder multi-point fuel injection engine has a maximum power of 77kw and a maximum torque of 155nm.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.