Why is there no sound in BMW multimedia system?

What is the 0-100km/h acceleration time of the 2.0T Teana?

According to official data, the 0-100km/h acceleration time of the 2.0T Teana model is 6.9 seconds. Factors affecting a vehicle's 0-100km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The BMW 320i has a maximum torque of 205 Nm and a 0-100km/h acceleration time of 9 seconds. The 2.0T Teana model has a torque of 270 Nm and a 0-100km/h acceleration time of 6.9 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Teana uses a continuously variable transmission (CVT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The BMW 320i has a power-to-weight ratio of 106 Hp/T and a 0-100km/h acceleration time of 9 seconds. The Teana has a power-to-weight ratio of 155 Hp/T and a 0-100km/h acceleration time of 6.9 seconds.

7

5

Share

What type of engine oil is suitable for the Regal?

The Regal uses 5W30 engine oil. Compared to 5W40 and 5W30, the low-temperature fluidity performance is the same, but the difference lies in the high-temperature performance. 5W40 has higher viscosity, providing better high-temperature protection and sealing performance. However, the increased viscosity results in greater engine running resistance and higher fuel consumption. For the Regal engine, 5W30 engine oil is more suitable. 1. Different Models For the Regal, depending on the vehicle configuration, the factory-fill engine oil is either dexos™ engine oil or engine oil that meets GM6094M or GM4718M standards. When changing the engine oil, if the engine oil filler cap has a dexos logo, it is recommended to use engine oil with the dexos™ certification mark. The Regal is suitable for engine oil identified by the dexos™ certification mark. Look for and use engine oil that displays the dexos™ certification mark with the correct viscosity grade, or engine oil that meets General Motors GM6094M standard and is certified by the American Petroleum Institute (API), with a viscosity grade of SAE5W-30. For vehicles equipped with a Turbo engine, use engine oil that meets General Motors GM4718M standard and is certified by the American Petroleum Institute (API), with a viscosity grade of SAE5W-30. 2. Different Engines Naturally aspirated engines have lower requirements for engine oil and can use mineral oil or semi-synthetic oil. If the consumer's budget allows, fully synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate in more complex conditions, requiring higher-quality engine oil with better fluidity. It is best to use fully synthetic oil.

19

1

Share

What is the Difference Between Electromagnetic Suspension and Air Suspension?

Air suspension targets the springs, while electromagnetic suspension targets the shock absorbers. Detailed introduction: 1. Electromagnetic Suspension: Electromagnetic suspension is a new type of independent suspension system that utilizes electromagnetic reactions. It can respond within 1 millisecond to suppress vibrations and maintain vehicle stability under different road conditions. Even on the roughest roads, it can increase the contact area between the tires and the ground, reduce tire rebound, and control the vehicle's center of gravity shift and pitch/roll effectively. It also excels in controlling body sway during sharp turns or evasive maneuvers. 2. Air Suspension: It can adjust to the optimal setting for different road conditions, offering high comfort. By adjusting the damping, it can stiffen during cornering to provide better support for the vehicle while remaining relatively soft during normal driving to filter out unnecessary vibrations.

19

0

Share

Why Can't the Manual Transmission Car Key Be Pulled Out?

Manual transmission car keys cannot be pulled out due to: a malfunctioning ignition switch; or the steering wheel being locked left or right, jamming the ignition switch lock tongue. Precautions for vehicle startup: Manual transmission cars do not have a P gear. When starting the engine of a manual transmission car, you must shift into neutral and depress the clutch pedal to start the engine. For automatic transmission cars, before starting the engine, always ensure the gear is in P position and depress the brake pedal, otherwise the engine cannot be started. Precautions for driving: Pay close attention to traffic signals while driving. Be mindful of intersections, crosswalks, stop lines, etc., and increase the following distance, especially when behind large vehicles.

5

4

Share

What speed can a car handle when going over potholes?

When encountering large potholes, maintain a speed below 10 km/h or even lower. Here are relevant details: 1. Suspension System: It refers to all force-transmitting connection devices between the car's frame and axles or wheels. Its function is to transmit forces and torques acting between the wheels and the frame, while cushioning impacts from uneven road surfaces transmitted to the frame or body and dampening resulting vibrations to ensure smooth driving. Excessive impacts can damage the suspension, causing deformation and reduced performance. 2. Effects: Driving too fast over potholes can easily cause tire damage, especially for vehicles with stiff suspensions and heavy bodies. Therefore, when encountering similar road conditions, be sure to slow down. High-speed impacts with potholes can affect the suspension, mainly including four-wheel alignment parameters and chassis rubber bushings.

1

4

Share

What is the reason why Land Rover Bluetooth connection cannot play music?

It may be due to corrupted music files or the system being in mute mode. Below is the relevant information: 1. Car Bluetooth: Car Bluetooth is an in-vehicle wireless hands-free system designed based on wireless Bluetooth technology. Its main function is to connect with mobile phones via Bluetooth technology for hands-free calls during normal driving, aiming to free up hands and reduce traffic accident risks. 2. Current status of Bluetooth technology: In July 1999, Bluetooth SIG (Bluetooth Special Interest Group) officially released the Bluetooth 1.0 specification, improving the Bluetooth protocol framework based on draft versions 0.8, 0.9, and 1.0, advancing Bluetooth development to the practical application stage! The Bluetooth 1.0 specification mainly focuses on point-to-point wireless connections, such as wireless applications between mobile phones and computers, computers and peripherals, mobile phones and headphones, etc.

11

0

Share

Why is there no sound in BMW multimedia system?

What is the 0-100km/h acceleration time of the 2.0T Teana?

What type of engine oil is suitable for the Regal?

What is the Difference Between Electromagnetic Suspension and Air Suspension?

Why Can't the Manual Transmission Car Key Be Pulled Out?

What speed can a car handle when going over potholes?

What is the reason why Land Rover Bluetooth connection cannot play music?

Where are the car headlights and how to turn them on?

At what time does the 12123 point reset date restore 12 points?

Do I Need to Retake the Driving Test if My Driver's License Expires?

What are the 4 raindrops on the windshield wiper?